I am trying to move to connman/iwd from netctl on a RPi. It currently has a PHP based UI to display the info and allow connections, etc. Connmanctl commands respond with text (no control characters, no colorization) iwdctl responds with text with control characters. If I use this command:: iwctl station wlan0 get-networks I get a response which looks like clear txt in my linux terminal connected by ssh, but it has control characters indicating which network is connected and the signal strength stars are all present and are either full brightness of grey depending on the signal. THis makes it challenging to feed this into php to be displayed in a browser... Is there a hidden flag to turn this off? Can this be added? If there are other suggestions on how to best deal with this, I am soliciting advice... What I get is this in php: sysCmd($str) ### iwctl station wlan0 get-networks | sed -e '1,4d' | tr -s ' ' sysCmd() output: ### $data type = array sysCmd() output: ### ['0'] => Edventures psk ***ESC[1;30m*ESC[0m sysCmd() output: ### ['1'] => Oliwia2009 psk *ESC[1;30m***ESC[0m sysCmd() output: ### ['2'] => HouseStark01 psk *ESC[1;30m***ESC[0m sysCmd() output: ### ['3'] => ATTeHeTKI2 psk *ESC[1;30m***ESC[0m sysCmd() output: ### ['4'] => monterrey psk *ESC[1;30m***ESC[0m sysCmd() output: ### ['5'] => ATTxZIQ4wa psk *ESC[1;30m***ESC[0m sysCmd() output: ### ['6'] => Wemo.Mini.25B open *ESC[1;30m***ESC[0m sysCmd() output: ### ['7'] => xfinitywifi open *ESC[1;30m***ESC[0m sysCmd() output: ### ['8'] => ESC[1;30m> ESC[0mspg2 psk **** I am trying to figure out how to use sed to remove the control characters, but tit would be easier if I could just turn it off. Is there a flag? Could one be added? Thanks, Gearhead