[cid:image001.png@01D726E1.F05CCE30] Android RMR0 CELADON CIV_00.21.01.12_A11 [cid:image002.png@01D726E1.F05CCE30] April 1st 2021 - The Android SI team announces [TGL-NUC] [CIV RMR0] [Binary Release] This Release supports the Platform: TGL NUC: * Manifest : https://github.com/projectceladon/manifest/blob/master/stable-build/CIV_0... * Binary : https://github.com/projectceladon/celadon-binary/tree/master/CIV_00.21.01... * Release Notes : https://github.com/projectceladon/celadon-documentation/blob/master/sourc... * Documentation : https://01.org/projectceladon/documentation CIV_00.21.01.12_A11<https://github.com/projectceladon/celadon-document... * This is a Pre-Production Release for evaluation and development purposes and it cannot be used for production purposes. This release is supported on TGL NUC Celadon in VM. New Features * ADB over DbC support * Widevine Ready for TGL NUC * WFA Security- Enhanced Open (OWE) support Existing Features * API Level 30 & FCM target Level 5 * Other Changes that came as part of API level Up * AIDL for Power and Light HALs * Audio & Audio effects HAL 6.0 * Health HAL 2.1 * Boot HAL upgraded to 1.1 * Upgraded Mainline modules * Soft restart * Updatable APEX * Config store HAL deprecated * Graphics Memory Allocator (Gralloc) 4.0 * HWC 2.4 support for Display * Trusty Hardware Seed binding * Power Management - Suspend,Resume * Android key Input Manager Framework is implemented for Power & Volume buttons * Integrated Sensor Hub Enablement for Android Supported Sensors * Android Thermal HAL and Thermal Manager Service * BZIP2 performance improvements * Bluetooth Control from Android in VM * HDMI Audio Output Support * Virtio-gpu Support * SDHCI mediation enabled and supported SD card * CIV launch script for SD Card: sudo -E ./scripts/start_android_qcow2.sh --sdonly * Graphics GVT-d support * HDMI and DP display support * Mass Storage USB 2.0 and 3.x devices is supported * Adb over WIFI and Ethernet is supported * Audio playback over USB Headset, 3.5mm and HDMI are supported * Setting Proxy for Wireless Network * Wi-Fi 802.11 a/b/g/n/ac/ax and Bluetooth 4.2 * Ethernet works fine with Ethernet to USB converter * Wifi Control from Android in VM using usb passthrough * To passthrough USB host controller in TGL NUC, run the CIV launch script like this: sudo E ./scripts/start_civ.sh -g GVT-d --passthrough-pci-usb * Power Management - Shutdown and Reboot * Android Time keeping with Host OS * Product Information to Guest OS * ODM partition for vendor customizations * Only logitech C922 pro stream webcam is supported for all camera related testing * HW Video Codecs support on celadon Decoder * AVC High profile @ Level 5.1 (4k@30fps<mailto:4k@30fps>) * HEVC Main and Main 10 profile @ Level 5 (4k@30fps<mailto:4k@30fps>)(Main 10 with BT2020 and ST2084 information is not supported) * VP9 profile 0 @ Level 5 (4k@30fps<mailto:4k@30fps>) * Vp8 8 bits 1080p@60fps<mailto:1080p@60fps> Encoder * AVC High profile @ level 4.1 (1080P@30fps<mailto:1080P@30fps>) * HEVC Main profile @ Level 4 (1080P@30fps<mailto:1080P@30fps>) * Audio decoders supported: MP3, AAC-LC, AAC-ELD, HEAAC, HEAAC-V2, VORBIS, OPUS, MIDI, FLAC, PCM/WAV * Generic storage HAL supported * SATA emulation is supported * 9pfs based file transfer * Security SELinux enforcing, Trusty TEE, File Based Encryption, Trusty, Keymaster 3.0 * User guide: ? SELinux Configuration and Rules ? How to Enable or Disable Trusty for Debugging Important Remarks * For CaaS-CIV * Recommended system requirements for Host ? CPU: 4 cores or more ? RAM: 4GB or more ? Disk: 40GB or more * Recommended configuration for CPU cores & Memory allocated to Guest VM ? CPU: [default 1 core] ? RAM: [default 2GB] Known Issues * After recording the video in MultiCamera, it can be successfully played in MUltiCamera, but the playback in photos app fails * Android is not Booting UI after "adb reboot" when connected with eDP Display * Possible Buffer overflow with strncat in hcitools * Camera Preview Flickers * CFI failure seen during suspend/resume , This is merged on Latest HEAD * Android UI is flickering sometimes * Android UI doesn't launch in Mosaic mode * Captured Photo shows Black in ImageView.