Hi Saranya,
Could you please provide me the same patch for the celadon eng target.
Thanks,
Sathish
On Fri, Jul 5, 2019 at 9:34 AM Sathish <satish.chevuru(a)gmail.com> wrote:
Hi,
I tested the alternative and mouse is detected in the front port.
Will use patches to build the OS.
Thank you.
Thanks,
Sathish
On Thu, Jul 4, 2019 at 3:56 PM Gopal, Saranya <saranya.gopal(a)intel.com>
wrote:
> Sorry.. corrected the typo below. It is ‘host’ to switch to host mode.
>
> #echo host > /sys/class/usb_role/intel_xhci_usb_sw-role-switch/role
>
>
>
> *From:* Celadon [mailto:celadon-bounces@lists.01.org] *On Behalf Of *Gopal,
> Saranya
> *Sent:* Thursday, July 04, 2019 3:54 PM
> *To:* Gaurav Gupta <gaurav(a)trainingdata.io>; Zhang, Yanmin <
> yanmin.zhang(a)intel.com>
> *Cc:* celadon(a)lists.01.org; Prasad, RevatiX <revatix.prasad(a)intel.com>
> *Subject:* Re: [
01.org Celadon] Unresponsive USB port on NUC7i7BNH -
> Celadon
>
>
>
> Hi Gaurav,
>
>
>
> In Celadon platform, the front port is designed to work as device mode
> port.
>
> For your case, you can apply the above two patches and build cel_kbl
> target to force host mode on your NUC (NUC7i7BNH).
>
> Make sure that your build workspace is new. Otherwise, the applied
> google_diff patches may conflict with the current patches.
>
> With the build with these two patches, the port is forced into host mode
> always.
>
>
>
> Alternatively, in your existing build, you can still switch the port role
> to host through this command in adb shell:
>
> #echo host > /sys/class/usb_role/intel_xhci_usb_sw-role-switch/role
>
>
>
> Thanks,
>
> Saranya
>
>
>
> *From:* Celadon [mailto:celadon-bounces@lists.01.org
> <celadon-bounces(a)lists.01.org>] *On Behalf Of *Gaurav Gupta
> *Sent:* Wednesday, July 03, 2019 4:15 AM
> *To:* Zhang, Yanmin <yanmin.zhang(a)intel.com>
> *Cc:* celadon(a)lists.01.org
> *Subject:* Re: [
01.org Celadon] Unresponsive USB port on NUC7i7BNH -
> Celadon
>
>
>
> Perhaps the port is forced to USB Device Mode. Can you use ‘adb shell’ to
> connect to Android form that port?
>
> how to connect to 'adb shell' using USB port? USB-USB cable?
>
> I though adb connect was only enabled over network for NUC, am I right?
>
> Can adb be connected over USB for NUC?
>
> Check BIOS menu to disable USB XDCI, then check if that port can be used
> as Host Mode.
>
> Is it possible to disable XDCI and force Host-Mode in Android OS or BSP?
>
>
>
>
>
> *From:* Celadon [mailto:celadon-bounces@lists.01.org] *On Behalf Of *
> Sathish
> *Sent:* Tuesday, July 02, 2019 1:31 PM
> *To:* Tan, Ming <ming.tan(a)intel.com>
> *Cc:* Gaurav Gupta <gaurav(a)trainingdata.io>; celadon(a)lists.01.org
> *Subject:* Re: [
01.org Celadon] Unresponsive USB port on NUC7i7BNH -
> Celadon
>
>
>
> Hi,
>
>
>
> BIOS Version is : BNKBL357.86A.0047.2017.0518.1824
>
>
>
> I used the same port to plugin the USB Storage Disk to Install the
> Celadon OS and installation is successful.
>
> But once the OS boots up and I connect camera or mouse , to it , It won't
> work.
>
>
>
> Thanks,
>
> Sathish
>
>
>
> On Tue, Jul 2, 2019 at 10:49 AM Tan, Ming <ming.tan(a)intel.com> wrote:
>
> Sathish:
>
> What is your BIOS version?
