Re: [Devel] Devel Digest, Vol 72, Issue 1: ACPICA version 20161117 released (Moore, Robert)

From: Devel [mailto:devel-bounces@acpica.org] On Behalf Of Alexei Fedorov Subject: Re: [Devel] Devel Digest, Vol 72, Issue 1: ACPICA version 20161117 released (Moore, Robert) Hi, When ACPI IORT template is created with "iasl.exe -T IORT", the generated ITS group node also contains 1 entry in the array of ID mappings: [0001] Type : 00 [0002] Length : 002C [0001] Revision : 00 [0004] Reserved : 00000000 [0004] Mapping Count : 00000001 [0004] Mapping Offset : 00000018 [0004] ItsCount : 00000001 [0004] Identifiers : 00000000 [0004] Input base : 00000000 [0004] ID Count : 00000000 [0004] Output Base : 00000000 [0004] Output Reference : 00000000 [0004] Flags (decoded below) : 00000000 Single Mapping : 0 This contradicts with the IO Remapping Table specification (http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Rem...) Table 11 which reads: "Number of ID mappings: This field has a value of 0. ITS groups do not have IDs. Reference to ID Array: This field has a value of 0. There is no ID array." That implies that "Mapping Count" and "Mapping Offset" fields should be set to 0 and ID array data removed.

If the Iort.asl template is compiled and then Iort.aml binary disassembled to Iort.dsl, SMMUv1 node lists incorrect offset for SMMU_NSgCfgIrpt Interrupt which has the same [0ECh 0236] value as for SMMU_NSgIrpt: [0ECh 0236 8] SMMU_NSgIrpt Interrupt : 0000000000000000 [0ECh 0236 8] SMMU_NSgCfgIrpt Interrupt : 0000000000000000 but should be set to [0F4h 0244]

Alexei. -----Original Message----- From: Devel [mailto:devel-bounces@acpica.org] On Behalf Of devel-request(a)acpica.org Sent: 19 December 2016 06:05 To: devel(a)acpica.org Subject: Devel Digest, Vol 72, Issue 1 Send Devel mailing list submissions to devel(a)acpica.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.acpica.org/mailman/listinfo/devel or, via email, send a message with subject or body 'help' to devel-request(a)acpica.org You can reach the person managing the list at devel-owner(a)acpica.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Devel digest..." Today's Topics: 1. Re: [PATCH] ACPI: allow compilation with bare metal compilers (Al Stone) 2. patch request for tbxfload.c (scole_mail) 3. ACPICA version 20161117 released (Moore, Robert) 4. Re: Question about the code in source/components/hardware/hwxfsleep.c (Al Stone) 5. [PATCH] Linux-specific header: Add support for s390x compilation (Colin King) 6. [PATCH] Linux-specific header: Add support for s390x compilation. (Colin King) 7. Re: [PATCH] acpi: Fix format string type mistakes (Zheng, Lv) ---------------------------------------------------------------------- Message: 1 Date: Tue, 15 Nov 2016 09:36:05 -0700 From: Al Stone <ahs3(a)redhat.com&gt; To: "Moore, Robert" <robert.moore(a)intel.com&gt;, &quot;linux-acpi(a)vger.kernel.org&quot; <linux-acpi(a)vger.kernel.org&gt;, &quot;devel(a)acpica.org&quot; <devel(a)acpica.org&gt;, &quot;linux-kernel(a)vger.kernel.org&quot; <linux-kernel(a)vger.kernel.org&gt; Cc: "Rafael J . Wysocki" <rjw(a)rjwysocki.net&gt;, Len Brown <lenb(a)kernel.org&gt;, "Zheng, Lv" <lv.zheng(a)intel.com&gt; Subject: Re: [Devel] [PATCH] ACPI: allow compilation with bare metal compilers Message-ID: <ac74e311-8482-9336-83c7-0eb5e84d81a5(a)redhat.com&gt; Content-Type: text/plain; charset=windows-1252 On 11/15/2016 08:43 AM, Moore, Robert wrote: > The design for all of this is as follows: > > 1) OS-dependent includes > 2) Compiler-specific includes > 3) acenv.h is the master file that pulls in the correct headers (one > compiler, and one OS) Sure, that's understood from the current structure. The issue is #3 -- there is no OS, in the sense of a run-time environment, so that assumption is incorrect in this case. All we know is that we're compiling the kernel and it needs to be able to