September 2019 - Celadon

Re: [01.org Celadon] Unable to boot into launcher on stable branch using 4K monitor + custom build

by Fan, Yugang

For “Can I just disable them in device/intel/project-celadon/cel_apl/device.mk ?”, GFX team can’t answer this as it related to whole system integration I think. For APL NUC 4K support, we didn’t find 4K EPIC. And APL NUC hardware EDS shows HDIM only support max resolution 4K 3840x2160 30fps, and we also known that 4K also met some flicker issues due to display buffer side limitation when enabling some GFX feature, e.g. RBC. APL IVI may can boot to 4K 3840x2160 60fps, but we don’t know if there are some other potential issue. For different result of APL IVI and APL tablet of 4K 3840x2160 60fps, I got info that we haven’t verified APL tablet for long time, there should has some diffs, but not sure if we need continue investigate it as no 4k EPIC found. Above are all I know, so possible way is: we start to verify 4K 3840x2160 30fps(but not sure it is make sense to use 30 fps for 4k, or force using 1080P 60 fps for big resolution) for APL if we need support 4K, and figure out if we need limit the max resolution to 4K 3840x2160 30fps in somewhere, e.g. some config files/vbt. Best regards, Yugang From: Dominik Louven [mailto:dlouven@videro.com] Sent: Thursday, May 9, 2019 11:58 AM To: Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> Cc: celadon(a)lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org Celadon] Unable to boot into launcher on stable branch using 4K monitor + custom build Hello everyone, Any news on this ? Best regards, Dominik Louven On 6. May 2019, at 12:12, Dominik Louven <dlouven(a)videro.com<mailto:dlouven@videro.com>> wrote: Hi Swaroop, Thank you in advance. To be a little more specific. I would like to exclude all car components from the cel_apl build. Can I just disable them in device/intel/project-celadon/cel_apl/device.mk ? Please let me know if you find a way to exclude the car components from the compilation , because my NUC is not embedded in a car =) Best regards, Dominik Louven On 6. May 2019, at 12:09, Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> wrote: Hello Dominik Please give me some time , I will check and let you know after taking a clean tablet build from GitHub Regards Swaroop From: Dominik Louven [mailto:dlouven@videro.com] Sent: Monday, May 6, 2019 3:26 PM To: Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> Cc: celadon(a)lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org> Celadon] Unable to boot into launcher on stable branch using 4K monitor + custom build Hello Swaroop, It works fine now, I can boot into OS with celadon_apl-userdebug. Is it possible to disable the car launcher and car applications in the build ? Best regards, Dominik Louven On 3. May 2019, at 12:24, Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> wrote: Hello Dominik Celadon is for tablet and cel-apl is for APL NUC IVI Regards Swaroop From: Dominik Louven [mailto:dlouven@videro.com] Sent: Friday, May 3, 2019 3:08 PM To: Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> Cc: celadon(a)lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org/> Celadon] Unable to boot into launcher on stable branch using 4K monitor + custom build Hello Swaroop, I used : lunch celadon-userdebug Maybe that’s the issue here. I will try again with your steps. What’s the different between the celadon and the cel-apl build ? Best regards, Dominik Louven On 3. May 2019, at 11:35, Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> wrote: Hello Dominic I used a local build based on WW13 BIOS VERSION --> AYAPLCEL.86A.0059.2018.1226.1422 We used below steps to compile • source build/envsetup.sh • lunch cel-apl-userdebug • make SPARSE_IMG=true flashfiles -j4 Regards Swaroop From: Dominik Louven [mailto:dlouven@videro.com] Sent: Friday, May 3, 2019 3:02 PM To: Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> Cc: celadon(a)lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org/> Celadon] Unable to boot into launcher on stable branch using 4K monitor + custom build Hello Swaroop, That is weird. Did you use the same manifest ww201913 ? What BIOS version is your NUC running on and do I have set specific settings in the BIOS ? Did you compile the OS with different steps ? Best regards, Dominik Louven On 3. May 2019, at 11:29, Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> wrote: Hello Dominik, When I connect my NUC6CAYH (APL) to an 4K Display (View Sonic) There was no issue for us in booting to home screen Regards Swaroop From: Dominik Louven [mailto:dlouven@videro.com] Sent: Friday, May 3, 2019 2:42 PM To: Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> Cc: celadon(a)lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org/> Celadon] Unable to boot into launcher on stable branch using 4K monitor + custom build Hello Swaroop, Thanks a lot. If you need any more information please let me know. Best regards, Dominik Louven On 3. May 2019, at 11:08, Balan, Swaroop <swaroop.balan(a)intel.com<mailto:swaroop.balan@intel.com>> wrote: Hello Dominik We are checking at our end , Will update shortly Regards Swaroop From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Dominik Louven Sent: Friday, May 3, 2019 1:49 PM To: celadon(a)lists.01.org<mailto:celadon@lists.01.org> Subject: [01.org<http://01.org/> Celadon] Unable to boot into launcher on stable branch using 4K monitor + custom build Hello everybody, I have checked out the latest stable branch ww201913.xml . When I connect my NUC6CAYH (APL) to an 4K Display (resolution 3840x2160) I am unable to boot into the launcher. The NUC hangs in android boot screen. What can I do ? Please find logs below : logcat https://pastebin.com/d8eGtPha dumpsys https://pastebin.com/UjrxC5PW bugreport https://drive.google.com/open?id=1oy9uQqqMpG_95Vsm4sUpH6pRjqnscPhN I am running the latest BIOS on my NUC and the os was compiled using : source build/envsetup.sh lunch celadon-userdebug make SPARSE_IMG=true flashfiles -j4 Best regards, Dominik Louven -- Celadon mailing list Celadon(a)lists.01.org<mailto:Celadon@lists.01.org> https://lists.01.org/mailman/listinfo/celadon

