early console in setup code early console in decompress_kernel input_data: 0x0000000002a2b26e input_len: 0x0000000000b6021f output: 0x0000000001000000 output_len: 0x000000000257830c run_size: 0x000000000300cce8 KASLR using RDTSC... Decompressing Linux... Parsing ELF... Performing relocations... done. Booting the kernel. [ 0.000000] Linux version 4.5.0-rc1 (kbuild@lkp-hsx03) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #6 Tue Jan 26 09:48:03 CST 2016 [ 0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-yocto-x86_64-10/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s2-01260945-92e963f50fc74041b5e9e744c330dca48e04f08d-20160126-121160-1yr2cmc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s2-01260945 branch=linus/master commit=92e963f50fc74041b5e9e744c330dca48e04f08d BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/vmlinuz-4.5.0-rc1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/5 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-yocto-x86_64-10::dhcp drbd.minor_count=8 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x087e8000, 0x087e8fff] PGTABLE [ 0.000000] BRK [0x087e9000, 0x087e9fff] PGTABLE [ 0.000000] BRK [0x087ea000, 0x087eafff] PGTABLE [ 0.000000] BRK [0x087eb000, 0x087ebfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x13aaa000-0x13fdffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6400 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE1737 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0C14 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0C88 0009F7 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE167F 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE16FF 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13aa9001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 2616790354 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000013fdffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] kasan: KernelAddressSanitizer initialized [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 724f000 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80489 [ 0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-yocto-x86_64-10/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s2-01260945-92e963f50fc74041b5e9e744c330dca48e04f08d-20160126-121160-1yr2cmc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s2-01260945 branch=linus/master commit=92e963f50fc74041b5e9e744c330dca48e04f08d BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/vmlinuz-4.5.0-rc1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/5 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-yocto-x86_64-10::dhcp drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 218504K/327160K available (15618K kernel code, 8429K rwdata, 8624K rodata, 1092K init, 13044K bss, 108656K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Linux version 4.5.0-rc1 (kbuild@lkp-hsx03) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #6 Tue Jan 26 09:48:03 CST 2016 [ 0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-yocto-x86_64-10/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s2-01260945-92e963f50fc74041b5e9e744c330dca48e04f08d-20160126-121160-1yr2cmc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s2-01260945 branch=linus/master commit=92e963f50fc74041b5e9e744c330dca48e04f08d BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/vmlinuz-4.5.0-rc1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/5 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-yocto-x86_64-10::dhcp drbd.minor_count=8 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x087e8000, 0x087e8fff] PGTABLE [ 0.000000] BRK [0x087e9000, 0x087e9fff] PGTABLE [ 0.000000] BRK [0x087ea000, 0x087eafff] PGTABLE [ 0.000000] BRK [0x087eb000, 0x087ebfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x13aaa000-0x13fdffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6400 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE1737 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0C14 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0C88 0009F7 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE167F 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE16FF 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13aa9001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 2616790354 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000013fdffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] kasan: KernelAddressSanitizer initialized [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 724f000 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80489 [ 0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-yocto-x86_64-10/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s2-01260945-92e963f50fc74041b5e9e744c330dca48e04f08d-20160126-121160-1yr2cmc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s2-01260945 