>
> If you enter the BIOS setup program, does the key board or mouse do
> work if connect to this port?
>
>
>
> BR/Tan Ming.
>
>
>
> *From:* Sathish [mailto:satish.chevuru@gmail.com]
> *Sent:* Tuesday, July 2, 2019 1:13 PM
> *To:* Tan, Ming <ming.tan(a)intel.com>
> *Cc:* Gaurav Gupta <gaurav(a)trainingdata.io>; celadon(a)lists.01.org
> *Subject:* Re: [
01.org Celadon] Unresponsive USB port on NUC7i7BNH -
> Celadon
>
>
>
> Out of four , three works fine , including back one , I am seeing the
> issue on front right side port .
>
>
>
> Thanks,
>
> Sathish
>
>
>
> On Tue, 2 Jul, 2019, 10:39 AM Tan, Ming, <ming.tan(a)intel.com> wrote:
>
> Sathish:
>
> How about the USB ports in the back side?
>
>
>
> BR/Tan Ming.
>
>
>
> *From:* Celadon [mailto:celadon-bounces@lists.01.org] *On Behalf Of *Gaurav
> Gupta
> *Sent:* Tuesday, July 2, 2019 1:03 PM
> *To:* Sathish <satish.chevuru(a)gmail.com>
> *Cc:* celadon(a)lists.01.org
> *Subject:* Re: [
01.org Celadon] Unresponsive USB port on NUC7i7BNH -
> Celadon
>
>
>
> Hi All,
>
> Has anyone observed USB ports not functioning on officially supported
> hardware?
>
> Intel® NUC Kit NUC7i5DNHE
>
<
https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc...
> Intel® NUC Kit NUC6CAYH
>
<
https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc...
>
>
>
> On Mon, Jul 1, 2019 at 9:48 PM Sathish <satish.chevuru(a)gmail.com> wrote:
>
> Hi,
>
>
>
> I installed celadon-eng build on NUC7i7BNH. I am using this for a video
> conferencing application.
>
>
>
> PLATFORM_VERSION_CODENAME=REL
> PLATFORM_VERSION=9
> TARGET_PRODUCT=celadon
> TARGET_BUILD_VARIANT=eng
> TARGET_BUILD_TYPE=release
> TARGET_ARCH=x86_64
> TARGET_ARCH_VARIANT=x86_64
>
>
>
> The front USB is non responsive for either Mouse, Keyboard, Camera or to
> Jabra Speaker.
>
>
>
> I am seeing this on the latest build , this was fine with omr1 version.
>
>
>
> I am seeing the same issue on cel_apl build as well.
>
>
>
> [ro.vendor.build.fingerprint]:
> [cel_apl/cel_apl/cel_apl:9/PPR2.181005.003.A1/sathish06162135:eng/test-keys]
>
>
>
> I am wondering , whether any of you have seen this issue during your
> installs. Do i need to use celadon certified NUC hardware ?
>
>
>
> Appreciate your inputs.
>
>
>
> Thanks,
>
> Sathish
>
> --
> Celadon mailing list
> Celadon(a)lists.01.org
>
https://lists.01.org/mailman/listinfo/celadon
>
>
>
>
> --
>
> Gaurav,
>
> Co-founder, TrainingData.io
>
> +1-917-386-3396
>
> 228 Webster Street,
> Palo Alto,
>
> CA, 94301
>
>
>
> --
> Celadon mailing list
> Celadon(a)lists.01.org
>
https://lists.01.org/mailman/listinfo/celadon
>
>
>
>
> --
>
> Gaurav,
>
> Co-founder, TrainingData.io
>
> +1-917-386-3396
>
> 228 Webster Street,
> Palo Alto,
>
> CA, 94301
>
>
> --
> Celadon mailing list
> Celadon(a)lists.01.org
>
https://lists.01.org/mailman/listinfo/celadon
>