[kbuild-all] [hare-scsi-devel:megaraid.v3 2/4] drivers/scsi/megaraid/megaraid_mbox.c:759:24: error: implicit declaration of function 'ioremap_nocache'; did you mean

tree: https://git.kernel.org/pub/scm/linux/kernel/git/hare/scsi-devel.git megaraid.v3 head: 9369ca8fe8c5e0b78306ef343c6c1e1eaec77956 commit: 9187b657e2257f892f70f96ae1e79e3d64a2e712 [2/4] megaraid_mbox: add ioport support config: ia64-allmodconfig (attached as .config) compiler: ia64-linux-gcc (GCC) 9.3.0 reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # https://git.kernel.org/pub/scm/linux/kernel/git/hare/scsi-devel.git/commi... git remote add hare-scsi-devel https://git.kernel.org/pub/scm/linux/kernel/git/hare/scsi-devel.git git fetch --no-tags hare-scsi-devel megaraid.v3 git checkout 9187b657e2257f892f70f96ae1e79e3d64a2e712 # save the attached .config to linux build tree COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64 If you fix the issue, kindly add following tag as appropriate Reported-by: kernel test robot <lkp(a)intel.com&gt; All error/warnings (new ones prefixed by >>): drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_probe_one': drivers/scsi/megaraid/megaraid_mbox.c:447:30: error: 'PCI_CONF_AMISIG' undeclared (first use in this function); did you mean 'PCI_CONF_AMISIG64'? 447 | pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic); | ^~~~~~~~~~~~~~~ | PCI_CONF_AMISIG64 drivers/scsi/megaraid/megaraid_mbox.c:447:30: note: each undeclared identifier is reported only once for each function it appears in drivers/scsi/megaraid/megaraid_mbox.c:448:16: error: 'HBA_SIGNATURE_471' undeclared (first use in this function); did you mean 'HBA_SIGNATURE_64_BIT'? 448 | if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE) | ^~~~~~~~~~~~~~~~~ | HBA_SIGNATURE_64_BIT drivers/scsi/megaraid/megaraid_mbox.c:448:46: error: 'HBA_SIGNATURE' undeclared (first use in this function) 448 | if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE) | ^~~~~~~~~~~~~ drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_init_mbox': 759 | raid_dev->baseaddr = ioremap_nocache(raid_dev->baseport, 128); | ^~~~~~~~~~~~~~~ | ioremap_cache 759 | raid_dev->baseaddr = ioremap_nocache(raid_dev->baseport, 128); | ^ In file included from drivers/scsi/megaraid/megaraid_mbox.c:70: drivers/scsi/megaraid/megaraid_mbox.c: In function 'mbox_post_cmd': 265 | outb_p(ENABLE_INTR_BYTE, (adapter)->baseport + TOGGLE_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:1455:3: note: in expansion of macro 'irq_enable' 1455 | irq_enable(adapter); | ^~~~~~~~~~ drivers/scsi/megaraid/megaraid_mbox.h:254:31: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 254 | outb_p(ISSUE_BYTE, (adapter)->baseport + CMD_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:1456:3: note: in expansion of macro 'issue_command' 1456 | issue_command(adapter); | ^~~~~~~~~~~~~ drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_ack_sequence': 2102 | byte = irq_state(adapter); | ^~~~ In file included from drivers/scsi/megaraid/megaraid_mbox.c:70: drivers/scsi/megaraid/megaraid_mbox.h:256:43: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 256 | #define irq_state(adapter) inb_p((adapter)->baseport + INTR_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2102:11: note: in expansion of macro 'irq_state' 2102 | byte = irq_state(adapter); | ^~~~~~~~~ drivers/scsi/megaraid/megaraid_mbox.h:259:28: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 259 | outb_p((value), (adapter)->baseport + INTR_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2106:4: note: in expansion of macro 'set_irq_state' 2106 | set_irq_state(adapter, byte); | ^~~~~~~~~~~~~ drivers/scsi/megaraid/megaraid_mbox.h:262:29: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 262 | outb_p(ACK_BYTE, (adapter)->baseport + ACK_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2159:4: note: in expansion of macro 'irq_ack' 2159 | irq_ack(adapter); | ^~~~~~~ drivers/scsi/megaraid/megaraid_mbox.c: In function 'mbox_post_sync_cmd': drivers/scsi/megaraid/megaraid_mbox.h:268:37: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 268 | outb_p(DISABLE_INTR_BYTE, (adapter)->baseport + TOGGLE_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2739:3: note: in expansion of macro 'irq_disable' 2739 | irq_disable(adapter); | ^~~~~~~~~~~ drivers/scsi/megaraid/megaraid_mbox.h:254:31: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 254 | outb_p(ISSUE_BYTE, (adapter)->baseport + CMD_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2740:3: note: in expansion of macro 'issue_command' 2740 | issue_command(adapter); | ^~~~~~~~~~~~~ drivers/scsi/megaraid/megaraid_mbox.c:2742:13: error: 'byte' undeclared (first use in this function) 2742 | while (!