run in complete isolation. > So, I think I see a couple of possible solutions for you: > > 1) If you are using GCC, the __GNUC__ symbol should already be defined. Right, which is what this patch is relying on. > 2) If "aclinux.h" works for you, we can either add a conditional case that would apply to your environment, or: I'm confused; I thought that was what this patch was doing. What is being suggested instead? > 2a) You could define _LINUX in your gcc invocations. This option might force changes in the kernel build which is otherwise not affected; this is only an issue with drivers/acpi/acpica/*. It may also cause ACPICA to build incorrectly for other OSs, but I'll have to look at that. Off hand, it seems like this would cause more problems with acenv.h. > > Because ACPICA supports many different environments, we don't want to have a "default" case which in a sense would only be an attempt to guess what the user intended. We want to have a clear error that tells the user that something important needs to be done before the code can be compiled. Understood, which is why I left the #error case; the intent is only to have a default when compiling Linux for bare-metal environments using GCC. Perhaps this is just a Linux-only modification... > Bob > > >> -----Original Message----- >> From: Al Stone [mailto:ahs3@redhat.com] >> Sent: Monday, November 14, 2016 3:09 PM >> To: linux-acpi(a)vger.kernel.org; devel(a)acpica.org; linux- >> kernel(a)vger.kernel.org >> Cc: Al Stone <ahs3(a)redhat.com&gt;; Rafael J . Wysocki >> <rjw(a)rjwysocki.net&gt;; Len Brown <lenb(a)kernel.org&gt;; Moore, Robert >> <robert.moore(a)intel.com&gt;; Zheng, Lv <lv.zheng(a)intel.com&gt; >> Subject: [PATCH] ACPI: allow compilation with bare metal compilers >> >> The ACPICA subsystem of the ACPI driver sets up a compilation >> environment for itself, adding in multiple typedefs unique to ACPICA >> that depend on where ACPICA will be used. >> >> The vast majority of such environments (Linux, QNX, ...) have an >> environment defined by the acenv.h header file. When using a Linaro >> compiler [1] specifically built to be used in an embedded environment >> with perhaps a kernel and an init process as the only things running, >> there is no environment defined for ACPICA so the typedefs it needs >> are not set up, causing compilation to fail badly unless ACPI is >> completely disabled. >> Since ACPI is enabled in the default config for the kernel, the >> compilation failure is fairly obvious. >> >> This may not be the optimal solution, but add in to the ACPI header >> file include/acpi/platform/acenv.h a default so that if GCC is being >> used, and all else fails, assume that we are going to be in a >> Linux-like environment and re-use the environment definition for >> Linux. This allows us to build a kernel using this compiler [1] with >> or without ACPI. >> >> [1] >> https://releases.linaro.org/components/toolchain/binaries/latest/aarc >> h64 -elff/gcc-linaro-6.1.1-2016-08-x86_64_aarch64-elf.tar.xz >> >> Signed-off-by: Al Stone <ahs3(a)redhat.com&gt; >> Cc: Rafael J. Wysocki <rjw(a)rjwysocki.net&gt; >> Cc: Len Brown <lenb(a)kernel.org&gt; >> Cc: Robert Moore <robert.moore(a)intel.com&gt; >> Cc: Lv Zheng <lv.zheng(a)intel.com&gt; >> --- >> include/acpi/platform/acenv.h | 15 +++++++++++++++ >> 1 file changed, 15 insertions(+) >> >> diff --git a/include/acpi/platform/acenv.h >> b/include/acpi/platform/acenv.h index 34cce72..cdd1cd6 100644 >> --- a/include/acpi/platform/acenv.h >> +++ b/include/acpi/platform/acenv.h >> @@ -234,6 +234,21 @@ >> #elif defined(_AED_EFI) || defined(_GNU_EFI) || defined(_EDK2_EFI) >> #include "acefi.h" >> >> +/* >> + * Up to this point, we've been looking for specific environments. >> +In >> + * some cases, there is no environment, and we're just working on >> +bare >> + * metal. However, since we're compiling the Linux