Hi All, Has anyone observed USB ports not functioning on officially supported hardware? Intel® NUC Kit NUC7i5DNHE <https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc... Intel® NUC Kit NUC6CAYH <https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc... On Mon, Jul 1, 2019 at 9:48 PM Sathish <satish.chevuru(a)gmail.com&gt; wrote: -- Gaurav, Co-founder, TrainingData.io +1-917-386-3396 228 Webster Street, Palo Alto, CA, 94301

Out of four , three works fine , including back one , I am seeing the issue on front right side port . Thanks, Sathish On Tue, 2 Jul, 2019, 10:39 AM Tan, Ming, <ming.tan(a)intel.com&gt; wrote:

Hi, BIOS Version is : BNKBL357.86A.0047.2017.0518.1824 I used the same port to plugin the USB Storage Disk to Install the Celadon OS and installation is successful. But once the OS boots up and I connect camera or mouse , to it , It won't work. Thanks, Sathish On Tue, Jul 2, 2019 at 10:49 AM Tan, Ming <ming.tan(a)intel.com&gt; wrote:

how to connect to 'adb shell' using USB port? USB-USB cable? I though adb connect was only enabled over network for NUC, am I right? Can adb be connected over USB for NUC? Is it possible to disable XDCI and force Host-Mode in Android OS or BSP? -- Gaurav, Co-founder, TrainingData.io +1-917-386-3396 228 Webster Street, Palo Alto, CA, 94301

Hi Gaurav, In Celadon platform, the front port is designed to work as device mode port. For your case, you can apply the above two patches and build cel_kbl target to force host mode on your NUC (NUC7i7BNH). Make sure that your build workspace is new. Otherwise, the applied google_diff patches may conflict with the current patches. With the build with these two patches, the port is forced into host mode always. Alternatively, in your existing build, you can still switch the port role to host through this command in adb shell: #echo device > /sys/class/usb_role/intel_xhci_usb_sw-role-switch/role Thanks, Saranya From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Gaurav Gupta Sent: Wednesday, July 03, 2019 4:15 AM To: Zhang, Yanmin <yanmin.zhang(a)intel.com&gt; Cc: celadon(a)lists.01.org Subject: Re: [01.org Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Perhaps the port is forced to USB Device Mode. Can you use ‘adb shell’ to connect to Android form that port? how to connect to 'adb shell' using USB port? USB-USB cable? I though adb connect was only enabled over network for NUC, am I right? Can adb be connected over USB for NUC? Check BIOS menu to disable USB XDCI, then check if that port can be used as Host Mode. Is it possible to disable XDCI and force Host-Mode in Android OS or BSP? From: Celadon [mailto:celadon-bounces@lists.01.org<mailto:celadon-bounces@lists.01.org>] On Behalf Of Sathish Sent: Tuesday, July 02, 2019 1:31 PM To: Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>> Cc: Gaurav Gupta <gaurav@trainingdata.io<mailto:gaurav@trainingdata.io>>; celadon@lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Hi, BIOS Version is : BNKBL357.86A.0047.2017.0518.1824 I used the same port to plugin the USB Storage Disk to Install the Celadon OS and installation is successful. But once the OS boots up and I connect camera or mouse , to it , It won't work. Thanks, Sathish On Tue, Jul 2, 2019 at 10:49 AM Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>> wrote: Sathish: What is your BIOS version? If you enter the BIOS setup program, does the key board or mouse do work if connect to this port? BR/Tan Ming. From: Sathish [mailto:satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>] Sent: Tuesday, July 2, 2019 1:13 PM To: Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>> Cc: Gaurav Gupta <gaurav@trainingdata.io<mailto:gaurav@trainingdata.io>>; celadon@lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Out of four , three works fine , including back one , I am seeing the issue on front right side port . Thanks, Sathish On Tue, 2 Jul, 2019, 10:39 AM Tan, Ming, <ming.tan@intel.com<mailto:ming.tan@intel.com>> wrote: Sathish: How about the USB ports in the back side? BR/Tan Ming. From: Celadon [mailto:celadon-bounces@lists.01.org<mailto:celadon-bounces@lists.01.org>] On Behalf Of Gaurav Gupta Sent: Tuesday, July 2, 2019 1:03 PM To: Sathish <satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>> Cc: celadon@lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Hi All, Has anyone observed USB ports not functioning on officially supported hardware? Intel® NUC Kit NUC7i5DNHE<https://www.intel.com/content/www/us/en/products/boards-kit... Intel® NUC Kit NUC6CAYH<https://www.intel.com/content/www/us/en/products/boards-kits/... On Mon, Jul 1, 2019 at 9:48 PM Sathish <satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>> wrote: Hi, I installed celadon-eng build on NUC7i7BNH. I am using this for a video conferencing application. PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=9 TARGET_PRODUCT=celadon TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_ARCH=x86_64 TARGET_ARCH_VARIANT=x86_64 The front USB is non responsive for either Mouse, Keyboard, Camera or to Jabra Speaker. I am seeing this on the latest build , this was fine with omr1 version. I am seeing the same issue on cel_apl build as well. [ro.vendor.build.fingerprint]: [cel_apl/cel_apl/cel_apl:9/PPR2.181005.003.A1/sathish06162135:eng/test-keys] I am wondering , whether any of you have seen this issue during your installs. Do i need to use celadon certified NUC hardware ? Appreciate your inputs. Thanks, Sathish -- Celadon mailing list Celadon@lists.01.org<mailto:Celadon@lists.01.org> https://lists.01.org/mailman/listinfo/celadon -- Gaurav, Co-founder, TrainingData.io +1-917-386-3396 228 Webster Street, Palo Alto, CA, 94301 -- Celadon mailing list Celadon@lists.01.org<mailto:Celadon@lists.01.org> https://lists.01.org/mailman/listinfo/celadon -- Gaurav, Co-founder, TrainingData.io +1-917-386-3396 228 Webster Street, Palo Alto, CA, 94301