branch=linus/master commit=92e963f50fc74041b5e9e744c330dca48e04f08d BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/vmlinuz-4.5.0-rc1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/5 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-yocto-x86_64-10::dhcp drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 218504K/327160K available (15618K kernel code, 8429K rwdata, 8624K rodata, 1092K init, 13044K bss, 108656K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8639 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] ODEBUG: selftest passed [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2926.328 MHz processor [ 0.271651] Calibrating delay loop (skipped) preset value.. 5852.65 BogoMIPS (lpj=29263280) [ 0.273374] pid_max: default: 32768 minimum: 301 [ 0.274339] ACPI: Core revision 20160108 [ 0.351972] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.353209] [ 0.353993] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.355186] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.358605] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.359603] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.360729] CPU: Intel Core i7 9xx (Nehalem Class Core i7) (family: 0x6, model: 0x1a, stepping: 0x3) [ 0.371977] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. [ 0.375466] enabled ExtINT on CPU#0 [ 0.377128] ENABLING IO-APIC IRQs [ 0.377863] init IO_APIC IRQs [ 0.378563] apic 0 pin 0 not connected [ 0.379439] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.381077] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.382690] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.384260] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.385866] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.387436] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.389115] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.390735] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.392303] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.393860] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.395500] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.397099] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.398759] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.400425] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.402037] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.403602] apic 0 pin 16 not connected [ 0.404401] apic 0 pin 17 not connected [ 0.405193] apic 0 pin 18 not connected [ 0.406005] apic 0 pin 19 not connected [ 0.406805] apic 0 pin 20 not connected [ 0.407607] apic 0 pin 21 not connected [ 0.408409] apic 0 pin 22 not connected [ 0.409200] apic 0 pin 23 not connected [ 0.410243] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.411419] Using local APIC timer interrupts. [ 0.411419] calibrating APIC timer ... [ 0.529934] ... lapic delta = 6253525 [ 0.530787] ... PM-Timer delta = 358151 [ 0.531629] ... PM-Timer result ok [ 0.532437] ..... delta 6253525 [ 0.533162] ..... mult: 268586853 [ 0.533949] ..... calibration result: 10005640 [ 0.534903] ..... CPU clock speed is 2927.9241 MHz. [ 0.535957] ..... host bus clock speed is 1000.5640 MHz. [ 0.538012] devtmpfs: initialized [ 0.552493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.555148] xor: measuring software checksum speed [ 0.647208] prefetch64-sse: 10381.600 MB/sec [ 0.747266] generic_sse: 9382.800 MB/sec [ 0.748205] xor: using function: prefetch64-sse (10381.600 MB/sec) [ 0.749483] prandom: seed boundary self test passed [ 0.753378] prandom: 100 self tests passed [ 0.756242] regulator-dummy: no parameters [ 0.758875] NET: Registered protocol family 16 [ 0.764747] cpuidle: using governor menu [ 0.767670] ACPI: bus type PCI registered [ 0.769677] PCI: Using configuration type 1 for base access [ 0.857961] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.027424] raid6: sse2x1 gen() 2162 MB/s [ 1.197525] raid6: sse2x1 xor() 2377 MB/s [ 1.367625] raid6: sse2x2 gen() 5224 MB/s [ 1.537716] raid6: sse2x2 xor() 3899 MB/s [ 1.707816] raid6: sse2x4 gen() 6913 MB/s [ 1.877905] raid6: sse2x4 xor() 4793 MB/s [ 1.878851] raid6: using algorithm sse2x4 gen() 6913 MB/s [ 1.879830] raid6: .... xor() 4793 MB/s, rmw enabled [ 1.880715] raid6: using ssse3x2 recovery algorithm [ 1.881998] ACPI: Added _OSI(Module Device) [ 1.882735] ACPI: Added _OSI(Processor Device) [ 1.883504] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.884350] ACPI: Added _OSI(Processor Aggregator Device) [ 1.917286] ACPI: Interpreter enabled [ 1.918130] ACPI: (supports S0 S3 S5) [ 1.918779] ACPI: Using IOAPIC for interrupt routing [ 1.919820] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.038684] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.039661] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 