1 year, 5 months

8
9
0 / 0

Re: [01.org Celadon] Celadon Digest, Vol 17, Issue 18

by Gnanasekaran, Sundar

Hi Tapani, Please try below command from host side: adb tcpip 5555 Thanks, G Sundar -----Original Message----- From: Celadon <celadon-bounces(a)lists.01.org> On Behalf Of celadon-request(a)lists.01.org Sent: Friday, September 27, 2019 12:30 AM To: celadon(a)lists.01.org Subject: Celadon Digest, Vol 17, Issue 18 Send Celadon mailing list submissions to celadon(a)lists.01.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.01.org/mailman/listinfo/celadon or, via email, send a message with subject or body 'help' to celadon-request(a)lists.01.org You can reach the person managing the list at celadon-owner(a)lists.01.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Celadon digest..." Today's Topics: 1. Re: adb over wifi support (Tapani P?lli) ---------------------------------------------------------------------- Message: 1 Date: Thu, 26 Sep 2019 09:46:25 +0300 From: Tapani P?lli <tapani.palli(a)intel.com> To: "Badrappan, Jeevaka" <jeevaka.badrappan(a)intel.com>, Chih-Wei Huang <cwhuang(a)android-x86.org> Cc: "celadon(a)lists.01.org" <celadon(a)lists.01.org> Subject: Re: [01.org Celadon] adb over wifi support Message-ID: <df169abe-483a-7302-2509-30c45748cc6c(a)intel.com> Content-Type: text/plain; charset=utf-8; format=flowed Hi; On 9/24/19 6:32 PM, Badrappan, Jeevaka wrote: >> >> >> On 9/24/19 4:51 AM, Chih-Wei Huang wrote: >>> Badrappan, Jeevaka <jeevaka.badrappan(a)intel.com> ? 2019?9?23? >> ?? >>> ??10:31??? >>>>> Hello; >>>>> After I synced Celadon Q, I noticed adb over wifi does not seem to >>>>> work anymore. When trying to connect, I get 'connection refused'. >>>>> >>>>> Does someone know if there are some build options or perhaps >>>>> modifications to security options to make it work? >>>> >>>> Try the following commands. >>>> >>>> adb shell setprop service.adb.tcp.port 5555 go to CarSetting >>>> developer, re-start usb-debug adb connect <ip>:5555 >>> >>> Have you really tested it? > > Yes tested on KBL NUC commercial device which has adb over usb working. > >>> >>> Actually the property has already been set in current init.*.rc: >>> >>> on boot >>> ... >>> # adb over ethernet >>> setprop service.adb.tcp.port 5555 >>> >>> >>> But it still doesn't work. > Vendor init can't set the system property. So, even if it is set in > service.adb.tcp.port, it won't be set properly. You can confirm that > by querying the property value adb shell getprop > >> >> I tried re-starting usb-debug in 'developer options' to see if it >> matters but it still gives 'connection refused'. I could not do the >> 'adb shell' step command since that requires a working adb connection. > > Could you share the device you are using and also the BIOS version? > My device is KBL NUC, 7i5BNH (bios says 7i5BNB though), BIOS version is: BNKBL357.86A.0040.2017.0210.1749 I don't think BIOS matters though? Adb over wifi works fine with Android Celadon P with this same NUC. // Tapani ------------------------------ Subject: Digest Footer Celadon mailing list Celadon(a)lists.01.org https://lists.01.org/mailman/listinfo/celadon ------------------------------ End of Celadon Digest, Vol 17, Issue 18 ***************************************