[AOSP Camera] * ADB goes offline after performing adb root/remount operation , this issue is fixed on the latest HEAD * Direct LAN to TGL NUC ethernet port is not working in this release * The fix patch for Direct LAN to TGL NUC ethernet port issue is as below - it is merged on the latest HEAD ? https://github.com/projectceladon/device-androidia-mixins/pull/1086 # 2021-03-30 # Add support for Ethernet Controller I225-V ? https://github.com/projectceladon/vendor-intel-utils/pull/1071 # 2021-03-30 # Enable config for Ethernet Controller I225-LM/I225-V support * Android UI Flicker when booted with eDP Display Validation Results |C|<https://github.com/projectceladon/celadon-documentation/blob/master/source/release-notes.rst#id176> build has been validated on |NUC|<https://github.com/projectceladon/celadon-documentation/blob/master/source/release-notes.rst#id178> Kit NUC11PAQI7<https://www.intel.in/content/www/in/en/products/boards-kits/nuc/kits/nuc11paqi7.html> in the following function domains: Component Results Comments Wi-Fi OK Host wifi is switched to Android UI in QEMU using usb pass through BT OK Bluetooth is working Audio Playback OK MP3, AAC-LC, AAC-ELD, HEAAC, HEAAC-V2, VORBIS, OPUS, FLAC, PCM/WAV formats supported Adb connect over WIFI OK Adb connect over Ethernet OK Display /Touch and Gesture OK Security OK Boot OK Boots on QEMU 4.2.0 Ethernet OK Image Flash OK Web browsing OK Video playback OK H264/H265/MPEG2/VP8/VP9 Video Playback USB OK Keyboard , Mouse , Pen drive Tools/Configuration * QEMU Version 4.2.0 * Host Ubuntu 20.04 * Host Kernel Version 5.4.76 [Build kernel from the tar ball of this release -Steps Below under hints section] * Guest kernel 5.4.76 Helpful Hints / Links * Build Celadon in VM https://01.org/projectceladon/documentation/getting-started/build-source#... * Flash Steps : https://01.org/projectceladon/documentation/getting-started/on-vm#build-c... * Manifest Link : https://github.com/projectceladon/manifest/blob/master/stable-build/CIV_0... * Binary Link : https://github.com/projectceladon/celadon-binary/tree/master/CIV_00.21.01... * If you plan to use Celadon in product, please replace all the test keys under device/intel/build/testkeys/ with your product key. * The release of this project will be signed by test keys, it's only a reference for our customer and we are not responsible for this. Customer should use their own keys to sign their release images * Steps To build the host kernel for this Manifest * Download caas-releasefiles-userdebug.tar.gz and put it under ~/civ * cd ~/civ && tar zxvf caas-releasefiles-userdebug.tar.gz * cd patches/kernel/lts2019-chromium * ./build_weekly.sh * Deb files will be generated in patches/kernel/lts2019-chromium/host_kernel * sudo dpkg -i *<https://github.com/projectceladon/celadon-documentation/blob/master/source/release-notes.rst#id4>.deb * Update grub to wait indefinitely for kernel selection on boot ? sudo vim /etc/default/grub ? Comment out GRUB_TIMEOUT_STYLE=hidden #GRUB_TIMEOUT_STYLE=hidden ? Uncomment following line and modify grub timeout to -1 for indefinite wait or 5 for 5secs wait #GRUB_TIMEOUT=-1 ? Save the file ? sudo update-grub * sudo reboot * Select compiled kernel from "Advanced options for Ubuntu" To subscribe/unsubscribe: - subscribe/unsubscribe celadon mailing list using : https://lists.01.org/postorius/lists/celadon.lists.01.org/