2.040900] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 2.043218] PCI host bridge to bus 0000:00 [ 2.043930] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.044997] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.046023] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.047272] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window] [ 2.048494] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.049430] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 2.054332] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 2.059385] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 2.064925] pci 0000:00:01.1: reg 0x20: [io 0xc0c0-0xc0cf] [ 2.067767] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.068852] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.069866] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.071428] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.075943] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 2.077307] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 2.078532] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 2.083309] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 [ 2.085939] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref] [ 2.090074] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff] [ 2.098503] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 2.103338] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 2.105776] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 2.109068] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 2.120869] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 2.126197] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 2.128766] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 2.132163] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 2.148695] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 2.152175] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 2.154685] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 2.170869] pci 0000:00:06.0: [8086:25ab] type 00 class 0x088000 [ 2.173029] pci 0000:00:06.0: reg 0x10: [mem 0xfebf3000-0xfebf300f] [ 2.185096] pci_bus 0000:00: on NUMA node 0 [ 2.197792] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 2.201910] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 2.206042] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 2.210189] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 2.212757] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 2.221976] ACPI: Enabled 16 GPEs in block 00 to 0F [ 2.228671] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 2.229873] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.231676] vgaarb: loaded [ 2.232303] vgaarb: bridge control possible 0000:00:02.0 [ 2.237824] SCSI subsystem initialized [ 2.238852] libata version 3.00 loaded. [ 2.240500] media: Linux media interface: v0.10 [ 2.241736] Linux video capture interface: v2.00 [ 2.245227] Advanced Linux Sound Architecture Driver Initialized. [ 2.246712] PCI: Using ACPI for IRQ routing [ 2.247619] PCI: pci_cache_line_size set to 64 bytes [ 2.248900] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 2.250163] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff] [ 2.255228] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 2.256835] clocksource: Switched to clocksource kvm-clock [ 2.259384] FS-Cache: Loaded [ 2.260753] CacheFiles: Loaded [ 2.262077] pnp: PnP ACPI init [ 2.263815] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.276498] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.278617] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 2.280561] pnp 00:03: [dma 2] [ 2.281937] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 2.284829] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 2.287352] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.296759] pnp: PnP ACPI: found 6 devices [ 2.347228] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.349729] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.350963] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.352281] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.353674] pci_bus 0000:00: resource 7 [mem 0x14000000-0xfebfffff window] [ 2.355217] NET: Registered protocol family 1 [ 2.356198] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 2.357375] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 2.358625] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 2.359847] pci 0000:00:02.0: Video device with shadowed ROM [ 2.361015] PCI: CLS 0 bytes, default 64 [ 2.362438] Unpacking initramfs... [ 3.658123] Freeing initrd memory: 5336K (ffff880013aaa000 - ffff880013fe0000) [ 3.679017] PCLMULQDQ-NI instructions are not detected. [ 3.680472] AVX or AES-NI instructions are not detected. [ 3.681440] CPU feature 'AVX registers' is not