1 year, 7 months

2
2
0 / 0

Repo Sync Failing on MediaSDK Generation

by Wade Wilson

Hi all, I have wiped my entire repo out (including .repo) and am still getting the same error. When I repo sync the latest update wave, everything downloads fine, but things error out when the root MediaSDK repo is checked out of .repo into the build tree. (It's the MediaSDK in the main repo, not the MediaSDK_open repo). Since repo sync crashes, I can't build right now. Anyone else having this issue? Thanks. ---- Wade Wilson Your friendly neighborhood *pool* guy.

1 year, 7 months

1
1
0 / 0

adb over wifi support

by Tapani Pälli

Hello; After I synced Celadon Q, I noticed adb over wifi does not seem to work anymore. When trying to connect, I get 'connection refused'. Does someone know if there are some build options or perhaps modifications to security options to make it work? Thanks; // Tapani

1 year, 7 months

3
6
0 / 0

1st CaaS and CIC Pre-Production Android 10 Release Announcement

by Wang, Jian W

[cid:image002.jpg@01D57307.44B90880] Android 10 CELADON CaaS & CIC release [cid:image008.png@01CF54D4.99DD97B0] 24-Sept-2019-Celadon team announces 1st CaaS and CIC Release (Based Android 10 Dessert ) * CaaS (Celadon As a Service) and CIC (Celadon In Container) Android 10 is supported on Intel X86 Platforms with running Android via various Bare Metal x86 machines, Virtual Machines (KVM/Qemu), and also Container (lunch target : caas and cic). * This is a Pre-Production CaaS and CIC Release for ONLY evaluation and development purposes. * Documentation: https://01.org/projectceladon/documentation/getting_started/as-service * Release manifest: https://github.com/projectceladon/manifest.git * Release note: https://01.org/projectceladon/documentation/release_notes#sept-2019 * ONS Presentation: https://static.sched.com/hosted_files/onseu19/10/Android_at_the_edge_ONS_... Important Notes and Remarks<https://github.com/projectceladon/celadon-documentation/blob/master/sourc...> |C|<https://github.com/projectceladon/celadon-documentation/blob/master/sourc...> build has been validated on |NUC|<https://github.com/projectceladon/celadon-documentation/blob/master/sourc...> Kit NUC7i5DNH<https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc...>E in the following function domains. Boot up function is supported on more Intel@ X86 platforms. * Bare Metal: Test Case Result Image Flash Pass System Boot Up Pass WIFI WEB_BROWSING Pass Bluetooth Pair Pass Ethernet Browner Pass Media Local Playback Pass Video H264 Decode Pass Audio Playback Pass Adb over USB pass Adb over WIFI Pass Adb over Ethernet Pass USB storage Pass Touch Screen Pass Touch Screen Zoom In/Out Pass * VM (Qemu-KVM) Test Case Result Comment Image Flash Pass System Boot Up Pass Ethernet Browner Pass in Host OS clear Linux, make sure service systemd-networkd is up: Check: systemctl status systemd-networkd Enable: systemctl enable systemd-networkd Media Local Playback Pass Video can be displayed but still overlay blue screen after using command : adb shell service call Surface Flinger 1008 i32 1 Audio Playback Pass Pass on USB devices (audio etc.) passthrough: Add "-device usb-host,vendorid=,productid=" into startandroid_qcow2.sh. Adb over Ethernet Pass USB storage Pass Add "-device usb-host,vendorid=,productid=" into startandroidqcow2.sh. Touch Screen Pass Touch Screen Zoom In/Out Pass * Container (Only cover Boot Function) Test Case Result Comment Image Flash Pass System Boot Up Pass Touch Screen Pass Known Issues<https://github.com/projectceladon/celadon-documentation/blob/master/sourc...> * Only cover boot up function in early android 10 CIC image release * Bluetooth function is not ready on CAAS VM release * Audio 3.5 mm headphone function is not ready on CAAS VM release. * CAAS and CIC stability and performance are under tuning. To subscribe/unsubscribe: - subscribe/unsubscribe celadon mailing list using : https://eclists.intel.com/sympa/review/1a-weekly_release , also visit link : https://lists.01.org/mailman/listinfo/celadon

