[kbuild-all] [luto:x86/fixes 6/13] arch/x86/mm/tlb.c:537:34: error: 'struct mm_struct' has no member named 'membarrier_state'

tree: https://git.kernel.org/pub/scm/linux/kernel/git/luto/linux.git x86/fixes head: 825cc79966034d2ab820a693fcb3b84565edd715 commit: 1efb7df703ce743e6d78c978ccabc0e0e787b4ea [6/13] x86/mm: Handle unlazying membarrier core sync in the arch code config: x86_64-randconfig-r005-20210321 (attached as .config) compiler: gcc-9 (Debian 9.3.0-22) 9.3.0 reproduce (this is a W=1 build): # https://git.kernel.org/pub/scm/linux/kernel/git/luto/linux.git/commit/?id... git remote add luto https://git.kernel.org/pub/scm/linux/kernel/git/luto/linux.git git fetch --no-tags luto x86/fixes git checkout 1efb7df703ce743e6d78c978ccabc0e0e787b4ea # save the attached .config to linux build tree make W=1 ARCH=x86_64 If you fix the issue, kindly add following tag as appropriate Reported-by: kernel test robot <lkp(a)intel.com&gt; All errors (new ones prefixed by >>): In file included from include/linux/init.h:5, from arch/x86/mm/tlb.c:2: arch/x86/mm/tlb.c: In function 'switch_mm_irqs_off': 537 | if (unlikely(atomic_read(&next->membarrier_state) & | ^~ include/linux/compiler.h:33:34: note: in definition of macro '__branch_check__' 33 | ______r = __builtin_expect(!!(x), expect); \ | ^ arch/x86/mm/tlb.c:537:8: note: in expansion of macro 'unlikely' 537 | if (unlikely(atomic_read(&next->membarrier_state) & | ^~~~~~~~ 538 | MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:33:34: note: in definition of macro '__branch_check__' 33 | ______r = __builtin_expect(!!(x), expect); \ | ^ arch/x86/mm/tlb.c:537:8: note: in expansion of macro 'unlikely' 537 | if (unlikely(atomic_read(&next->membarrier_state) & | ^~~~~~~~ arch/x86/mm/tlb.c:538:10: note: each undeclared identifier is reported only once for each function it appears in 538 | MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:33:34: note: in definition of macro '__branch_check__' 33 | ______r = __builtin_expect(!!(x), expect); \ | ^ arch/x86/mm/tlb.c:537:8: note: in expansion of macro 'unlikely' 537 | if (unlikely(atomic_read(&next->membarrier_state) & | ^~~~~~~~ 537 | if (unlikely(atomic_read(&next->membarrier_state) & | ^~ include/linux/compiler.h:35:19: note: in definition of macro '__branch_check__' 35 | expect, is_constant); \ | ^~~~~~~~~~~ arch/x86/mm/tlb.c:537:8: note: in expansion of macro 'unlikely' 537 | if (unlikely(atomic_read(&next->membarrier_state) & | ^~~~~~~~ vim +537 arch/x86/mm/tlb.c 422 423 void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, 424 struct task_struct *tsk) 425 { 426 struct mm_struct *real_prev = this_cpu_read(cpu_tlbstate.loaded_mm); 427 u16 prev_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid); 428 bool was_lazy = this_cpu_read(cpu_tlbstate.is_lazy); 429 unsigned cpu = smp_processor_id(); 430 u64 next_tlb_gen; 431 bool need_flush; 432 u16 new_asid; 433 434 /* 435 * NB: The scheduler will call us with prev == next when switching 436 * from lazy TLB mode to normal mode if active_mm isn't changing. 437 * When this happens, we don't assume that CR3 (and hence 438 * cpu_tlbstate.loaded_mm) matches next. 439 * 440 * NB: leave_mm() calls us with prev == NULL and tsk == NULL. 441 */ 442 443 /* We don't want flush_tlb_func_* to run concurrently with us. */ 444 if (IS_ENABLED(CONFIG_PROVE_LOCKING)) 445 WARN_ON_ONCE(!irqs_disabled()); 446 447 /* 448 * Verify that CR3 is what we think it is. This will catch 449 * hypothetical buggy code that directly switches to swapper_pg_dir 450 * without going through leave_mm() / switch_mm_irqs_off() or that 451 * does something like write_cr3(read_cr3_pa()). 452 * 453 * Only do this check if CONFIG_DEBUG_VM=y because __read_cr3() 454 * isn't free. 455 */ 456 #ifdef CONFIG_DEBUG_VM 457 if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid))) { 458 /* 459 * If we were to BUG here, we'd be very likely to kill 460 * the system so hard that we don't see the call trace. 461 * Try to recover instead by ignoring the error and doing 462 * a global flush to minimize the chance of corruption. 463 * 464 * (This is far from being a fully correct recovery. 465 * Architecturally, the CPU could prefetch something 466 * back into an incorrect ASID slot and leave it there 467 * to cause trouble down the road. It's better than 468 * nothing, though.) 