supported. [ 3.682378] CPU feature 'AVX registers' is not supported. [ 3.683354] CPU feature 'AVX registers' is not supported. [ 3.684346] CPU feature 'AVX registers' is not supported. [ 3.685301] AVX2 or AES-NI instructions are not detected. [ 3.686860] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 3.689766] spin_lock-torture: Creating torture_shuffle task [ 3.690994] spin_lock-torture: Creating torture_stutter task [ 3.692110] spin_lock-torture: torture_shuffle task started [ 3.693166] spin_lock-torture: Creating lock_torture_writer task [ 3.694340] spin_lock-torture: torture_stutter task started [ 3.695412] spin_lock-torture: Creating lock_torture_writer task [ 3.696575] spin_lock-torture: lock_torture_writer task started [ 3.697703] spin_lock-torture: Creating lock_torture_stats task [ 3.698861] spin_lock-torture: lock_torture_writer task started [ 3.703004] futex hash table entries: 256 (order: 2, 24576 bytes) [ 3.705822] Initialise system trusted keyring [ 3.706906] spin_lock-torture: lock_torture_stats task started [ 3.850458] zbud: loaded [ 3.892626] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.925699] ntfs: driver 2.1.32 [Flags: R/W DEBUG]. [ 3.934685] efs: 1.0a - http://aeschi.ch.eu.org/efs/ [ 3.938939] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 3.942963] qnx6: QNX6 filesystem 1.0.0 registered. [ 3.946077] fuse init (API version 7.24) [ 3.955028] JFS: nTxBlock = 1748, nTxLock = 13990 [ 3.958014] SGI XFS with ACLs, security attributes, debug enabled [ 3.988413] befs: version: 0.9.3 [ 4.041846] async_tx: api initialized (async) [ 4.044531] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.045956] io scheduler noop registered (default) [ 4.046838] io scheduler deadline registered [ 4.047654] start plist test [ 4.057259] end plist test [ 4.057955] test_string_helpers: Running tests... [ 4.063179] test_string_helpers: Test 'test_string_get_size_one' failed! [ 4.064431] test_string_helpers: string_get_size(size = 8192, blk_size = 4096, units = 0 [ 4.065907] test_string_helpers: expected: '32.7 MB', got '33.6 MB' [ 4.071404] test_hexdump: all 1184 tests passed [ 4.072656] xz_dec_test: module loaded [ 4.073360] xz_dec_test: Create a device node with 'mknod xz_dec_test c 251 0' and write .xz files to it. [ 4.075296] glob: 64 self-tests passed, 0 failed [ 4.076156] rbtree testing -> 76207 cycles [ 6.818872] augmented rbtree testing -> 113152 cycles [ 10.940725] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2e6a714ac, max_idle_ns: 440795306413 ns [ 10.950397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.951766] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 10.953118] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 10.954782] cpcihp_generic: not configured, disabling. [ 10.958094] cr_bllcd: INTEL CARILLO RANCH LPC not found. [ 10.959215] cr_bllcd: Carillo Ranch Backlight Driver Initialized. [ 10.964033] vmlfb: initializing [ 10.966015] hgafb: HGA card not detected. [ 10.966909] hgafb: probe of hgafb.0 failed with error -22 [ 10.969787] ipmi message handler version 39.2 [ 10.970746] ipmi device interface [ 10.971814] IPMI System Interface driver. [ 10.973274] ipmi_si: Unable to find any System Interface(s) [ 10.974401] IPMI Watchdog: driver initialized [ 10.975366] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 10.978826] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 10.980484] ACPI: Power Button [PWRF] [ 14.143150] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 14.144399] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver [ 20.364738] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 20.366055] virtio-pci 0000:00:05.0: virtio_pci: leaving for legacy driver [ 23.435906] HDLC line discipline maxframe=4096 [ 23.437992] N_HDLC line discipline registered. [ 23.438730] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 23.439570] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 23.464175] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 23.477598] Cyclades driver 2.6 [ 23.478831] RocketPort device driver module, version 2.09, 12-June-2003 [ 23.480257] No rocketport ports found; unloading driver [ 23.481342] SyncLink GT [ 23.481976] SyncLink GT, tty major#245 [ 23.482947] SyncLink GT no devices found [ 23.483798] SyncLink serial driver $Revision: 4.38 $ [ 23.540440] SyncLink serial driver $Revision: 4.38 $, tty major#244 [ 23.542693] Non-volatile memory driver v1.3 [ 23.544702] smapi::smapi_init, ERROR invalid usSmapiID [ 23.545823] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 23.547800] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 23.549410] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 23.550995] SyncLink PC Card driver $Revision: 4.34 $, tty major#243 [ 23.552575] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 