Re: [01.org Celadon] Is live mode still supported? - Celadon - Ml01.01.Org

2021

January

2020

2019

2018

Re: [01.org Celadon] Is live mode still supported?

flashing process

Build fails on missing...

Soham Sinha

Friday, 8 March 2019 Fri, 8 Mar '19

12:25 a.m.

Hello, Is there any way to live boot with KernelFlinger? I cannot load Android installation or live-boot with GRUB. Regards, Soham Sinha PhD Student, Department of Computer Science Boston University

Attachments:

attachment.html (text/html — 475 bytes)

Reply

Show replies by date

Tan, Ming

Friday, 8 March Fri, 8 Mar

2:45 a.m.

New subject: Is live mode still supported?

Dear all: There is a live boot with kernelflinger directly. But there is some bugs about it, and we are try to fix it. You can try the following steps: 1. Build the image support live boot use the following make commands: make SPARSE_IMG=true KERNELFLINGER_SUPPORT_USB_STORAGE=true gptimage -j 70 2. Flash the built cel_kbl-gptimage.img to a USB disk. 3. Boot from this USB disk directly. BR/Tan Ming. From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Soham Sinha Sent: Friday, March 8, 2019 7:25 AM To: celadon(a)lists.01.org Cc: Zhuang, Qihua <qihua.zhuang(a)intel.com> Subject: Re: [01.org Celadon] Is live mode still supported? Hello, Is there any way to live boot with KernelFlinger? I cannot load Android installation or live-boot with GRUB. Regards, Soham Sinha PhD Student, Department of Computer Science Boston University

Reply

Tan, Ming

4:29 a.m.

New subject: Is live mode still supported?

Dear all: I just build a USB live boot image, and flash it to a USB disk and successfully boot to UI. But notice: Only one Android can be installed in one device. 1. If the device already has another Android, then USB live boot will failed, I disable the storage used by another Android to hide it, then the USB disk can boot to UI. BR/Tan Ming. From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Tan, Ming Sent: Friday, March 8, 2019 9:46 AM To: Soham Sinha <soham1(a)bu.edu>; celadon(a)lists.01.org Cc: Zhuang, Qihua <qihua.zhuang(a)intel.com> Subject: Re: [01.org Celadon] Is live mode still supported? Dear all: There is a live boot with kernelflinger directly. But there is some bugs about it, and we are try to fix it. You can try the following steps: 1. Build the image support live boot use the following make commands: make SPARSE_IMG=true KERNELFLINGER_SUPPORT_USB_STORAGE=true gptimage -j 70 2. Flash the built cel_kbl-gptimage.img to a USB disk. 3. Boot from this USB disk directly. BR/Tan Ming. From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Soham Sinha Sent: Friday, March 8, 2019 7:25 AM To: celadon@lists.01.org<mailto:celadon@lists.01.org> Cc: Zhuang, Qihua <qihua.zhuang@intel.com<mailto:qihua.zhuang@intel.com>> Subject: Re: [01.org Celadon] Is live mode still supported? Hello, Is there any way to live boot with KernelFlinger? I cannot load Android installation or live-boot with GRUB. Regards, Soham Sinha PhD Student, Department of Computer Science Boston University

Reply

Soham Sinha

3:02 p.m.

New subject: Is live mode still supported?

Hello Tan, The celadon_gptimage.img file is pretty large - 14G. Is this expected? Regards, Soham Sinha PhD Student, Department of Computer Science Boston University On Thu, Mar 7, 2019 at 10:29 PM Tan, Ming <ming.tan(a)intel.com> wrote:

Dear all: I just build a USB live boot image, and flash it to a USB disk and successfully boot to UI. But notice: Only one Android can be installed in one device. 1. If the device already has another Android, then USB live boot will failed, I disable the storage used by another Android to hide it, then the USB disk can boot to UI. BR/Tan Ming. *From:* Celadon [mailto:celadon-bounces@lists.01.org] *On Behalf Of *Tan, Ming *Sent:* Friday, March 8, 2019 9:46 AM *To:* Soham Sinha <soham1(a)bu.edu>; celadon(a)lists.01.org *Cc:* Zhuang, Qihua <qihua.zhuang(a)intel.com> *Subject:* Re: [01.org Celadon] Is live mode still supported? Dear all: There is a live boot with kernelflinger directly. But there is some bugs about it, and we are try to fix it. You can try the following steps: 1. Build the image support live boot use the following make commands: make SPARSE_IMG=true KERNELFLINGER_SUPPORT_USB_STORAGE=true gptimage -j 70 2. Flash the built cel_kbl-gptimage.img to a USB disk. 3. Boot from this USB disk directly. BR/Tan Ming. *From:* Celadon [mailto:celadon-bounces@lists.01.org <celadon-bounces(a)lists.01.org>] *On Behalf Of *Soham Sinha *Sent:* Friday, March 8, 2019 7:25 AM *To:* celadon(a)lists.01.org *Cc:* Zhuang, Qihua <qihua.zhuang(a)intel.com> *Subject:* Re: [01.org Celadon] Is live mode still supported? Hello, Is there any way to live boot with KernelFlinger? I cannot load Android installation or live-boot with GRUB. Regards, Soham Sinha PhD Student, Department of Computer Science Boston University

Reply

Soham Sinha

Saturday, 9 March Sat, 9 Mar

10:16 p.m.

New subject: Is live mode still supported?