469 */ 470 __flush_tlb_all(); 471 } 472 #endif 473 this_cpu_write(cpu_tlbstate.is_lazy, false); 474 475 /* 476 * membarrier() support requires that, when we change rq->curr->mm: 477 * 478 * - If next->mm has membarrier registered, a full memory barrier 479 * after writing rq->curr (or rq->curr->mm if we switched the mm 480 * without switching tasks) and before returning to user mode. 481 * 482 * - If next->mm has SYNC_CORE registered, then we sync core before 483 * returning to user mode. 484 * 485 * In the case where prev->mm == next->mm, membarrier() uses an IPI 486 * instead, and no particular barriers are needed while context 487 * switching. 488 * 489 * x86 gets all of this as a side-effect of writing to CR3 except 490 * in the case where we unlazy without flushing. 491 * 492 * All other architectures are civilized and do all of this implicitly 493 * when transitioning from kernel to user mode. 494 */ 495 if (real_prev == next) { 496 VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) != 497 next->context.ctx_id); 498 499 /* 500 * Even in lazy TLB mode, the CPU should stay set in the 501 * mm_cpumask. The TLB shootdown code can figure out from 502 * from cpu_tlbstate.is_lazy whether or not to send an IPI. 503 */ 504 if (WARN_ON_ONCE(real_prev != &init_mm && 505 !cpumask_test_cpu(cpu, mm_cpumask(next)))) 506 cpumask_set_cpu(cpu, mm_cpumask(next)); 507 508 /* 509 * If the CPU is not in lazy TLB mode, we are just switching 510 * from one thread in a process to another thread in the same 511 * process. No TLB flush or membarrier() synchronization 512 * is required. 513 */ 514 if (!was_lazy) 515 return; 516 517 /* 518 * Read the tlb_gen to check whether a flush is needed. 519 * If the TLB is up to date, just use it. 520 * The barrier synchronizes with the tlb_gen increment in 521 * the TLB shootdown code. 522 * 523 * As a future optimization opportunity, it's plausible 524 * that the x86 memory model is strong enough that this 525 * smp_mb() isn't needed. 526 */ 527 smp_mb(); 528 next_tlb_gen = atomic64_read(&next->context.tlb_gen); 529 if (this_cpu_read(cpu_tlbstate.ctxs[prev_asid].tlb_gen) == 530 next_tlb_gen) { 531 /* 532 * We switched logical mm but we're not going to 533 * write to CR3. We already did smp_mb() above, 534 * but membarrier() might require a sync_core() 535 * as well. 536 */ 539 sync_core_before_usermode(); 540 541 return; 542 } 543 544 /* 545 * TLB contents went out of date while we were in lazy 546 * mode. Fall through to the TLB switching code below. 547 * No need for an explicit membarrier invocation -- the CR3 548 * write will serialize. 549 */ 550 new_asid = prev_asid; 551 need_flush = true; 552 } else { 553 /* 554 * Avoid user/user BTB poisoning by flushing the branch 555 * predictor when switching between processes. This stops 556 * one process from doing Spectre-v2 attacks on another. 557 */ 558 cond_ibpb(tsk); 559 560 /* 561 * Stop remote flushes for the previous mm. 562 * Skip kernel threads; we never send init_mm TLB flushing IPIs, 563 * but the bitmap manipulation can cause cache line contention. 564 */ 565 if (real_prev != &init_mm) { 566 VM_WARN_ON_ONCE(!cpumask_test_cpu(cpu, 567 mm_cpumask(real_prev))); 568 cpumask_clear_cpu(cpu, mm_cpumask(real_prev)); 569 } 570 571 /* 572 * Start remote flushes and then read tlb_gen. 573 */ 574 if (next != &init_mm) 575 cpumask_set_cpu(cpu, mm_cpumask(next)); 576 next_tlb_gen = atomic64_read(&next->context.tlb_gen); 577 578 choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush); 579 580 /* Let nmi_uaccess_okay() know that we're changing CR3. */ 581 this_cpu_write(cpu_tlbstate.loaded_mm, LOADED_MM_SWITCHING); 582 barrier(); 583 } 584 585 if (need_flush) { 586 this_cpu_write(cpu_tlbstate.ctxs[new_asid].ctx_id, next->context.ctx_id); 587 this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen); 588 load_new_mm_cr3(next->pgd, new_asid, true); 589 590 trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); 591 } else { 592 /* The new ASID is already up to date. */ 593 load_new_mm_cr3(next->pgd, new_asid, false); 594 595 trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, 0); 596 } 597 598 /* Make sure we write CR3 before loaded_mm. */ 599 barrier(); 600 601 this_cpu_write(cpu_tlbstate.loaded_mm, next); 602 this_cpu_write(cpu_tlbstate.loaded_mm_asid, new_asid); 603 604 if (next != real_prev) { 605 cr4_update_pce_mm(next); 606 switch_ldt(real_prev, next); 607 } 608 } 609 --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org