23.557279] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 23.559153] lkdtm: No crash points registered, enable through debugfs [ 23.561048] Phantom Linux Driver, version n0.9.8, init OK [ 23.563790] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 23.566292] c2port c2port0: C2 port uc added [ 23.567227] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 23.570029] Guest personality initialized and is inactive [ 23.571771] VMCI host device registered (name=vmci, major=10, minor=61) [ 23.572986] Initialized host personality [ 23.578365] Uniform Multi-Platform E-IDE driver [ 23.584383] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 23.587211] rdac: device handler registered [ 23.588441] hp_sw: device handler registered [ 23.589395] emc: device handler registered [ 23.590348] alua: device handler registered [ 23.591250] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 23.592840] osst :I: Tape driver with OnStream support version 0.99.4 [ 23.592840] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 23.595974] SCSI Media Changer driver v0.25 [ 23.597536] osd: LOADED open-osd 0.2.1 [ 23.614968] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 23.620591] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 23.622168] device id = 2440 [ 23.622860] device id = 2480 [ 23.623535] device id = 24c0 [ 23.624222] device id = 24d0 [ 23.624931] device id = 25a1 [ 23.625616] device id = 2670 [ 23.627107] slram: not enough parameters. [ 23.630944] ftl_cs: FTL header not found. [ 23.668910] No valid DiskOnChip devices found [ 23.670101] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 23.672019] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 23.673915] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 23.675758] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 23.677550] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 23.679338] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 23.681186] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39 [ 23.682389] nand: Toshiba NAND 128MiB 1,8V 8-bit [ 23.683334] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16 [ 23.685021] flash size: 128 MiB [ 23.685769] page size: 512 bytes [ 23.686528] OOB area size: 16 bytes [ 23.687321] sector size: 16 KiB [ 23.688050] pages number: 262144 [ 23.688814] pages per sector: 32 [ 23.703449] bus width: 8 [ 23.704053] bits in sector size: 14 [ 23.704811] bits in page size: 9 [ 23.705540] bits in OOB size: 4 [ 23.706247] flash size with OOB: 135168 KiB [ 23.707104] page address bytes: 4 [ 23.707842] sector address bytes: 3 [ 23.708596] options: 0x42 [ 23.714652] Scanning device for bad blocks [ 23.814241] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 23.815307] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 23.818767] ftl_cs: FTL header not found. [ 23.822464] Fusion MPT base driver 3.04.20 [ 23.823161] Copyright (c) 1999-2008 LSI Corporation [ 23.824032] Fusion MPT SPI Host driver 3.04.20 [ 23.824965] Fusion MPT misc device (ioctl) driver 3.04.20 [ 23.826354] mptctl: Registered with Fusion MPT base driver [ 23.827229] mptctl: /dev/mptctl @ (major,minor=10,220) [ 23.829674] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 23.832388] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.833205] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.837675] mousedev: PS/2 mouse device common for all mice [ 23.839060] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 23.842570] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 23.846611] mk712: device not present [ 23.850247] i2c-parport: adapter type unspecified [ 23.851086] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 23.852863] i2c-parport-light: adapter type unspecified [ 23.853817] Marvell M88ALP01 'CAFE' Camera Controller version 2 [ 23.855352] Driver for 1-wire Dallas network protocol. [ 23.856575] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 23.857697] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 23.859502] __power_supply_register: Expected proper parent device for 'test_ac' [ 23.861300] power_supply test_ac: uevent [ 23.861957] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 23.862854] __power_supply_register: Expected proper parent device for 'test_battery' [ 23.864977] power_supply test_battery: uevent [ 23.865681] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 23.867821] __power_supply_register: Expected proper parent device for 'test_usb' [ 23.869538] power_supply test_usb: uevent [ 23.870202] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 23.871118] power_supply test_battery: power_supply_changed [ 23.872062] power_supply test_ac: power_supply_changed [ 23.872895] power_supply test_battery: power_supply_changed_work [ 23.873803] power_supply test_battery: power_supply_update_bat_leds 2 [ 