Dear all:

  Currently for GRUB installation, the upgrade installation and OTA update are not supported and verified.

  And user can back up the data and reinstall a new one if want to upgrade.

 

  If use GRUB load kernelflinger, and kernelflinger load Android, then the OTA update maybe supported except upgrade the GRUB and kernelflinger. But I have not verified, you can try it if you have interesting J

  In general, we recommend to use kernelflinger directly. Compare with pure kernelflinger, use GRUB + Kernelflinger still need disable some features.

 

  BR/Tan Ming.

 

From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Wade Wilson
Sent: Monday, April 29, 2019 10:12 PM
To: celadon@lists.01.org
Subject: Re: [01.org Celadon] GRUB Boot Failing To Launch Installer

 

I think it's fine for GRUB to load KernelFlinger with Treble. Frankly I wouldn't want GRUB booting the OS directly since you can't load a recovery stack without KernelFlinger.

 

The one topic I'd want clarified is how will GRUB (when it works) handle an Android image upgrade fed offline.

 

Will the post-Treble installer keep user data, and write the new Treble system image over when the installer flash drive is plugged in? If so, that should work for everyone.

 

That way you can develop apps and maintain user data on the device, and update nightly by simply overwriting the system image via the flash boot drive. (That's how it worked throughout Android-IA's lifecycle, anyway - it would detect the existing system image and only write the updated system.img).

 

Thanks!

 

On Mon, 29 Apr 2019 at 02:08, Tan, Ming <ming.tan@intel.com> wrote:

Dear all:

  I will have a check of why the GRUB does not work.

  But now GRUB will load kernelflinger, and kernelflinger load Android.

  After enable the Treble, GRUB load Android directly is not supported now.

 

  BR/Tan Ming.

 

From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Wade Wilson
Sent: Monday, April 29, 2019 4:11 PM
To: celadon@lists.01.org
Subject: Re: [01.org Celadon] GRUB Boot Failing To Launch Installer

 

I agree the wiki should have a note, but it should be equally for internal and external consumption. Something to the effect of “we're aware GRUB is not working properly, we understand the community needs a straightforward installer - and this will be fixed in due course.”

 

The whole point of GRUB + KernelFlinger was to replace IAGO as an easier solution since GRUB “just works” - so we need to rally folks to bump it back up in priority. 

 

The other problem is that it’s also broken on OMR1 (tried that too), so you can’t just fall back to Oreo either.

 

The big issue with KernelFlinger on its own, for those scratching their heads, is if you don’t have the USB host lead tool. At least with Fuchsia you can go over the network and flash. If you don’t have that lead, you can’t flash, which means you can’t bring up/boot the hardware… such as on my Kaby Lake Yoga.

 

My other fear is that the verified boot disable flow will break down, so if GRUB isn’t brought back up, it could create downtime issues later to not nip this in the bud and have it just work now. In other words, it could be a lot easier to do now to fix, than to fix later.

 

On Mon, 29 Apr 2019 at 00:41, Tapani Pälli <tapani.palli@intel.com> wrote:



On 4/29/19 9:22 AM, Wade Wilson wrote:
> Thanks for confirming. To be clear, I don't support removing the
> instructions from the Wiki. In my watching Android-IA / Celadon over the
> years, stuff that gets removed, people jump to the conclusion there is
> no interest or need.

I understand the concern, my rationale is that all instructions what we
have there should work. If it doesn't then alternatively take it out or
at least include a clear warning that it does not work. Otherwise the
first impression will be very bad.


> For anyone in the community bringing up hardware, this is a rather
> critical need. Android is not Fuchsia, and nobody in the community is
> going to work on it without a traditional bootloader.
>
> I think this should get flagged as a critical bug and the bootloader
> team should fix it, ASAP with priority. GRUB should always just work.

I agree it should be fixed. Unfortunately I believe there are many other
on-going things prioritized above this so kernelflinger is considered
the "default".


> On Sun, 28 Apr 2019 at 21:42, Tapani Pälli <tapani.palli@intel.com
> <mailto:tapani.palli@intel.com>> wrote:
>
>     Hi;
>
>     On 4/28/19 9:47 AM, Wade Wilson wrote:
>      > Hi everyone,
>      >
>      > I am trying to get Android P up and running. I have both a Kaby Lake
>      > NUC7 and a Lenovo Yoga with Kaby Lake and stock Intel everything.
>      >
>      > I can build Celadon just fine, but when I boot the flash drive and
>      > launch GRUB, I choose the first menu item to Install with
>     KernelFlinger...
>      >
>      > ... and then hang at a blank line. Just a lone underscore and the
>     whole
>      > system hangs. No prompt to select a target drive or even some
>     crash data.
>      >
>      > I've tried both "celadon" and "cel_kbl" build targets with
>     SPARSE_IMG
>      > and project_celadon-efi ticked on during building.
>      >
>      > My NUC is running BIOS 0076 (latest) and I'm not quite sure what
>     to do
>      > here. Is GRUB broken currently? Any suggestions? Thanks!
>
>     Unfortunately GRUB has been broken for a long time and IMO the
>     instructions to build it should be removed from the wiki until it works
>     again. I've tried to contact some folks to remove them but it's been
>     unsuccessful :/
>
>     Thanks;
>
>     // Tapani
>
>