kernel, let's >> +just >> + * pretend we're in a Linux environment. >> + */ >> +#elif defined(__GNUC__) && !defined(__INTEL_COMPILER) #if >> +!defined(_LINUX) #define _LINUX #endif #if !defined(__linux__) >> +#define __linux__ #endif #include <acpi/platform/aclinux.h> >> + >> #else >> >> /* Unknown environment */ >> -- >> 2.10.2 > -- ciao, al ----------------------------------- Al Stone Software Engineer Red Hat, Inc. ahs3(a)redhat.com ----------------------------------- ------------------------------ Message: 2 Date: Mon, 14 Nov 2016 08:58:57 -0800 From: scole_mail <scole_mail(a)gmx.com&gt; To: devel(a)acpica.org Subject: [Devel] patch request for tbxfload.c Message-ID: <87poly0zhq.fsf(a)gmx.com&gt; Content-Type: text/plain I was hoping this patch could be added. I am trying to run netbsd/ia64 on a simulator (ski). Without the patch, I get a segfault. With it, I get the same messages as previous acpica versions with no seg-faulting. I'm not sure if it is a just a ia64/ski issue, but it seems like AcpiGbl_DsdtIndex is never getting set. It looks like only AcpiTbInstallFixedTable() sets it, but I'm not seeing that called. AcpiTbInstallTableWithOverride() has a comment saying it sets it, but I don't see AcpiGbl_DsdtIndex passed to it either. Output with the patch is below. Thanks *** ./acpica-unix-20160930/source/components/tables/tbxfload.c.origMon Nov 14 08:44:43 2016 --- ./acpica-unix-20160930/source/components/tables/tbxfload.cMon Nov 14 08:47:04 2016 *************** *** 236,241 **** --- 236,250 ---- (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES); /* + * If AcpiGbl_DsdtIndex uninitialized, give up. + */ + if (AcpiGbl_DsdtIndex == ACPI_INVALID_TABLE_INDEX) + { + Status = AE_NO_ACPI_TABLES; + goto UnlockAndExit; + } + + /* * Load the namespace. The DSDT is required, but any SSDT and * PSDT tables are optional. Verify the DSDT. */ ACPI: RSDP 0x0000000000120420 00002C (v02 FBSD ) ACPI: XSDT 0x0000000000120444 00002C (v00 FBSD SKI 00000000 FBSD 00000000) ACPI BIOS Warning (bug): Incorrect checksum in table [APIC] - 0x00, should be 0x0C (20160930/tbprint- 233) ACPI: APIC 0x0000000000120470 000080 (v00 FBSD SKI 00000000 FBSD 00000000) ACPI Exception: AE_NO_ACPI_TABLES, While loading namespace from ACPI tables (20160930/tbxfload-111) ACPI Warning: AcpiEnable failed (20160930/utxfinit-184) acpi_probe: failed to enable subsystem ACPI Error: Could not remove SCI handler (20160930/evmisc-312) acpi0 at mainbus0: Intel ACPICA 20160930 acpi0: X/RSDT: OemId < FBSD, SKI,00000000>, AslId <FBSD,00000000> ACPI Warning: AcpiEnable failed (20160930/utxfinit-184) acpi_attach: failed to initialize ACPI: AE_NO_ACPI_TABLES ------------------------------ Message: 3 Date: Thu, 17 Nov 2016 17:42:39 +0000 From: "Moore, Robert" <robert.moore(a)intel.com&gt; To: acpica.org list <devel(a)acpica.org&gt; Subject: [Devel] ACPICA version 20161117 released Message-ID: <94F2FBAB4432B54E8AACC7DFDE6C92E37E52E0B6(a)ORSMSX110.amr.corp.intel.com&gt; Content-Type: text/plain; charset="us-ascii" 17 November 2016. Summary of changes for version 20161117: This release is available at https://acpica.org/downloads 1) ACPICA kernel-resident subsystem: Table Manager: Fixed a regression introduced in 20160729, "FADT support cleanup". This was an attempt to remove all references in the source to the FADT version 2, which never was a legal version number. It was skipped because it was an early version of 64-bit support that was eventually abandoned for the current 64-bit support. Interpreter: Fixed a problem where runtime implicit conversion was incorrectly disabled for the ASL operators below. This brings the behavior into compliance with the ACPI specification: FromBCD ToBCD ToDecimalString ToHexString ToInteger ToBuffer Table Manager: Added a new public interface, AcpiPutTable, used to release and free an ACPI table returned by AcpiGetTable and related