23.874817] power_supply test_battery: uevent [ 23.875525] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 23.876493] power_supply test_battery: prop STATUS=Discharging [ 23.877396] power_supply test_battery: prop CHARGE_TYPE=Fast [ 23.878301] power_supply test_battery: prop HEALTH=Good [ 23.879117] power_supply test_battery: prop PRESENT=1 [ 23.879921] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 23.890328] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 23.891322] power_supply test_battery: prop CHARGE_FULL=100 [ 23.892185] power_supply test_battery: prop CHARGE_NOW=50 [ 23.893033] power_supply test_battery: prop CAPACITY=50 [ 23.893857] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 23.894793] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 23.895762] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 23.896690] power_supply test_battery: prop MODEL_NAME=Test battery [ 23.897637] power_supply test_battery: prop MANUFACTURER=Linux [ 23.898529] power_supply test_battery: prop SERIAL_NUMBER=4.5.0-rc1 [ 23.899513] power_supply test_battery: prop TEMP=26 [ 23.903892] sdhci: Secure Digital Host Controller Interface driver [ 23.904819] sdhci: Copyright(c) Pierre Ossman [ 23.905760] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 23.906682] wbsd: Copyright(c) Pierre Ossman [ 23.908245] sdhci-pltfm: SDHCI platform and OF driver helper [ 23.909190] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 23.910079] power_supply test_ac: power_supply_changed_work [ 23.910974] power_supply test_ac: power_supply_update_gen_leds 1 [ 23.912032] power_supply test_ac: uevent [ 23.912693] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 23.913584] power_supply test_ac: prop ONLINE=1 [ 23.914338] power_supply test_usb: power_supply_changed [ 23.915144] power_supply test_usb: power_supply_changed_work [ 23.916021] power_supply test_usb: power_supply_update_gen_leds 1 [ 23.916943] power_supply test_usb: uevent [ 23.917608] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 23.918477] power_supply test_usb: prop ONLINE=1 [ 23.921463] leds_ss4200: no LED devices found [ 23.923560] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 23.925029] hidraw: raw HID events driver (C) Jiri Kosina [ 23.932124] panel: driver version 0.9.5 not yet registered [ 23.933752] no options. [ 23.935286] input: Speakup as /devices/virtual/input/input3 [ 23.936625] evbug: Connected device: input3 (Speakup at speakup/input0) [ 23.938722] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 23.939807] speakup 3.1.6: initialized [ 23.940466] synth name on entry is: (null) [ 23.941179] FPGA DOWNLOAD ---> [ 23.941740] FPGA image file name: xlinx_fpga_firmware.bit [ 23.943001] GPIO INIT FAIL!! [ 23.955887] fake-fmc-carrier: mezzanine 0 [ 23.956594] Manufacturer: fake-vendor [ 23.957296] Product name: fake-design-for-testing [ 23.958461] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 23.959629] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95 [ 23.961041] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 23.962132] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 23.974639] microcode: CPU0 sig=0x106a3, pf=0x1, revision=0x1 [ 23.976129] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 23.977625] ... APIC ID: 00000000 (0) [ 23.978346] ... APIC VERSION: 01050014 [ 23.978992] 0000000000000000000000000000000000000000000000000000000000000000 [ 23.980651] 0000000000000000000000000000000000000000000000000000000000000000 [ 23.982256] 0000000000000000000000000000000000000000000000000000000000008000 [ 23.983912] [ 23.984307] number of MP IRQ sources: 15. [ 23.984979] number of IO-APIC #0 registers: 24. [ 23.985714] testing the IO APIC....................... [ 23.986539] IO APIC #0...... [ 23.987068] .... register #00: 00000000 [ 23.987722] ....... : physical APIC id: 00 [ 23.988433] ....... : Delivery Type: 0 [ 23.989095] ....... : LTS : 0 [ 23.989769] .... register #01: 00170011 [ 23.990426] ....... : max redirection entries: 17 [ 23.991221] ....... : PRQ implemented: 0 [ 23.991927] ....... : IO APIC version: 11 [ 23.992640] .... register #02: 00000000 [ 23.993294] ....... : arbitration: 00 [ 23.993963] .... IRQ redirection table: [ 23.994629] IOAPIC 0: [ 23.995105] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 23.996372] pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1) [ 23.997624] pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1) [ 23.998873] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.000144] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.001409] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.002671] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.003930] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.005197] pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.006454] pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1) [ 