On 04/13/2017 10:05 AM, Patrik Flykt wrote:
On Thu, 2017-04-13 at 09:32 +0200, Pierre Couderc wrote:
> I use connman but get no Scope:Global IPV6 address.
> What so I miss ?
> sudo ifconfig :
> wlan0 Link encap:Ethernet HWaddr 40:f0:2f:c6:9a:d2
> inet addr:192.168.163.11 Bcast:192.168.163.255
> inet6 addr: fe80::42f0:2fff:fec6:9ad2/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
If your network wlan0 is not configured for IPv6, there won't be any
Router Advertisments and thus ConnMan cannot configure global
If you know the network is configured with IPv6, check that
/proc/sys/net/ipv6/conf/wlan0/disable_ipv6 returns 0,
/proc/sys/net/ipv6/conf/default/accept_ra is 1 and that there are no
firewall rules eating IPv6 packets.
'connmanctl config wifi_XXXX ipv6 auto preferred' should restore
address autoconfiguration to sane values.
I have still a problem with connman.
Now I think it is with connman and IPV6 : because if I "systemctl
disable connman.service", and configura manually
/etc/network/interfaces, I get all IPV6 addresses (global and local) and
I have checked that I receive router advertisement packets (about every
Is there a way to get some logs of connman to debug the problem. How to
enable them, where are they..? (under debian)