interfaces. Lv Zheng. Example Code and Data Size: These are the sizes for the OS-independent acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The debug version of the code includes the debug output trace mechanism and has a much larger code and data size. Current Release: Non-Debug Version: 140.5K Code, 58.5K Data, 198.9K Total Debug Version: 201.3K Code, 82.7K Data, 284.0K Total Previous Release: Non-Debug Version: 140.4K Code, 58.1K Data, 198.5K Total Debug Version: 200.7K Code, 82.1K Data, 282.8K Total 2) iASL Compiler/Disassembler and Tools: Disassembler: Fixed a regression for disassembly of Resource Template. Detection of templates in the AML stream missed some types of templates. iASL: Fixed a problem where an Access Size error was returned for the PCC address space when the AccessSize of the GAS register is greater than a DWORD. Hoan Tran. iASL: Implemented several grammar changes for the operators below. These changes are slated for the next version of the ACPI specification: RefOf - Disallow method invocation as an operand CondRefOf - Disallow method invocation as an operand DerefOf - Disallow operands that use the result from operators that do not return a reference (Changed TermArg to SuperName). iASL: Control method invocations are now allowed for Target operands, as per the ACPI specification. Removed error for using a control method invocation as a Target operand. Disassembler: Improved detection of Resource Templates, Unicode, and Strings within Buffer objects. These subtypes do not contain a specific opcode to indicate the originating ASL code, and they must be detected by other means within the disassembler. iASL: Implemented an optimization improvement for 32-bit ACPI tables (DSDT/SSDT). For the 32-bit case only, compute the optimum integer opcode only after 64-bit to 32-bit truncation. A truncation warning message is still emitted, however. AcpiXtract: Implemented handling for both types of line terminators (LF or CR/LF) so that it can accept AcpiDump output files from any system. Peter Wu. AcpiBin: Added two new options for comparing AML files: -a: compare and display ALL mismatches -o: start compare at this offset into the second file ------------------------------ Message: 4 Date: Mon, 21 Nov 2016 12:46:52 -0700 From: Al Stone <ahs3(a)redhat.com&gt; To: Kein Yuan <kein.yuan(a)yahoo.com&gt;, &quot;devel(a)acpica.org&quot; <devel(a)acpica.org&gt; Subject: Re: [Devel] Question about the code in source/components/hardware/hwxfsleep.c Message-ID: <08d8e4d2-bc84-52bf-f8af-c7fbd469754f(a)redhat.com&gt; Content-Type: text/plain; charset=windows-1252 On 11/11/2016 04:53 PM, Kein Yuan wrote: > Hi ACPICA experts, > A quick question, > > File: source/components/hardware/hwxfsleep.c > Function: AcpiHwSetFirmwareWakingVector > > static ACPI_STATUS > AcpiHwSetFirmwareWakingVector ( > ACPI_TABLE_FACS *Facs, > ACPI_PHYSICAL_ADDRESS PhysicalAddress, > ACPI_PHYSICAL_ADDRESS PhysicalAddress64) > { > ACPI_FUNCTION_TRACE (AcpiHwSetFirmwareWakingVector); > > > /* > * According to the ACPI specification 2.0c and later, the 64-bit > * waking vector should be cleared and the 32-bit waking vector should > * be used, unless we want the wake-up code to be called by the BIOS in > * Protected Mode. Some systems (for example HP dv5-1004nr) are known > * to fail to resume if the 64-bit vector is used. > */ > > /* Set the 32-bit vector */ > > Facs->FirmwareWakingVector = (UINT32) PhysicalAddress; > > if (Facs->Length > 32) // ---------------------> Question for this compare > { > if (Facs->Version >= 1) > { > /* Set the 64-bit vector */ > > Facs->XFirmwareWakingVector = PhysicalAddress64; > } > else > { > /* Clear the 64-bit vector if it exists */ > > Facs->XFirmwareWakingVector = 0; > } > } > > return_ACPI_STATUS (AE_OK); > } > > Since the FACS structure defined as: > typedef struct acpi_table_facs > { > char