"Zheng, Lv" <lv.zheng(a)intel.com> writes:
Hi,
Can I have the acpidump output of the tested platform?
It's not a special machine, just a qemu virtual machine, with qemu
command line as below.
Best Regards,
Huang, Ying
Thanks
-Lv
> -----Original Message-----
> From: kernel test robot [mailto:ying.huang@linux.intel.com]
> Sent: Monday, March 28, 2016 2:11 PM
> To: Zheng, Lv <lv.zheng(a)intel.com>
> Cc: lkp(a)01.org
> Subject: [lkp] [ACPICA] d985a6cc1f:
> kmsg.ACPI_Warning:Could_not_enable_fixed_event-
> RealTimeClock(#)(#/evxface-#)
>
> FYI, we noticed the below changes on
>
>
git://bee.sh.intel.com/git/zetalog/linux-acpica.git acpica-access
> commit d985a6cc1f86d0b4e719be846f24b1eac2f33395 ("ACPICA: Hardware:
> Add access_width/bit_offset support in acpi_hw_read()")
>
> [ 1.381329] ACPI Error: Could not enable PowerButton event
> (20160108/evxfevnt-212)
> [ 1.383284] ACPI Warning: Could not enable fixed event - PowerButton (2)
> (20160108/evxface-654)
>
>
> FYI, raw QEMU command line is:
>
> qemu-system-x86_64 -enable-kvm -cpu Westmere -kernel
> /pkg/linux/x86_64-rhel/gcc-
> 4.9/d985a6cc1f86d0b4e719be846f24b1eac2f33395/vmlinuz-4.5.0-rc7-00190-
> gd985a6c -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-
> yocto-ia32-6/bisect_boot-1-yocto-minimal-i386.cgz-x86_64-rhel-
> d985a6cc1f86d0b4e719be846f24b1eac2f33395-20160325-57289-ryboi2-
> 0.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=internal-devel/devel-hourly-
> 2016032223-internal commit=d985a6cc1f86d0b4e719be846f24b1eac2f33395
> BOOT_IMAGE=/pkg/linux/x86_64-rhel/gcc-
> 4.9/d985a6cc1f86d0b4e719be846f24b1eac2f33395/vmlinuz-4.5.0-rc7-00190-
> gd985a6c max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-
> ia32/yocto-minimal-i386.cgz/x86_64-rhel/gcc-
> 4.9/d985a6cc1f86d0b4e719be846f24b1eac2f33395/0 LKP_SERVER=inn
> earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug
> sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1
> softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2
> prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
> ip=::::vm-kbuild-yocto-ia32-6::dhcp drbd.minor_count=8' -initrd
> /fs/sde1/initrd-vm-kbuild-yocto-ia32-6 -m 320 -smp 1 -device
> e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog
> i6300esb -rtc base=localtime -drive file=/fs/sde1/disk0-vm-kbuild-yocto-ia32-
> 6,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-ia32-6 -
> serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-ia32-6 -daemonize -display
> none -monitor null
>
>
>
>
> Thanks,
> Huang Ying
_______________________________________________
LKP mailing list
LKP(a)lists.01.org
https://lists.01.org/mailman/listinfo/lkp