1 year, 7 months

1
0
0 / 0

Not able to connect to wifi network

by Sathish

Hi, I am not able to connect to my wifi network. I am seeing the below message in logcat. I can see the router has provided a DHCP message with the IP details, but I don't see the IP being assigned to wlan interface. 09-06 04:02:17.418 3582 5678 D WificondControl: Scan result ready event 09-06 04:02:17.420 3582 3603 I EthernetTracker: interfaceLinkStateChanged, iface: wlan0, up: false 09-06 04:02:17.421 3582 3679 D WificondScannerImpl: Filtering out 1 scan results. 09-06 04:02:17.429 7681 7681 D WifiSettings: onAccessPointChanged (singular) callback initiated 09-06 04:02:17.431 7681 7681 I chatty : uid=1000(system) com.android.settings identical 14 lines 09-06 04:02:17.431 7681 7681 D WifiSettings: onAccessPointChanged (singular) callback initiated 09-06 04:02:17.432 7681 7681 D WifiSettings: onAccessPointsChanged (WifiTracker) callback initiated 09-06 04:02:22.423 2677 7811 E wifi hal: Out of event poll 09-06 04:02:22.423 2677 7811 E wifi hal: Timeout on event socket 09-06 04:02:26.279 3582 4450 I WifiService: startScan uid=1000 09-06 04:02:26.285 2677 7811 E wifi hal: Out of event poll 09-06 04:02:26.285 2677 7811 D wifi hal: Data on event socket 0 09-06 04:02:26.285 2677 7811 D wifi hal: Drv Event 33 received 09-06 04:02:27.844 3582 4877 D DhcpClient: Received packet: 54:e1:ad:e0:39:e4 ACK: your new IP /192.168.0.102, netmask /255.255.255.0, gateways [/192.168.0.1] DNS servers: /192.168.0.1 /192.168.0.1 , lease time 60 09-06 04:02:28.174 3582 4877 D DhcpClient: Received packet: 0c:cb:85:ca:4d:bd ACK: your new IP /192.168.0.100, netmask /255.255.255.0, gateways [/192.168.0.1] DNS servers: /192.168.0.1 /192.168.0.1 , lease time 60 09-06 04:02:29.617 2677 7811 E wifi hal: Out of event poll 09-06 04:02:29.617 2677 7811 D wifi hal: Data on event socket 0 09-06 04:02:29.617 2677 7811 D wifi hal: Drv Event 34 received 09-06 04:02:29.617 3582 4450 D WificondControl: Scan result ready event 09-06 04:02:29.620 3582 3603 I EthernetTracker: interfaceLinkStateChanged, iface: wlan0, up: false 09-06 04:02:29.628 7681 7681 D WifiSettings: onAccessPointChanged (singular) callback initiated 09-06 04:02:29.628 7681 7681 I chatty : uid=1000(system) com.android.settings identical 14 lines 09-06 04:02:29.628 7681 7681 D WifiSettings: onAccessPointChanged (singular) callback initiated 09-06 04:02:29.628 7681 7681 D WifiSettings: onAccessPointsChanged (WifiTracker) callback initiated 09-06 04:02:34.622 2677 7811 E wifi hal: Out of event poll 09-06 04:02:34.622 2677 7811 E wifi hal: Timeout on event socket my build details are as below: [ro.build.characteristics]: [tablet] [ro.build.date]: [Wed Aug 21 13:33:22 IST 2019] [ro.build.date.utc]: [1566374602] [ro.build.description]: [celadon-eng 9 PPR2.181005.003.A1 eng.sathis.20190821.133419 test-keys] [ro.build.display.id]: [celadon-eng 9 PPR2.181005.003.A1 eng.sathis.20190821.133419 test-keys] [ro.build.fingerprint]: [celadon/celadon/celadon:9/PPR2.181005.003.A1/sathish08211333:eng/test-keys] celadon:/ # ifconfig ....... wlan0 ....... Driver iwlwifi UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 TX bytes:0 celadon:/ # Please let me know , if i am missing any configuration changes Thanks, Sathish