Signature[4]; /* ASCII table signature */ > UINT32 Length; /* Length of structure, in > bytes */ > UINT32 HardwareSignature; /* Hardware configuration > signature */ > UINT32 FirmwareWakingVector; /* 32-bit physical address > of the Firmware Waking Vector */ > UINT32 GlobalLock; /* Global Lock for shared > hardware resources */ > UINT32 Flags; > UINT64 XFirmwareWakingVector; /* 64-bit version of the > Firmware Waking Vector (ACPI 2.0+) */ > UINT8 Version; /* Version of this table > (ACPI 2.0+) */ > UINT8 Reserved[3]; /* Reserved, must be zero */ > UINT32 OspmFlags; /* Flags to be set by OSPM > (ACPI 4.0) */ > UINT8 Reserved1[24]; /* Reserved, must be zero */ > > } ACPI_TABLE_FACS; > > > May I know in what case Facs->Length < 32? > > If looks to me that Facs->XFirmwareWakingVector = PhysicalAddress64; will always > be executed? > > Thanks, > Kein IIRC, very old versions of the FACS were < 32 bytes long; those old versions did not have a XFirmwareWakingVector field, or a proper Version field. For that case, the function just returns after doing nothing. If the FACS is larger than 32 bytes, it should have a Version field, but it looks like version 1 does not have a usable XFirmwareWakingVector field -- i.e., it is defined in the struct, but is not valid until a later version of the ACPI specification where Facs->Version >= 2. So, for Version == 1, ignore the field, but for versions > 1, set the field. Does that help? -- ciao, al ----------------------------------- Al Stone Software Engineer Red Hat, Inc. ahs3(a)redhat.com ----------------------------------- ------------------------------ Message: 5 Date: Wed, 30 Nov 2016 13:16:26 +0000 From: Colin King <colin.king(a)canonical.com&gt; To: devel(a)acpica.org Subject: [Devel] [PATCH] Linux-specific header: Add support for s390x compilation Message-ID: <20161130131627.25030-1-colin.king(a)canonical.com&gt; Content-Type: text/plain; charset="utf-8" From: Colin Ian King <colin.king(a)canonical.com&gt; While porting ACPCIA integrated into fwts I discovered that I get build issues on s390x because ACPCIA does not know it is a 64 bit architecture. Update aclinux.h to support this architecture. Colin Ian King (1): Linux-specific header: Add support for s390x compilation. source/include/platform/aclinux.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) -- 2.10.2 ------------------------------ Message: 6 Date: Wed, 30 Nov 2016 13:16:27 +0000 From: Colin King <colin.king(a)canonical.com&gt; To: devel(a)acpica.org Subject: [Devel] [PATCH] Linux-specific header: Add support for s390x compilation. Message-ID: <20161130131627.25030-2-colin.king(a)canonical.com&gt; Content-Type: text/plain; charset="utf-8" From: Colin Ian King <colin.king(a)canonical.com&gt; Adds s390x as a 64-bit architecture. Signed-off-by: Colin Ian King <colin.king(a)canonical.com&gt; --- source/include/platform/aclinux.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/source/include/platform/aclinux.h b/source/include/platform/aclinux.h index 6f7c577..9d0927b 100644 --- a/source/include/platform/aclinux.h +++ b/source/include/platform/aclinux.h @@ -265,7 +265,8 @@ #define ACPI_CAST_PTHREAD_T(Pthread) ((ACPI_THREAD_ID) (Pthread)) #if defined(__ia64__) || defined(__x86_64__) ||\ - defined(__aarch64__) || defined(__PPC64__) + defined(__aarch64__) || defined(__PPC64__) ||\ + defined(__s390x__) #define ACPI_MACHINE_WIDTH 64 #define COMPILER_DEPENDENT_INT64 long #define COMPILER_DEPENDENT_UINT64 unsigned long -- 2.10.2 ------------------------------ Message: 7 Date: Mon, 19 Dec 2016 06:05:09 +0000 From: "Zheng, Lv" <lv.zheng(a)intel.com&gt; To: Kees Cook <keescook(a)chromium.org&gt;, "Moore, Robert" <robert.moore(a)intel.com&gt; Cc: &quot;linux-kernel(a)vger.kernel.org&quot; <linux-kernel(a)vger.kernel.org&gt;, "Wysocki, Rafael J" <rafael.j.wysocki(a)intel.com&gt;, Len Brown <lenb(a)kernel.org&gt;, &quot;linux-acpi(a)vger.kernel.org&quot; <linux-acpi(a)vger.kernel.org&gt;, Emese Revfy <re.emese(a)gmail.com&gt;, &quot;devel(a)acpica.org&quot; <devel(a)acpica.org&gt; Subject: Re: [Devel] [PATCH] acpi: Fix format string type mistakes Message-ID: <1AE640813FDE7649BE1B193DEA596E886CDFF331(a)SHSMSX101.ccr.corp.intel.com&gt; Content-Type: text/plain; charset="us-ascii" Hi, > From: Kees Cook [mailto:keescook@chromium.org] > Subject: [PATCH] acpi: Fix format string type mistakes > > From: Emese Revfy <re.emese(a)gmail.com&gt; > > This adds the missing __printf attribute which allows compile time > format string checking (and will be used by the coming initify gcc > plugin). Additionally, this fixes the warnings exposed by the attribute. > > Signed-off-by: Emese Revfy <re.emese(a)gmail.com&gt; > [kees: split scsi/acpi, merged attr and fix, new commit messages] > Signed-off-by: Kees Cook <keescook(a)chromium.org&gt; > --- > drivers/acpi/acpica/dbhistry.c | 2 +- > drivers/acpi/acpica/dbinput.c | 10 ++--- > drivers/acpi/acpica/dbstats.c | 88 +++++++++++++++++++++--------------------- > drivers/acpi/acpica/utdebug.c | 2 +- > include/acpi/acpiosxf.h | 3 +- > 5 files changed, 53 insertions(+), 52 deletions(-) > > diff --git a/drivers/acpi/acpica/dbhistry.c b/drivers/acpi/acpica/dbhistry.c > index 46bd65d38df9..ec9da4830f6a 100644 > --- a/drivers/acpi/acpica/dbhistry.c > +++ b/drivers/acpi/acpica/dbhistry.c > @@ -155,7 +155,7 @@ void acpi_db_display_history(void) > > for (i = 0; i < acpi_gbl_num_history; i++) { > if (acpi_gbl_history_buffer[history_index].command) { > -acpi_os_printf("%3ld %s\n", > +acpi_os_printf("%3u %s\n", > acpi_gbl_history_buffer[history_index]. > cmd_num, > acpi_gbl_history_buffer[history_index]. > diff --git a/drivers/acpi/acpica/dbinput.c b/drivers/acpi/acpica/dbinput.c > index 068214f9cc9d..43be06bdb790 100644 > --- a/drivers/acpi/acpica/dbinput.c > +++ b/drivers/acpi/acpica/dbinput.c > @@ -608,7 +608,7 @@ static u32 acpi_db_get_line(char *input_buffer) > (acpi_gbl_db_parsed_buf, sizeof(acpi_gbl_db_parsed_buf), > input_buffer)) { > acpi_os_printf > - ("Buffer overflow while parsing input line (max %u characters)\n", > + ("Buffer overflow while parsing input line (max %lu characters)\n", > sizeof(acpi_gbl_db_parsed_buf)); > return (0); > } > @@ -864,24 +864,24 @@ acpi_db_command_dispatch(char *input_buffer, > > if (param_count == 0) { > acpi_os_printf > - ("Current debug level for file output is: %8.8lX\n", > + ("Current debug level for file output is: %8.8X\n", > acpi_gbl_db_debug_level); > acpi_os_printf > - ("Current debug level for console output is: %8.8lX\n", > + ("Current debug level for console output is: %8.8X\n", > acpi_gbl_db_console_debug_level); > } else if (param_count == 2) { > temp = acpi_gbl_db_console_debug_level; > acpi_gbl_db_console_debug_level = > strtoul(acpi_gbl_db_args[1], NULL, 16); > acpi_os_printf > - ("Debug Level for console output was %8.8lX, now %8.8lX\n", > + ("Debug Level for console output was %8.8X, now %8.8X\n", > temp, acpi_gbl_db_console_debug_level); > } else { > temp = acpi_gbl_db_debug_level; > acpi_gbl_db_debug_level = > strtoul(acpi_gbl_db_args[1], NULL, 16); > acpi_os_printf > - ("Debug Level for file output was %8.8lX, now %8.8lX\n", > + ("Debug Level for file output was %8.8X, now %8.8X\n", > temp, acpi_gbl_db_debug_level); > } > break; > diff --git a/drivers/acpi/acpica/dbstats.c b/drivers/acpi/acpica/dbstats.c > index a414e1fa6f9d..de7023024b12 100644 > --- a/drivers/acpi/acpica/dbstats.c > +++ b/drivers/acpi/acpica/dbstats.c > @@ -377,17 +377,17 @@ acpi_status acpi_db_display_statistics(char *type_arg) > "ACPI_TYPE", "NODES", "OBJECTS"); > > for (i = 0; i < ACPI_TYPE_NS_NODE_MAX; i++) { > -acpi_os_printf("%16.16s % 10ld% 10ld\n", > +acpi_os_printf("%16.16s % 10d% 10d\n", > acpi_ut_get_type_name(i), > acpi_gbl_node_type_count[i], > acpi_gbl_obj_type_count[i]); > } > > -acpi_os_printf("%16.16s % 10ld% 10ld\n", "Misc/Unknown", > +acpi_os_printf("%16.16s % 10d% 10d\n", "Misc/Unknown", > acpi_gbl_node_type_count_misc, > acpi_gbl_obj_type_count_misc); > > -acpi_os_printf("%16.16s % 10ld% 10ld\n", "TOTALS:", > +acpi_os_printf("%16.16s % 10d% 10d\n", "TOTALS:", > acpi_gbl_num_nodes, acpi_gbl_num_objects); > break; > > @@ -415,16 +415,16 @@ acpi_status acpi_db_display_statistics(char *type_arg) > case CMD_STAT_MISC: > > acpi_os_printf("\nMiscellaneous Statistics:\n\n"); > -acpi_os_printf("Calls to AcpiPsFind:.. ........