Use USB cable connecting the NUC to a linux/windows host, then run adb shell on the
host.
Due to a special reason, Android software can’t disable XDCI. If the software doesn’t load
XDCI driver dwc3,
the usb port still works at device mode.
I have no NUC7i7BNH in hand. Can you boot NUC to BIOS menu and check if you can disable
XDCI? If BIOS
Menu has no the option, can you update BIOS to the latest version?
From: Gaurav Gupta [mailto:gaurav@trainingdata.io]
Sent: Wednesday, July 03, 2019 6:45 AM
To: Zhang, Yanmin <yanmin.zhang(a)intel.com>
Cc: Sathish <satish.chevuru(a)gmail.com>; Tan, Ming <ming.tan(a)intel.com>;
celadon(a)lists.01.org
Subject: Re: [
01.org Celadon] Unresponsive USB port on NUC7i7BNH - Celadon
Perhaps the port is forced to USB Device Mode. Can you use ‘adb shell’ to connect to
Android form that port?
how to connect to 'adb shell' using USB port? USB-USB cable?
I though adb connect was only enabled over network for NUC, am I right?
Can adb be connected over USB for NUC?
Check BIOS menu to disable USB XDCI, then check if that port can be used as Host Mode.
Is it possible to disable XDCI and force Host-Mode in Android OS or BSP?
From: Celadon
[mailto:celadon-bounces@lists.01.org<mailto:celadon-bounces@lists.01.org>] On Behalf
Of Sathish
Sent: Tuesday, July 02, 2019 1:31 PM
To: Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>>
Cc: Gaurav Gupta <gaurav@trainingdata.io<mailto:gaurav@trainingdata.io>>;
celadon@lists.01.org<mailto:celadon@lists.01.org>
Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH -
Celadon
Hi,
BIOS Version is : BNKBL357.86A.0047.2017.0518.1824
I used the same port to plugin the USB Storage Disk to Install the Celadon OS and
installation is successful.
But once the OS boots up and I connect camera or mouse , to it , It won't work.
Thanks,
Sathish
On Tue, Jul 2, 2019 at 10:49 AM Tan, Ming
<ming.tan@intel.com<mailto:ming.tan@intel.com>> wrote:
Sathish:
What is your BIOS version?
If you enter the BIOS setup program, does the key board or mouse do work if connect to
this port?
BR/Tan Ming.
From: Sathish [mailto:satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>]
Sent: Tuesday, July 2, 2019 1:13 PM
To: Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>>
Cc: Gaurav Gupta <gaurav@trainingdata.io<mailto:gaurav@trainingdata.io>>;
celadon@lists.01.org<mailto:celadon@lists.01.org>
Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH -
Celadon
Out of four , three works fine , including back one , I am seeing the issue on front right
side port .
Thanks,
Sathish
On Tue, 2 Jul, 2019, 10:39 AM Tan, Ming,
<ming.tan@intel.com<mailto:ming.tan@intel.com>> wrote:
Sathish:
How about the USB ports in the back side?
BR/Tan Ming.
From: Celadon
[mailto:celadon-bounces@lists.01.org<mailto:celadon-bounces@lists.01.org>] On Behalf
Of Gaurav Gupta
Sent: Tuesday, July 2, 2019 1:03 PM
To: Sathish <satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>>
Cc: celadon@lists.01.org<mailto:celadon@lists.01.org>
Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH -
Celadon
Hi All,
Has anyone observed USB ports not functioning on officially supported hardware?
Intel® NUC Kit
NUC7i5DNHE<https://www.intel.com/content/www/us/en/products/boards-kit...
Intel® NUC Kit
NUC6CAYH<https://www.intel.com/content/www/us/en/products/boards-kits/...
On Mon, Jul 1, 2019 at 9:48 PM Sathish
<satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>> wrote:
Hi,
I installed celadon-eng build on NUC7i7BNH. I am using this for a video conferencing
application.
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=9
TARGET_PRODUCT=celadon
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_ARCH=x86_64
TARGET_ARCH_VARIANT=x86_64
The front USB is non responsive for either Mouse, Keyboard, Camera or to Jabra Speaker.
I am seeing this on the latest build , this was fine with omr1 version.
I am seeing the same issue on cel_apl build as well.
[ro.vendor.build.fingerprint]:
[cel_apl/cel_apl/cel_apl:9/PPR2.181005.003.A1/sathish06162135:eng/test-keys]
I am wondering , whether any of you have seen this issue during your installs. Do i need
to use celadon certified NUC hardware ?
Appreciate your inputs.
Thanks,
Sathish
--
Celadon mailing list
Celadon@lists.01.org<mailto:Celadon@lists.01.org>
https://lists.01.org/mailman/listinfo/celadon
--
Gaurav,
Co-founder, TrainingData.io
+1-917-386-3396
228 Webster Street,
Palo Alto,
CA, 94301
--
Celadon mailing list
Celadon@lists.01.org<mailto:Celadon@lists.01.org>
https://lists.01.org/mailman/listinfo/celadon
--
Gaurav,
Co-founder, TrainingData.io
+1-917-386-3396
228 Webster Street,
Palo Alto,
CA, 94301