1 year, 7 months

4
4
0 / 0

回覆: wallpaper can't match display resolution

by MR. Children

________________________________ 寄件者: MR. Children 寄件日期: 2019年9月4日上午 08:24 收件者: celadon-info(a)01.org <celadon-info(a)01.org> 主旨: wallpaper can't match display resolution Dear all When I using custom wallpaper this wallpaper can't match display resolution steps: step1:Setting->Display->Wallpaper->Wallpapers->My photos step2:Select photos step3:Set wallpaper step4:Select Home screen System information Device: NUC7i5DNHE Manifest: ww201925_KBLNUC lunch: celadon-eng I need help thx

1 year, 7 months

4
7
0 / 0

Reminder: Project Celadon September TCM Tomorrow

by Mcdonald, Senalka

September 11, 2019 | WW37 Reminder - Join us at the Project Celadon Technical Community Meeting We are launching monthly Technical Community Meetings for Project Celadon to provide a space to discuss Celadon features and listen to community feedback. Over time, as we continue exploring community interests and involvement, we'll increase the cadence of these meetings. TCMs will typically be held the second week of each month. Some of the technical topics up for discussion span across boot, security, storage, debug, power/performance and more. We'll also be looking to you, the Celadon community, for guidance on additional topics of interest. September TCM Topic: Introduction to Celadon What is Celadon? Find out why developers and independent software vendors use Celadon and learn about supported platforms and use cases. September TCM Topic: Android Debug Bridge over USB Debug Class infrastructure for the Celadon platform USB Debug Class infrastructure (DbC) is an ideal choice for platforms that don't have USB device controller IP, yet require debugging support. During this session, developers will learn how to enable DbC in Android kernels and how to use ADB over DbC for the Celadon platform. MEETING DETAILS Asia Pacific Sept 12, Thursday 10:30am (India) Sept 12, Thursday 1pm (China) North America Sept 11, Wednesday 10pm (PST) Meeting Link https://intel.webex.com/meet/sahluwal (Recommended to use Chrome instead of Internet Explorer when joining meeting using a browser) * Chairperson: Yogesh Marathe, yogesh.marathe(a)intel.com, Intel * Presenter: Prabhat Pandey, prabhat.chand.pandey(a)intel.com, Intel * Online conference link: https://intel.webex.com/meet/sahluwal * Access code: 598 858 630 Online conference phone: * US: +1-210-795-1110 or +1-866-662-9987 (Toll Free) * China: +86-400-810-0111 or +86-10-800-712-2435 (Toll Free) * Germany: +49-69-2222-7804 or +49-0800-000-3331 (Toll Free) * India: +91-80-61275208 or +91-000-800-852-1234 (Toll Free) Privacy Notice - http://www.intel.com/privacy Cookies - https://www.intel.com/content/www/us/en/privacy/intel-cookie-notice.html Terms of Use - https://www.intel.com/content/www/us/en/legal/terms-of-use.html Unsubscribe - https://lists.01.org/mailman/listinfo/celadon Manage Preferences - https://lists.01.org/mailman/listinfo/celadon

