Hello Sundar,
Thank you for you answer! Unfortunately, I have no script to change since I am installing
Celadon CIV on bare metal, using the flashfiles.
Cheers
- Valerio
Valerio Pilo / PU IVI Amsterdam / valerio.pilo(a)tomtom.com / +31 (0)
20 7575 218 Amsterdam ODE /
www.tomtom.com
________________________________
From: Gnanasekaran, Sundar <sundar.gnanasekaran(a)intel.com>
Sent: Saturday, October 31, 2020 07:23
To: Xie, Cindy <cindy.xie(a)intel.com>; Valerio Pilo <Valerio.Pilo(a)tomtom.com>;
celadon(a)lists.01.org <celadon(a)lists.01.org>
Subject: [
01.org Celadon] Re: Android Auto (and more)
Hello Valerio Pilo,
For Issue 3 :
Please make below changes in start civ script to get the console :
Remove these 2 lines :
-chardev
socket,id=charserial0,path=$WORK_DIR<https://cactus-source.iind.intel....
\
-serial chardev:charserial0 \
And add below line :
-serial mon:stdio \
Thanks,
G Sundar
From: Xie, Cindy <cindy.xie(a)intel.com>
Sent: Saturday, October 31, 2020 7:13 AM
To: Valerio Pilo <Valerio.Pilo(a)tomtom.com>; celadon(a)lists.01.org
Subject: [
01.org Celadon] Re: Android Auto (and more)
Valerio,
Thanks for trying out Celadon! We will look into the issue you reported below.
Thx. - cindy
From: Valerio Pilo <Valerio.Pilo@tomtom.com<mailto:Valerio.Pilo@tomtom.com>>
Sent: Friday, October 30, 2020 5:20 PM
To: celadon@lists.01.org<mailto:celadon@lists.01.org>
Subject: [
01.org Celadon] Android Auto (and more)
Hello all,
I have been using CIV_00.20.04.39_A11 as a base to try and set up an Android 11 Auto build
based on the `caas` target. I am running it on my NUC7i3BNK, bare metal.
Unfortunately, I came across many issues. The worst ones are:
1. the OTA app (Car/SystemUpdater) gives to update_engine a path in the form
"/storage/usb_drive_name/ota.zip" that it cannot open. This breaks OTA updates.
Worked around for now by replacing "/storage/" with "/mnt/media_rw/"
in the path given to update_engine just to get OTAs working during my tests.
2. Constant native crash in libbluetooth.so (see attachment).
fyi: my caas' mixins.spec has "bluetooth: auto(ivi=true)".
I can fix the other problems, but without a fix from your side for issue 3, I can't
proceed. Would you be able to help me fix this problem?
I also have a few questions:
1. Is it in Intel's roadmap to add back official Android Auto support for Celadon?
2. Are the instructions on this
page<https://01.org/projectceladon/documentation/tutorials/dbc> up to date regarding
DbC? I still cannot make it work on a bare metal NUC7i3BNK and an Ubuntu 18.04 Dell
Precision laptop. Best I could get it to is "device offline" in ADB. I am using
this
cable<https://www.startech.com/en-gb/cables/usb3saa6>.
3. Is the serial connection read-only only for me? I can't get a working shell
since the update to 11.
Thank you for time.
Cheers
- Valerio
Valerio Pilo / PU IVI Amsterdam /
valerio.pilo@tomtom.com<mailto:valerio.pilo@tomtom.com> / +31 (0) 20 7575 218
Amsterdam ODE /
www.tomtom.com<http://www.tomtom.com>