Hello, I checked, and it worked on an Up2 board. However, the live version is very slow and the SystemUI app stops frequently. Sometime it goes back to the Android logo screen. Regards, Soham Sinha PhD Student, Department of Computer Science Boston University On Fri, Mar 8, 2019 at 9:02 AM Soham Sinha <soham1(a)bu.edu> wrote:

Hello Tan, The celadon_gptimage.img file is pretty large - 14G. Is this expected? Regards, Soham Sinha PhD Student, Department of Computer Science Boston University On Thu, Mar 7, 2019 at 10:29 PM Tan, Ming <ming.tan(a)intel.com> wrote: > Dear all: > > I just build a USB live boot image, and flash it to a USB disk and > successfully boot to UI. > > But notice: Only one Android can be installed in one device. > > 1. If the device already has another Android, then USB live boot will > failed, I disable the storage used by another Android to hide it, then the > USB disk can boot to UI. > > > > BR/Tan Ming. > > > > *From:* Celadon [mailto:celadon-bounces@lists.01.org] *On Behalf Of *Tan, > Ming > *Sent:* Friday, March 8, 2019 9:46 AM > *To:* Soham Sinha <soham1(a)bu.edu>; celadon(a)lists.01.org > *Cc:* Zhuang, Qihua <qihua.zhuang(a)intel.com> > *Subject:* Re: [01.org Celadon] Is live mode still supported? > > > > Dear all: > > There is a live boot with kernelflinger directly. But there is some > bugs about it, and we are try to fix it. > > You can try the following steps: > > 1. Build the image support live boot use the following make commands: > > make SPARSE_IMG=true KERNELFLINGER_SUPPORT_USB_STORAGE=true > gptimage -j 70 > > 2. Flash the built cel_kbl-gptimage.img to a USB disk. > > 3. Boot from this USB disk directly. > > > > BR/Tan Ming. > > > > *From:* Celadon [mailto:celadon-bounces@lists.01.org > <celadon-bounces(a)lists.01.org>] *On Behalf Of *Soham Sinha > *Sent:* Friday, March 8, 2019 7:25 AM > *To:* celadon(a)lists.01.org > *Cc:* Zhuang, Qihua <qihua.zhuang(a)intel.com> > *Subject:* Re: [01.org Celadon] Is live mode still supported? > > > > Hello, > > > > Is there any way to live boot with KernelFlinger? I cannot load Android > installation or live-boot with GRUB. > > > Regards, > > Soham Sinha > > PhD Student, Department of Computer Science > > Boston University >

Reply

Tan, Ming

Sunday, 10 March Sun, 10 Mar

9:03 a.m.

New subject: Is live mode still supported?

Sinha: Yes, the image is 14G. In fact, it is a disk image. This image contain the whole Android system include the data partition. Flash this image to a USB disk, just like use the USB disk as the Android main storage. You can save some data to this USB disk. BR/Tan Ming. From: Soham Sinha [mailto:soham1@bu.edu] Sent: Friday, March 8, 2019 10:02 PM To: Tan, Ming <ming.tan(a)intel.com> Cc: celadon(a)lists.01.org Subject: Re: [01.org Celadon] Is live mode still supported? Hello Tan, The celadon_gptimage.img file is pretty large - 14G. Is this expected? Regards, Soham Sinha PhD Student, Department of Computer Science Boston University On Thu, Mar 7, 2019 at 10:29 PM Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>> wrote: Dear all: I just build a USB live boot image, and flash it to a USB disk and successfully boot to UI. But notice: Only one Android can be installed in one device. 1. If the device already has another Android, then USB live boot will failed, I disable the storage used by another Android to hide it, then the USB disk can boot to UI. BR/Tan Ming. From: Celadon [mailto:celadon-bounces@lists.01.org<mailto:celadon-bounces@lists.01.org>] On Behalf Of Tan, Ming Sent: Friday, March 8, 2019 9:46 AM To: Soham Sinha <soham1@bu.edu<mailto:soham1@bu.edu>>; celadon@lists.01.org<mailto:celadon@lists.01.org> Cc: Zhuang, Qihua <qihua.zhuang@intel.com<mailto:qihua.zhuang@intel.com>> Subject: Re: [01.org<http://01.org> Celadon] Is live mode still supported? Dear all: There is a live boot with kernelflinger directly. But there is some bugs about it, and we are try to fix it. You can try the following steps: 1. Build the image support live boot use the following make commands: make SPARSE_IMG=true KERNELFLINGER_SUPPORT_USB_STORAGE=true gptimage -j 70 2. Flash the built cel_kbl-gptimage.img to a USB disk. 3. Boot from this USB disk directly. BR/Tan Ming. From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Soham Sinha Sent: Friday, March 8, 2019 7:25 AM To: celadon@lists.01.org<mailto:celadon@lists.01.org> Cc: Zhuang, Qihua <qihua.zhuang@intel.com<mailto:qihua.zhuang@intel.com>> Subject: Re: [01.org<http://01.org> Celadon] Is live mode still supported? Hello, Is there any way to live boot with KernelFlinger? I cannot load Android installation or live-boot with GRUB. Regards, Soham Sinha PhD Student, Department of Computer Science Boston University

Reply

688

days inactive

691

days old

celadon@lists.01.org

Manage subscription

5 comments

2 participants

tags (0)

participants (2)

Soham Sinha
Tan, Ming