((byte = irq_state(adapter)) & INTR_VALID)) | ^~~~ In file included from drivers/scsi/megaraid/megaraid_mbox.c:70: drivers/scsi/megaraid/megaraid_mbox.h:256:43: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 256 | #define irq_state(adapter) inb_p((adapter)->baseport + INTR_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2742:20: note: in expansion of macro 'irq_state' 2742 | while (!((byte = irq_state(adapter)) & INTR_VALID)) | ^~~~~~~~~ 2742 | while (!((byte = irq_state(adapter)) & INTR_VALID)) | ^~~~~~~~~~ In file included from drivers/scsi/megaraid/megaraid_mbox.c:70: drivers/scsi/megaraid/megaraid_mbox.h:259:28: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 259 | outb_p((value), (adapter)->baseport + INTR_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2745:3: note: in expansion of macro 'set_irq_state' 2745 | set_irq_state(adapter, byte); | ^~~~~~~~~~~~~ 265 | outb_p(ENABLE_INTR_BYTE, (adapter)->baseport + TOGGLE_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2746:3: note: in expansion of macro 'irq_enable' 2746 | irq_enable(adapter); | ^~~~~~~~~~ drivers/scsi/megaraid/megaraid_mbox.h:262:29: error: 'adapter_t' {aka 'struct <anonymous>'} has no member named 'baseport' 262 | outb_p(ACK_BYTE, (adapter)->baseport + ACK_PORT) | ^~ drivers/scsi/megaraid/megaraid_mbox.c:2747:3: note: in expansion of macro 'irq_ack' 2747 | irq_ack(adapter); | ^~~~~~~ cc1: some warnings being treated as errors Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for FRAME_POINTER Depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS Selected by - FAULT_INJECTION_STACKTRACE_FILTER && FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT && !X86_64 && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86 vim +759 drivers/scsi/megaraid/megaraid_mbox.c 703 704 705 /* 706 * START: Mailbox Low Level Driver 707 * 708 * This is section specific to the single mailbox based controllers 709 */ 710 711 /** 712 * megaraid_init_mbox - initialize controller 713 * @adapter : our soft state 714 * 715 * - Allocate 16-byte aligned mailbox memory for firmware handshake 716 * - Allocate controller's memory resources 717 * - Find out all initialization data 718 * - Allocate memory required for all the commands 719 * - Use internal library of FW routines, build up complete soft state 720 */ 721 static int 722 megaraid_init_mbox(adapter_t *adapter) 723 { 724 struct pci_dev *pdev; 725 mraid_device_t *raid_dev; 726 int i; 727 uint32_t magic64; 728 729 730 adapter->ito = MBOX_TIMEOUT; 731 pdev = adapter->pdev; 732 733 /* 734 * Allocate and initialize the init data structure for mailbox 735 * controllers 736 */ 737 raid_dev = kzalloc(sizeof(mraid_device_t), GFP_KERNEL); 738 if (raid_dev == NULL) return -1; 739 740 741 /* 742 * Attach the adapter soft state to raid device soft state 743 */ 744 adapter->raid_device = (caddr_t)raid_dev; 745 raid_dev->fast_load = megaraid_fast_load; 746 747 748 // our baseport 749 raid_dev->baseport = pci_resource_start(pdev, 0); 750 751 if (pci_request_regions(pdev, "MegaRAID: LSI Logic Corporation") != 0) { 752 753 con_log(CL_ANN, (KERN_WARNING 754 "megaraid: mem region busy\n")); 755 756 goto out_free_raid_dev; 757 } 758 if (pci_resource_flags(pdev, 0) & IORESOURCE_MEM) { 760 761 if (!raid_dev->baseaddr) { 762 con_log(CL_ANN, (KERN_WARNING 763 "megaraid: could not map hba memory\n") ); 764 765 goto out_release_regions; 766 } 767 } else { 768 raid_dev->baseport += 0x10; 769 raid_dev->baseaddr = NULL; 770 } 771 /* initialize the mutual exclusion lock for the mailbox */ 772 spin_lock_init(&raid_dev->mailbox_lock); 773 774 /* allocate memory required for commands */ 775 if (megaraid_alloc_cmd_packets(adapter) != 0) 776 goto out_iounmap; 777 778 /* 779 * Issue SYNC cmd to flush the pending cmds in the adapter 780 * and initialize its internal state 781 */ 782 783 if (raid_dev->baseaddr) 784 if (megaraid_mbox_fire_sync_cmd(adapter)) 785 con_log(CL_ANN, ("megaraid: sync cmd failed\n")); 786 787 /* 788 * Setup the rest of the soft state using the library of 789 * FW routines 790 */ 791 792 /* request IRQ and register the interrupt service routine */ 793 if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid", 794 adapter)) { 795 796 con_log(CL_ANN, (KERN_WARNING 797 "megaraid: Couldn't register IRQ %d!