Hi Ereryone

Correct my build cmd
$ make SPARSE_IMG=true -j32 flashfiles  


不含病毒。www.avast.com

hpo14 <hpo14.always@gmail.com> 於 2019年5月30日 週四 上午1:14寫道:
Hi Everyone

I downloaded celadon codebase with manifest 2019ww13.xml.
Using celadon-eng as my target and make kernelflinger build (*1).
Then flashed to my device UPCore Plus (*2).

Below table is the boot result of my UP Core Plus and compare board

----------------------------------------------------------------------------------------------
Image Version    | Kernel Ver | Android Ver | UP Core Plus          | RTC-1010
----------------------------------------------------------------------------------------------
Celadon 2018ww32 | 4.14.59    | Android 8.1 | Boot to home          | Boot to home
Celadon 2018ww52 | 4.19.x     | Android 9   | stuck on android logo | Boot to home
Celadon 2019ww13 | 4.19.19    | Android 9   | stuck on android logo | Boot to home
----------------------------------------------------------------------------------------------

I have check the log, found something.

1. /data/media partition seems not mount on UP Core Plus

    -- UP Core Plus ------------------------------
    console: # df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/root             3.3G  1.3G  2.0G  39% /
    tmpfs                 895M  456K  895M   1% /dev
    tmpfs                 895M     0  895M   0% /mnt
    /dev/block/dm-1       1.7G  726M  0.9G  42% /vendor
    /dev/block/mmcblk0p12 3.7M   32K  3.7M   1% /vendor/oem_config
    /dev/block/mmcblk0p13 5.6M   32K  5.6M   1% /vendor/factory
    /dev/block/mmcblk0p19  18G   80M   18G   1% /data


    -- RTC-1010 ------------------------------
    console:/ # df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/root             3.3G  1.3G  2.0G  39% /
    tmpfs                 1.8G  448K  1.8G   1% /dev
    tmpfs                 1.8G     0  1.8G   0% /mnt
    /dev/block/dm-1       1.7G  726M  0.9G  42% /vendor
    /dev/block/mmcblk0p12 3.7M   32K  3.7M   1% /vendor/oem_config
    /dev/block/mmcblk0p13 5.6M   32K  5.6M   1% /vendor/factory
    /dev/block/mmcblk0p19  46G  141M   46G   1% /data
    /data/media            46G  141M   46G   1% /mnt/runtime/default/emulated


2. lots of log about
    write xxx to /dev/cpuset/camera-daemon/tasks: No such file or directory
    write xxx to /dev/cpuset/foreground/tasks: No such file or directory

3. zygote does not start successfully, always killed with unknown reason.

4. Below log frequenlty shows and never stop on both UP Core Plus and RTC-1010 logs.
    init: cannot setexeccon('u:r:hdcpd:s0') for hdcpd: Invalid argumen
   
   Should this happened ?
   I can't find any sepolicy te or file_contexts related to "hdcpd"


Attached logs: (dmesg, df, logcat of "EXT|fsck|vold" )
https://pastebin.com/8mjtnLx4 -- 2019ww13_up_core_plus_stuck_on_android_logo
https://pastebin.com/yeDTDkr9 -- 2019ww13_rtc1010_boot_to_home

If need more information, please let me know.

-------------------------

**1: build cmd
$ . build/env.sh
$ lunch celadon-eng
$ make -j32 flashfiles


**2: flash steps
1. extract celadon-flashfiles-eng.hpo14.zip to usb flash drive
2. boot to EFI shell
3. run startup.nsh to flash


**3 Device Hardward information

UP Core Plus
 - Apollo Lake
 - Atom x5-E3930 / Sandisk 32G eMMC (SDINBDA4-32G) / 2G RAM
 - BIOS Ver of UPCore Plus: UPCPSM10
 - link:
    https://up-shop.org/945-thickbox_default/up-core-plus.jpg

RTC-1010
 - Apollo Lake
 - Pentium N4200 / Sandisk 64G eMMC (SDINBDA4-64G) / 4G RAM
 - link:
    https://www.aaeon.com/en/p/10-inches-rugged-tablet-computers-rtc-1010


--
Sincerely
hpo14

不含病毒。www.avast.com


--
Sincerely
hpo14