Hi, I tested the alternative and mouse is detected in the front port. Will use patches to build the OS. Thank you. Thanks, Sathish On Thu, Jul 4, 2019 at 3:56 PM Gopal, Saranya <saranya.gopal(a)intel.com&gt; wrote:

Hi Sathish, PFA the patch for Celadon target. Thanks, Saranya From: Sathish [mailto:satish.chevuru@gmail.com] Sent: Tuesday, August 13, 2019 2:32 PM To: Gopal, Saranya <saranya.gopal(a)intel.com&gt; Cc: Gaurav Gupta <gaurav(a)trainingdata.io&gt;; Zhang, Yanmin <yanmin.zhang(a)intel.com&gt;; celadon(a)lists.01.org; Prasad, RevatiX <revatix.prasad(a)intel.com&gt; Subject: Re: [01.org Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Hi Saranya, Could you please provide me the same patch for the celadon eng target. Thanks, Sathish On Fri, Jul 5, 2019 at 9:34 AM Sathish <satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>> wrote: Hi, I tested the alternative and mouse is detected in the front port. Will use patches to build the OS. Thank you. Thanks, Sathish On Thu, Jul 4, 2019 at 3:56 PM Gopal, Saranya <saranya.gopal@intel.com<mailto:saranya.gopal@intel.com>> wrote: Sorry.. corrected the typo below. It is ‘host’ to switch to host mode. #echo host > /sys/class/usb_role/intel_xhci_usb_sw-role-switch/role From: Celadon [mailto:celadon-bounces@lists.01.org<mailto:celadon-bounces@lists.01.org>] On Behalf Of Gopal, Saranya Sent: Thursday, July 04, 2019 3:54 PM To: Gaurav Gupta <gaurav@trainingdata.io<mailto:gaurav@trainingdata.io>>; Zhang, Yanmin <yanmin.zhang@intel.com<mailto:yanmin.zhang@intel.com>> Cc: celadon@lists.01.org<mailto:celadon@lists.01.org>; Prasad, RevatiX <revatix.prasad@intel.com<mailto:revatix.prasad@intel.com>> Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Hi Gaurav, In Celadon platform, the front port is designed to work as device mode port. For your case, you can apply the above two patches and build cel_kbl target to force host mode on your NUC (NUC7i7BNH). Make sure that your build workspace is new. Otherwise, the applied google_diff patches may conflict with the current patches. With the build with these two patches, the port is forced into host mode always. Alternatively, in your existing build, you can still switch the port role to host through this command in adb shell: #echo host > /sys/class/usb_role/intel_xhci_usb_sw-role-switch/role Thanks, Saranya From: Celadon [mailto:celadon-bounces@lists.01.org] On Behalf Of Gaurav Gupta Sent: Wednesday, July 03, 2019 4:15 AM To: Zhang, Yanmin <yanmin.zhang@intel.com<mailto:yanmin.zhang@intel.com>> Cc: celadon@lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Perhaps the port is forced to USB Device Mode. Can you use ‘adb shell’ to connect to Android form that port? how to connect to 'adb shell' using USB port? USB-USB cable? I though adb connect was only enabled over network for NUC, am I right? Can adb be connected over USB for NUC? Check BIOS menu to disable USB XDCI, then check if that port can be used as Host Mode. Is it possible to disable XDCI and force Host-Mode in Android OS or BSP? From: Celadon [mailto:celadon-bounces@lists.01.org<mailto:celadon-bounces@lists.01.org>] On Behalf Of Sathish Sent: Tuesday, July 02, 2019 1:31 PM To: Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>> Cc: Gaurav Gupta <gaurav@trainingdata.io<mailto:gaurav@trainingdata.io>>; celadon@lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Hi, BIOS Version is : BNKBL357.86A.0047.2017.0518.1824 I used the same port to plugin the USB Storage Disk to Install the Celadon OS and installation is successful. But once the OS boots up and I connect camera or mouse , to it , It won't work. Thanks, Sathish On Tue, Jul 2, 2019 at 10:49 AM Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>> wrote: Sathish: What is your BIOS version? If you enter the BIOS setup program, does the key board or mouse do work if connect to this port? BR/Tan Ming. From: Sathish [mailto:satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>] Sent: Tuesday, July 2, 2019 1:13 PM To: Tan, Ming <ming.tan@intel.com<mailto:ming.tan@intel.com>> Cc: Gaurav Gupta <gaurav@trainingdata.io<mailto:gaurav@trainingdata.io>>; celadon@lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Out of four , three works fine , including back one , I am seeing the issue on front right side port . Thanks, Sathish On Tue, 2 Jul, 2019, 10:39 AM Tan, Ming, <ming.tan@intel.com<mailto:ming.tan@intel.com>> wrote: Sathish: How about the USB ports in the back side? BR/Tan Ming. From: Celadon [mailto:celadon-bounces@lists.01.org<mailto:celadon-bounces@lists.01.org>] On Behalf Of Gaurav Gupta Sent: Tuesday, July 2, 2019 1:03 PM To: Sathish <satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>> Cc: celadon@lists.01.org<mailto:celadon@lists.01.org> Subject: Re: [01.org<http://01.org> Celadon] Unresponsive USB port on NUC7i7BNH - Celadon Hi All, Has anyone observed USB ports not functioning on officially supported hardware? Intel® NUC Kit NUC7i5DNHE<https://www.intel.com/content/www/us/en/products/boards-kit... Intel® NUC Kit NUC6CAYH<https://www.intel.com/content/www/us/en/products/boards-kits/... On Mon, Jul 1, 2019 at 9:48 PM Sathish <satish.chevuru@gmail.com<mailto:satish.chevuru@gmail.com>> wrote: Hi, I installed celadon-eng build on NUC7i7BNH. I am using this for a video conferencing application. PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=9 TARGET_PRODUCT=celadon TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_ARCH=x86_64 TARGET_ARCH_VARIANT=x86_64 The front USB is non responsive for either Mouse, Keyboard, Camera or to Jabra Speaker. I am seeing this on the latest build , this was fine with omr1 version. I am seeing the same issue on cel_apl build as well. [ro.vendor.build.fingerprint]: [cel_apl/cel_apl/cel_apl:9/PPR2.181005.003.A1/sathish06162135:eng/test-keys] I am wondering , whether any of you have seen this issue during your installs. Do i need to use celadon certified NUC hardware ? Appreciate your inputs. Thanks, Sathish -- Celadon mailing list Celadon@lists.01.org<mailto:Celadon@lists.01.org> https://lists.01.org/mailman/listinfo/celadon -- Gaurav, Co-founder, TrainingData.io +1-917-386-3396 228 Webster Street, Palo Alto, CA, 94301 -- Celadon mailing list Celadon@lists.01.org<mailto:Celadon@lists.01.org> https://lists.01.org/mailman/listinfo/celadon -- Gaurav, Co-founder, TrainingData.io +1-917-386-3396 228 Webster Street, Palo Alto, CA, 94301 -- Celadon mailing list Celadon@lists.01.org<mailto:Celadon@lists.01.org> https://lists.01.org/mailman/listinfo/celadon