24.007736] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.009009] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.010287] pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1) [ 24.011563] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.012828] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.014084] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.015357] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.016615] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.017866] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.019137] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.020405] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.021660] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.033158] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.034423] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 24.035674] IRQ to pin mappings: [ 24.036250] IRQ0 -> 0:2 [ 24.036867] IRQ1 -> 0:1 [ 24.037485] IRQ3 -> 0:3 [ 24.038100] IRQ4 -> 0:4 [ 24.038716] IRQ5 -> 0:5 [ 24.039333] IRQ6 -> 0:6 [ 24.039945] IRQ7 -> 0:7 [ 24.040570] IRQ8 -> 0:8 [ 24.041187] IRQ9 -> 0:9 [ 24.041807] IRQ10 -> 0:10 [ 24.042444] IRQ11 -> 0:11 [ 24.043078] IRQ12 -> 0:12 [ 24.043716] IRQ13 -> 0:13 [ 24.044353] IRQ14 -> 0:14 [ 24.044988] IRQ15 -> 0:15 [ 24.045634] .................................... done. [ 24.048391] Loading compiled-in X.509 certificates [ 24.049226] page_owner is disabled [ 24.050853] Key type encrypted registered [ 24.060709] ALSA device list: [ 24.061276] No soundcards found. [ 24.064003] Freeing unused kernel memory: 1092K (ffffffff87a19000 - ffffffff87b2a000) [ 24.288684] power_supply test_ac: uevent [ 24.289462] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 24.290376] power_supply test_ac: prop ONLINE=1 [ 24.297401] power_supply test_battery: uevent [ 24.298138] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 24.299156] power_supply test_battery: prop STATUS=Discharging [ 24.300074] power_supply test_battery: prop CHARGE_TYPE=Fast [ 24.303341] power_supply test_battery: prop HEALTH=Good [ 24.304186] power_supply test_battery: prop PRESENT=1 [ 24.305032] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 24.305972] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 24.306959] power_supply test_battery: prop CHARGE_FULL=100 [ 24.307874] power_supply test_battery: prop CHARGE_NOW=50 [ 24.308733] power_supply test_battery: prop CAPACITY=50 [ 24.309566] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 24.310505] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 24.320572] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 24.321548] power_supply test_battery: prop MODEL_NAME=Test battery [ 24.322569] power_supply test_battery: prop MANUFACTURER=Linux [ 24.323508] power_supply test_battery: prop SERIAL_NUMBER=4.5.0-rc1 [ 24.324469] power_supply test_battery: prop TEMP=26 [ 24.325265] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 24.326309] power_supply test_usb: uevent [ 24.326988] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 24.327887] power_supply test_usb: prop ONLINE=1 [ 24.790331] power_supply test_ac: uevent [ 24.791924] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 24.810511] power_supply test_ac: prop ONLINE=1 [ 24.811931] power_supply test_ac: uevent [ 24.812619] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 24.813497] power_supply test_ac: prop ONLINE=1 [ 24.816073] power_supply test_battery: uevent [ 24.816809] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 24.817838] power_supply test_battery: prop STATUS=Discharging [ 24.818750] power_supply test_battery: prop CHARGE_TYPE=Fast [ 24.819639] power_supply test_battery: prop HEALTH=Good [ 24.820522] power_supply test_battery: prop PRESENT=1 [ 24.839444] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 24.840380] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 24.845397] power_supply test_battery: prop CHARGE_FULL=100 [ 24.846360] power_supply test_battery: prop CHARGE_NOW=50 [ 24.847208] power_supply test_battery: prop CAPACITY=50 [ 24.848096] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 24.849088] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 24.850036] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 24.858566] power_supply test_battery: prop MODEL_NAME=Test battery [ 24.859550] power_supply test_battery: prop MANUFACTURER=Linux [ 24.860462] power_supply test_battery: prop SERIAL_NUMBER=4.5.0-rc1 [ 24.865606] power_supply test_battery: prop TEMP=26 [ 24.866419] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 24.867866] power_supply test_battery: uevent [ 24.868598] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 24.869634] power_supply test_battery: prop STATUS=Discharging [ 