I know it's not really been validated on NUC8* models, but it's also a problem on
NUC7, and has always been a problem since the first time I had installed celadon_ivi on a
NUC7 in November.
Android 10 with CIV_00.20.01.09_A10
I am on that version and beyond, I am building myself to apply the IVI bluetooth profiles,
and am therefore using master.
BTW, about the pull request topic, I have opened
(not for this
issue with calling), but I don't know who to assign it to, and I have no access to
your buildserver to see why the build failed.
Valerio Pilo / PU IVI Amsterdam / valerio.pilo(a)tomtom.com / +31 (0)
20 7575 218 Amsterdam ODE / www.tomtom.com
From: Marathe, Yogesh <yogesh.marathe(a)intel.com>
Sent: Tuesday, May 12, 2020 20:15
To: Valerio Pilo <Valerio.Pilo(a)tomtom.com>; celadon(a)lists.01.org
<celadon(a)lists.01.org>; Pannala, Meenakshi <meenakshi.pannala(a)intel.com>;
Badrappan, Jeevaka <jeevaka.badrappan(a)intel.com>; Diwakar, Praveen
Cc: Balan, Swaroop <swaroop.balan(a)intel.com>
Subject: RE: Phone calls via NUC
NUC8* is not the NUC where CaaS has been validated (esp. Native part). If you have made
changes to Celadon and brought it up please feel free to raise a pull request if you wish
to contribute back. For NUC7*, I’m adding few more experts to see if you can get a help on
this, I think you are on Android 10 with CIV_00.20.01.09_A10, if you can please confirm.
P.S. I’ve responded to CEL-1113.
From: Valerio Pilo <Valerio.Pilo(a)tomtom.com>
Sent: Tuesday, May 12, 2020 6:55 PM
Celadon] Phone calls via NUC
Hello Celadon ML! ??
I have been experiencing an issue with phone calls, now with `caas` configured with IVI
bluetooth mode, but already since months ago when I had been using the old `celadon-ivi`
target. Therefore I think the problem elsewhere in the AOSP build, and I would like to ask
for a bit of help.
Running either build targets, phone calls does not route audio properly on neither
direction (the local sound cannot be heard on the remote phone, and the remote sound
cannot be heard on the local device).
A couple seconds after the call begins, audioserver crashes (the logs are attached), and
soon after a very high-pitched feedback noise gets output by the celadon device.
This happens on bare metal installations of both caas (with bluetooth ivi=true) and
celadon-ivi builds, on NUC8i5BEH2 and NUC7i5BNH.
Do you have any suggestion on how to fix this, or should I open a bug on Jira?
Valerio Pilo / PU IVI Amsterdam /
firstname.lastname@example.org<mailto:email@example.com> / +31 (0) 20 7575 218
Amsterdam ODE / www.tomtom.com<http://www.tomtom.com>