1 year, 8 months

1
0
0 / 0

Reminder: Project Celadon September TCM Tomorrow

by Mcdonald, Senalka

September 11, 2019 | WW37 Reminder - Join us at the Project Celadon Technical Community Meeting We are launching monthly Technical Community Meetings for Project Celadon to provide a space to discuss Celadon features and listen to community feedback. Over time, as we continue exploring community interests and involvement, we'll increase the cadence of these meetings. TCMs will typically be held the second week of each month. Some of the technical topics up for discussion span across boot, security, storage, debug, power/performance and more. We'll also be looking to you, the Celadon community, for guidance on additional topics of interest. September TCM Topic: Introduction to Celadon What is Celadon? Find out why developers and independent software vendors use Celadon and learn about supported platforms and use cases. September TCM Topic: Android Debug Bridge over USB Debug Class infrastructure for the Celadon platform USB Debug Class infrastructure (DbC) is an ideal choice for platforms that don't have USB device controller IP, yet require debugging support. During this session, developers will learn how to enable DbC in Android kernels and how to use ADB over DbC for the Celadon platform. MEETING DETAILS Asia Pacific Sept 12, Thursday 10:30am (India) Sept 12, Thursday 1pm (China) North America Sept 11, Wednesday 10pm (PST) Meeting Link https://intel.webex.com/meet/sahluwal (Recommended to use Chrome instead of Internet Explorer if joining meeting using a browser) * Chairperson: Yogesh Marathe, yogesh.marathe(a)intel.com, Intel * Presenter: Prabhat Pandey, prabhat.chand.pandey(a)intel.com, Intel * Online conference link: https://intel.webex.com/meet/sahluwal * Access code: 598 858 630 Online conference phone: * US: +1-210-795-1110 or +1-866-662-9987 (Toll Free) * China: +86-400-810-0111 or +86-10-800-712-2435 (Toll Free) * Germany: +49-69-2222-7804 or +49-0800-000-3331 (Toll Free) * India: +91-80-61275208 or +91-000-800-852-1234 (Toll Free) Privacy Notice - http://www.intel.com/privacy Cookies - https://www.intel.com/content/www/us/en/privacy/intel-cookie-notice.html Terms of Use - https://www.intel.com/content/www/us/en/legal/terms-of-use.html Unsubscribe - https://lists.01.org/mailman/listinfo/celadon Manage Preferences - https://lists.01.org/mailman/listinfo/celadon

1 year, 8 months

1
0
0 / 0

stable master build manifests?

by Takashi Matsuzawa

Hello. I could build Celadon with master branch configuration a couple of months ago, but today if I tried rebuilding, it failed. (Due to patch conflict errors, etc.) I did the following to download source. $ repo init -u https://github.com/projectceladon/manifest.git (meaning, default.xml of master branch is used.) >From its nature master branch may not be stable enough everyday. I can see several stable branch configuratsion xmls and I want to try them (so that I can rebuild without errors). https://github.com/projectceladon/manifest/tree/master/stable-build What exact repo init syntax to use one of these (e.g. ww201925_H.xml) manifest file? I think repo init has -b and -m options to specify branch and manifest file name, but -m will work if I specify sub directory? And, what are "stable-build" manifests relashonships with the Celadon project releases? (I would like to pick latest stable master build version for my daily works.)

1 year, 8 months

2
2
0 / 0

2021

2020

2019

2018

Celadon September 2019