% 7ld\n", > +acpi_os_printf("Calls to AcpiPsFind:.. ........% 7u\n", > acpi_gbl_ps_find_count); > -acpi_os_printf("Calls to AcpiNsLookup:..........% 7ld\n", > +acpi_os_printf("Calls to AcpiNsLookup:..........% 7u\n", > acpi_gbl_ns_lookup_count); > > acpi_os_printf("\n"); > > acpi_os_printf("Mutex usage:\n\n"); > for (i = 0; i < ACPI_NUM_MUTEX; i++) { > -acpi_os_printf("%-28s: % 7ld\n", > +acpi_os_printf("%-28s: % 7u\n", > acpi_ut_get_mutex_name(i), > acpi_gbl_mutex_info[i].use_count); > } > @@ -434,87 +434,87 @@ acpi_status acpi_db_display_statistics(char *type_arg) > > acpi_os_printf("\nInternal object sizes:\n\n"); > > -acpi_os_printf("Common %3d\n", > +acpi_os_printf("Common %3lu\n", > sizeof(struct acpi_object_common)); > -acpi_os_printf("Number %3d\n", > +acpi_os_printf("Number %3lu\n", > sizeof(struct acpi_object_integer)); > -acpi_os_printf("String %3d\n", > +acpi_os_printf("String %3lu\n", > sizeof(struct acpi_object_string)); > -acpi_os_printf("Buffer %3d\n", > +acpi_os_printf("Buffer %3lu\n", > sizeof(struct acpi_object_buffer)); > -acpi_os_printf("Package %3d\n", > +acpi_os_printf("Package %3lu\n", > sizeof(struct acpi_object_package)); > -acpi_os_printf("BufferField %3d\n", > +acpi_os_printf("BufferField %3lu\n", > sizeof(struct acpi_object_buffer_field)); > -acpi_os_printf("Device %3d\n", > +acpi_os_printf("Device %3lu\n", > sizeof(struct acpi_object_device)); > -acpi_os_printf("Event %3d\n", > +acpi_os_printf("Event %3lu\n", > sizeof(struct acpi_object_event)); > -acpi_os_printf("Method %3d\n", > +acpi_os_printf("Method %3lu\n", > sizeof(struct acpi_object_method)); > -acpi_os_printf("Mutex %3d\n", > +acpi_os_printf("Mutex %3lu\n", > sizeof(struct acpi_object_mutex)); > -acpi_os_printf("Region %3d\n", > +acpi_os_printf("Region %3lu\n", > sizeof(struct acpi_object_region)); > -acpi_os_printf("PowerResource %3d\n", > +acpi_os_printf("PowerResource %3lu\n", > sizeof(struct acpi_object_power_resource)); > -acpi_os_printf("Processor %3d\n", > +acpi_os_printf("Processor %3lu\n", > sizeof(struct acpi_object_processor)); > -acpi_os_printf("ThermalZone %3d\n", > +acpi_os_printf("ThermalZone %3lu\n", > sizeof(struct acpi_object_thermal_zone)); > -acpi_os_printf("RegionField %3d\n", > +acpi_os_printf("RegionField %3lu\n", > sizeof(struct acpi_object_region_field)); > -acpi_os_printf("BankField %3d\n", > +acpi_os_printf("BankField %3lu\n", > sizeof(struct acpi_object_bank_field)); > -acpi_os_printf("IndexField %3d\n", > +acpi_os_printf("IndexField %3lu\n", > sizeof(struct acpi_object_index_field)); > -acpi_os_printf("Reference %3d\n", > +acpi_os_printf("Reference %3lu\n", > sizeof(struct acpi_object_reference)); > -acpi_os_printf("Notify %3d\n", > +acpi_os_printf("Notify %3lu\n", > sizeof(struct acpi_object_notify_handler)); > -acpi_os_printf("AddressSpace %3d\n", > +acpi_os_printf("AddressSpace %3lu\n", > sizeof(struct acpi_object_addr_handler)); > -acpi_os_printf("Extra %3d\n", > +acpi_os_printf("Extra %3lu\n", > sizeof(struct acpi_object_extra)); > -acpi_os_printf("Data %3d\n", > +acpi_os_printf("Data %3lu\n", > sizeof(struct acpi_object_data)); > > acpi_os_printf("\n"); > > -acpi_os_printf("ParseObject %3d\n", > +acpi_os_printf("ParseObject %3lu\n", > sizeof(struct acpi_parse_obj_common)); > -acpi_os_printf("ParseObjectNamed %3d\n", > +acpi_os_printf("ParseObjectNamed %3lu\n", > sizeof(struct acpi_parse_obj_named)); > -acpi_os_printf("ParseObjectAsl %3d\n", > +acpi_os_printf("ParseObjectAsl %3lu\n", > sizeof(struct acpi_parse_obj_asl)); > -acpi_os_printf("OperandObject %3d\n", > +acpi_os_printf("OperandObject %3lu\n", > sizeof(union acpi_operand_object)); > -acpi_os_printf("NamespaceNode %3d\n", > +acpi_os_printf("NamespaceNode %3lu\n", > sizeof(struct acpi_namespace_node)); > -acpi_os_printf("AcpiObject %3d\n", > +acpi_os_printf("AcpiObject %3lu\n", > sizeof(union acpi_object)); > > acpi_os_printf("\n"); > > -acpi_os_printf("Generic State %3d\n", > +acpi_os_printf("Generic State %3lu\n", > sizeof(union acpi_generic_state)); > -acpi_os_printf("Common State %3d\n", > +acpi_os_printf("Common State %3lu\n", > sizeof(struct acpi_common_state)); > -acpi_os_printf("Control State %3d\n", > +acpi_os_printf("Control State %3lu\n", > sizeof(struct acpi_control_state)); > -acpi_os_printf("Update State %3d\n", > +acpi_os_printf("Update State %3lu\n", > sizeof(struct acpi_update_state)); > -acpi_os_printf("Scope State %3d\n", > +acpi_os_printf("Scope State %3lu\n", > sizeof(struct acpi_scope_state)); > -acpi_os_printf("Parse Scope %3d\n", > +acpi_os_printf("Parse Scope %3lu\n", > sizeof(struct acpi_pscope_state)); > -acpi_os_printf("Package State %3d\n", > +acpi_os_printf("Package State %3lu\n", > sizeof(struct acpi_pkg_state)); > -acpi_os_printf("Thread State %3d\n", > +acpi_os_printf("Thread State %3lu\n", > sizeof(struct acpi_thread_state)); > -acpi_os_printf("Result Values %3d\n", > +acpi_os_printf("Result Values %3lu\n", > sizeof(struct acpi_result_values)); > -acpi_os_printf("Notify Info %3d\n", > +acpi_os_printf("Notify Info %3lu\n", > sizeof(struct acpi_notify_info)); > break; > > diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c > index 044df9b0356e..b4cdb9c14a87 100644 > --- a/drivers/acpi/acpica/utdebug.c > +++ b/drivers/acpi/acpica/utdebug.c > @@ -189,7 +189,7 @@ acpi_debug_print(u32 requested_debug_level, > * Display the module name, current line number, thread ID (if requested), > * current procedure nesting level, and the current procedure name > */ > -acpi_os_printf("%9s-%04ld ", module_name, line_number); > +acpi_os_printf("%9s-%04u ", module_name, line_number); > > #ifdef ACPI_APPLICATION > /* Please split above changes into a separate patch. I'm not sure if the changes can break other compilers. Please clone https://github.com/acpica/acpica, and submit a pull request there to have more ACPICA reviewers. > diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h > index f3414c83abb1..48b21490bbeb 100644 > --- a/include/acpi/acpiosxf.h > +++ b/include/acpi/acpiosxf.h > @@ -337,11 +337,12 @@ acpi_status acpi_os_signal(u32 function, void *info); > * Debug print routines > */ > #ifndef ACPI_USE_ALTERNATE_PROTOTYPE_acpi_os_printf > +__printf(1, 2) > void ACPI_INTERNAL_VAR_XFACE acpi_os_printf(const char *format, ...); > #endif > > #ifndef ACPI_USE_ALTERNATE_PROTOTYPE_acpi_os_vprintf > -void acpi_os_vprintf(const char *format, va_list args); > +__printf(1, 0) void acpi_os_vprintf(const char *format, va_list args); > #endif > > #ifndef ACPI_USE_ALTERNATE_PROTOTYPE_acpi_os_redirect_output You can use ACPI_PRINTF_LIKE macro instead. This can directly go into Linux upstream. You can prepare a different pull request for ACPICA upstream or I can help to back port the change. Thanks Lv > -- > 2.7.4 > > > -- > Kees Cook > Nexus Security ------------------------------ Subject: Digest Footer _______________________________________________ Devel mailing list Devel(a)acpica.org https://lists.acpica.org/mailman/listinfo/devel ------------------------------ End of Devel Digest, Vol 72, Issue 1 ************************************ IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ Devel mailing list Devel(a)acpica.org https://lists.acpica.org/mailman/listinfo/devel