\n", adapter->irq)); 798 goto out_alloc_cmds; 799 800 } 801 802 // Product info 803 if (megaraid_mbox_product_info(adapter) != 0) 804 goto out_free_irq; 805 806 // Do we support extended CDBs 807 adapter->max_cdb_sz = 10; 808 if (megaraid_mbox_extended_cdb(adapter) == 0) { 809 adapter->max_cdb_sz = 16; 810 } 811 812 /* 813 * Do we support cluster environment, if we do, what is the initiator 814 * id. 815 * NOTE: In a non-cluster aware firmware environment, the LLD should 816 * return 7 as initiator id. 817 */ 818 adapter->ha = 0; 819 adapter->init_id = -1; 820 if (megaraid_mbox_support_ha(adapter, &adapter->init_id) == 0) { 821 adapter->ha = 1; 822 } 823 824 /* 825 * Prepare the device ids array to have the mapping between the kernel 826 * device address and megaraid device address. 827 * We export the physical devices on their actual addresses. The 828 * logical drives are exported on a virtual SCSI channel 829 */ 830 megaraid_mbox_setup_device_map(adapter); 831 832 // If the firmware supports random deletion, update the device id map 833 if (megaraid_mbox_support_random_del(adapter)) { 834 835 // Change the logical drives numbers in device_ids array one 836 // slot in device_ids is reserved for target id, that's why 837 // "<=" below 838 for (i = 0; i <= MAX_LOGICAL_DRIVES_40LD; i++) { 839 adapter->device_ids[adapter->max_channel][i] += 0x80; 840 } 841 adapter->device_ids[adapter->max_channel][adapter->init_id] = 842 0xFF; 843 844 raid_dev->random_del_supported = 1; 845 } 846 847 /* 848 * find out the maximum number of scatter-gather elements supported by 849 * this firmware 850 */ 851 adapter->sglen = megaraid_mbox_get_max_sg(adapter); 852 853 // enumerate RAID and SCSI channels so that all devices on SCSI 854 // channels can later be exported, including disk devices 855 megaraid_mbox_enum_raid_scsi(adapter); 856 857 /* 858 * Other parameters required by upper layer 859 * 860 * maximum number of sectors per IO command 861 */ 862 adapter->max_sectors = megaraid_max_sectors; 863 864 /* 865 * number of queued commands per LUN. 866 */ 867 adapter->cmd_per_lun = megaraid_cmd_per_lun; 868 869 /* 870 * Allocate resources required to issue FW calls, when sysfs is 871 * accessed 872 */ 873 if (megaraid_sysfs_alloc_resources(adapter) != 0) 874 goto out_free_irq; 875 876 // Set the DMA mask to 64-bit. All supported controllers as capable of 877 // DMA in this range 878 pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64); 879 880 if (((magic64 == HBA_SIGNATURE_64_BIT) && 881 ((adapter->pdev->subsystem_device != 882 PCI_SUBSYS_ID_MEGARAID_SATA_150_6) && 883 (adapter->pdev->subsystem_device != 884 PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) || 885 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && 886 adapter->pdev->device == PCI_DEVICE_ID_VERDE) || 887 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && 888 adapter->pdev->device == PCI_DEVICE_ID_DOBSON) || 889 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && 890 adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) || 891 (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && 892 adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) || 893 (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && 894 adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) { 895 if (dma_set_mask(&adapter->pdev->dev, DMA_BIT_MASK(64))) { 896 con_log(CL_ANN, (KERN_WARNING 897 "megaraid: DMA mask for 64-bit failed\n")); 898 899 if (dma_set_mask(&adapter->pdev->dev, 900 DMA_BIT_MASK(32))) { 901 con_log(CL_ANN, (KERN_WARNING 902 "megaraid: 32-bit DMA mask failed\n")); 903 goto out_free_sysfs_res; 904 } 905 } 906 } 907 908 // setup tasklet for DPC 909 tasklet_init(&adapter->dpc_h, megaraid_mbox_dpc, 910 (unsigned long)adapter); 911 912 con_log(CL_DLEVEL1, (KERN_INFO 913 "megaraid mbox hba successfully initialized\n")); 914 915 return 0; 916 917 out_free_sysfs_res: 918 megaraid_sysfs_free_resources(adapter); 919 out_free_irq: 920 free_irq(adapter->irq, adapter); 921 out_alloc_cmds: 922 megaraid_free_cmd_packets(adapter); 923 out_iounmap: 924 if (raid_dev->baseaddr) 925 iounmap(raid_dev->baseaddr); 926 out_release_regions: 927 pci_release_regions(pdev); 928 out_free_raid_dev: 929 kfree(raid_dev); 930 931 return -1; 932 } 933 --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org