24.870545] power_supply test_battery: prop CHARGE_TYPE=Fast [ 24.871464] power_supply test_battery: prop HEALTH=Good [ 24.872311] power_supply test_battery: prop PRESENT=1 [ 24.873120] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 24.874065] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 24.875012] power_supply test_battery: prop CHARGE_FULL=100 [ 24.875897] power_supply test_battery: prop CHARGE_NOW=50 [ 24.876801] power_supply test_battery: prop CAPACITY=50 [ 24.877687] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 24.878673] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 24.879619] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 24.880557] power_supply test_battery: prop MODEL_NAME=Test battery [ 24.885607] power_supply test_usb: uevent [ 24.886386] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 24.887342] power_supply test_usb: prop ONLINE=1 [ 24.888650] power_supply test_usb: uevent [ 24.889395] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 24.890294] power_supply test_usb: prop ONLINE=1 [ 24.966155] power_supply test_battery: prop MANUFACTURER=Linux [ 24.967121] power_supply test_battery: prop SERIAL_NUMBER=4.5.0-rc1 [ 24.968111] power_supply test_battery: prop TEMP=26 [ 24.968948] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 25.024792] logger[336] vsyscall attempted with vsyscall=none ip:ffffffffff600400 cs:33 sp:7ffce002c818 ax:ffffffffff600400 si:7fd3e4d2da4c di:7ffce002c8d8 [ 25.026875] logger[336]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007ffce002c818 error 15 [ 25.055110] logger[337] vsyscall attempted with vsyscall=none ip:ffffffffff600400 cs:33 sp:7ffc68a68ad8 ax:ffffffffff600400 si:7f2178802a4c di:7ffc68a68b98 [ 25.057136] logger[337]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007ffc68a68ad8 error 15 [ 25.343479] init[1] vsyscall attempted with vsyscall=none ip:ffffffffff600400 cs:33 sp:7ffcea58b9d8 ax:ffffffffff600400 si:7ffcea58b920 di:7ffcea58bb10 [ 25.345483] init[1]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007ffcea58b9d8 error 15 [ 25.347010] init[1] vsyscall attempted with vsyscall=none ip:ffffffffff600400 cs:33 sp:7ffcea58aff8 ax:ffffffffff600400 si:7ff74f460a4c di:7ffcea58b0b8 [ 25.349021] init[1]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007ffcea58aff8 error 15 [ 25.350973] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 25.350973] [ 25.352529] CPU: 0 PID: 1 Comm: init Not tainted 4.5.0-rc1 #6 [ 25.353415] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 25.354863] ffff88000fd0fbd0 ffff88000fcffac0 ffffffff860c2cd9 ffff88000fcffb88 [ 25.356393] ffffffff85babc08 0000000041b58ab3 ffffffff871476ce ffffffff85bababd [ 25.357862] 0000000000000000 0000000000000010 ffff88000fcffb98 ffff88000fcffb30 [ 25.359385] Call Trace: [ 25.359874] [] dump_stack+0x19/0x20 [ 25.360731] [] panic+0x14b/0x29d [ 25.361510] [] ? phys_to_pfn_t+0x1d/0x1d [ 25.362376] [] ? do_exit+0x5a1/0x11d0 [ 25.363204] [] do_exit+0x11cd/0x11d0 [ 25.364037] [] ? mm_update_next_owner+0x310/0x310 [ 25.365042] [] do_group_exit+0x71/0x140 [ 25.365950] [] get_signal+0x2a5/0x880 [ 25.366776] [] do_signal+0x88/0x9c0 [ 25.367618] [] ? is_prefetch+0x240/0x240 [ 25.368632] [] ? printk+0x93/0xaf [ 25.369480] [] ? setup_sigcontext+0x270/0x270 [ 25.370395] [] ? up_read+0x1a/0x40 [ 25.371192] [] ? printk+0x93/0xaf [ 25.371980] [] ? bad_area_nosemaphore+0xe/0x10 [ 25.372908] [] ? __do_page_fault+0x91/0x4e0 [ 25.373808] [] exit_to_usermode_loop+0xcd/0xf0 [ 25.374733] [] prepare_exit_to_usermode+0x48/0x60 [ 25.375695] [] retint_user+0x8/0x13 [ 25.376580] Kernel Offset: 0x4a00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Elapsed time: 30 qemu-system-x86_64 -enable-kvm -cpu Nehalem -kernel /pkg/linux/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/vmlinuz-4.5.0-rc1 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-yocto-x86_64-10/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s2-01260945-92e963f50fc74041b5e9e744c330dca48e04f08d-20160126-121160-1yr2cmc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s2-01260945 branch=linus/master commit=92e963f50fc74041b5e9e744c330dca48e04f08d BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/vmlinuz-4.5.0-rc1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s2-01260945/gcc-5/92e963f50fc74041b5e9e744c330dca48e04f08d/5 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-yocto-x86_64-10::dhcp drbd.minor_count=8' -initrd /fs/KVM/initrd-vm-intel12-yocto-x86_64-10 -m 320 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/KVM/disk0-vm-intel12-yocto-x86_64-10,media=disk,if=virtio -drive file=/fs/KVM/disk1-vm-intel12-yocto-x86_64-10,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-intel12-yocto-x86_64-10 -serial file:/dev/shm/kboot/serial-vm-intel12-yocto-x86_64-10 -daemonize -display none -monitor null