10:03 a.m.
Hi Robert,
I love your patch! Yet something to improve:
[auto build test ERROR on net-next/master]
url:
https://github.com/0day-ci/linux/commits/Robert-Marko/Add-support-for-Qua...
base: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
de1db4a6ed6241e34cab0e5059d4b56f6bae39b9
config: arm64-allyesconfig (attached as .config)
compiler: aarch64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O
~/bin/make.cross
chmod +x ~/bin/make.cross
#
https://github.com/0day-ci/linux/commit/bf3f094b38fe42c313ba63d67c21b64cf...
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review
Robert-Marko/Add-support-for-Qualcomm-QCA807x-PHYs/20210210-210217
git checkout bf3f094b38fe42c313ba63d67c21b64cffb7f7b1
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp(a)intel.com>
All errors (new ones prefixed by >>):
drivers/net/phy/qca807x.c: In function 'qca807x_read_copper_status':
> drivers/net/phy/qca807x.c:404:12: error: 'struct
phy_device' has no member named 'port'
404 | if (phydev->port
!= PORT_TP)
| ^~
drivers/net/phy/qca807x.c:405:9: error: 'struct phy_device' has no member named
'port'
405 | phydev->port = PORT_TP;
| ^~
drivers/net/phy/qca807x.c: In function 'qca807x_read_fiber_status':
drivers/net/phy/qca807x.c:494:12: error: 'struct phy_device' has no member
named 'port'
494 | if (phydev->port != PORT_FIBRE)
| ^~
drivers/net/phy/qca807x.c:495:9: error: 'struct phy_device' has no member named
'port'
495 | phydev->port = PORT_FIBRE;
| ^~
vim +404 drivers/net/phy/qca807x.c
399
400 static int qca807x_read_copper_status(struct phy_device *phydev, bool combo_port)
401 {
402 int ss, err, page, old_link = phydev->link;
403
404 if (phydev->port != PORT_TP)
405 phydev->port =
PORT_TP;
406
407 /* Only combo port has dual pages */
408 if (combo_port) {
409 /* Check whether copper page is set and set if needed */
410 page = phy_read(phydev, QCA807X_CHIP_CONFIGURATION);
411 if (!(page & QCA807X_BT_BX_REG_SEL)) {
412 page |= QCA807X_BT_BX_REG_SEL;
413 phy_write(phydev, QCA807X_CHIP_CONFIGURATION, page);
414 }
415 }
416
417 /* Update the link, but return if there was an error */
418 err = genphy_update_link(phydev);
419 if (err)
420 return err;
421
422 /* why bother the PHY if nothing can have changed */
423 if (phydev->autoneg == AUTONEG_ENABLE && old_link &&
phydev->link)
424 return 0;
425
426 phydev->speed = SPEED_UNKNOWN;
427 phydev->duplex = DUPLEX_UNKNOWN;
428 phydev->pause = 0;
429 phydev->asym_pause = 0;
430
431 err = genphy_read_lpa(phydev);
432 if (err < 0)
433 return err;
434
435 /* Read the QCA807x PHY-Specific Status register copper page,
436 * which indicates the speed and duplex that the PHY is actually
437 * using, irrespective of whether we are in autoneg mode or not.
438 */
439 ss = phy_read(phydev, QCA807X_PHY_SPECIFIC_STATUS);
440 if (ss < 0)
441 return ss;
442
443 if (ss & QCA807X_SS_SPEED_AND_DUPLEX_RESOLVED) {
444 int sfc;
445
446 sfc = phy_read(phydev, QCA807X_FUNCTION_CONTROL);
447 if (sfc < 0)
448 return sfc;
449
450 switch (FIELD_GET(QCA807X_SS_SPEED_MASK, ss)) {
451 case QCA807X_SS_SPEED_10:
452 phydev->speed = SPEED_10;
453 break;
454 case QCA807X_SS_SPEED_100:
455 phydev->speed = SPEED_100;
456 break;
457 case QCA807X_SS_SPEED_1000:
458 phydev->speed = SPEED_1000;
459 break;
460 }
461 if (ss & QCA807X_SS_DUPLEX)
462 phydev->duplex = DUPLEX_FULL;
463 else
464 phydev->duplex = DUPLEX_HALF;
465
466 if (ss & QCA807X_SS_MDIX)
467 phydev->mdix = ETH_TP_MDI_X;
468 else
469 phydev->mdix = ETH_TP_MDI;
470
471 switch (FIELD_GET(QCA807X_FC_MDI_CROSSOVER_MODE_MASK, sfc)) {
472 case QCA807X_FC_MDI_CROSSOVER_MANUAL_MDI:
473 phydev->mdix_ctrl = ETH_TP_MDI;
474 break;
475 case QCA807X_FC_MDI_CROSSOVER_MANUAL_MDIX:
476 phydev->mdix_ctrl = ETH_TP_MDI_X;
477 break;
478 case QCA807X_FC_MDI_CROSSOVER_AUTO:
479 phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
480 break;
481 }
482 }
483
484 if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
485 phy_resolve_aneg_pause(phydev);
486
487 return 0;
488 }
489
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org