Telit HE910: CMER command problem
by Ming Li Wu
Hello,
I am using Telit HE910 modem,
After sending AT+CMER=3,0,0,2 I always got "sim card is busy".
The followoing is the part of log:
ofonod[446]: Aux: > AT+CMER=3,0,0,2\r
ofonod[446]: Aux: < \r\n+CME ERROR: 14\r\n
ofonod[446]: +CMER not supported by this modem. If this is an error
please submit patches to support this hardware
My question is :
How important is this command.?
I mean what the worst consequence will be if I just ignore this error
message,
Thanks!
Mingli
9 years, 8 months
- 2
- 1
Telit HE910 modem --- unable be put on line by Connman
by Ming Li Wu
Hello,
I am working on Telit HE910 modem.
I am using ofono 1.11, and the commit is
6e3a6156b34c52bde253b097976d0ba9dd575879.
For the Telit modem, "AT+CFUN=4" is used to enable
the modem. According to "Telit He910 AT Commands
Reference Guide", "issuing AT+CFUN=4[,0] actually
causes the module to perform either a network
deregistration and a SIM deactivation."
After this command is sent out, an unsolicited indication
"\r\n#QSS: 0\r\n" is received by of ofono. This means that
the sim card cannot be detected by the modem. It turns out
that Connman will not put the modem on line.
if "AT+CFUN=5" was used, it worked fine.
My questions are:
1. Why is "AT+CFUN=4" used to enable the modem, instead of "AT+CFUN=1"
or "AT+CFUN=5"?
2. If "AT+CFUN=4" is reasonable, are there any solutions to solve this
problem?
Thanks!
Mingli
The following is the log when "AT+CFUN=4" was used.
ofonod[358]: plugins/udevng.c:setup_telit() modem=/dev/ttyACM0
aux=/dev/ttyACM3 gps=(null) diag=/dev/ttyACM1
ofonod[358]: src/modem.c:set_modem_property() modem 0x1152008 property
Modem
ofonod[358]: src/modem.c:set_modem_property() modem 0x1152008 property Aux
ofonod[358]: src/modem.c:set_modem_property() modem 0x1152008 property Diag
ofonod[358]: src/modem.c:ofono_modem_register() 0x1152008
ofonod[358]: plugins/telit.c:telit_probe() 0x1152008
ofonod[358]: src/modem.c:emit_modem_added() 0x1152008
ofonod[358]: src/modem.c:call_modemwatches() 0x1152008 added:1
ofonod[358]: plugins/hfp_ag.c:modem_watch() modem: 0x1152008, added: 1
ofonod[358]: plugins/dun_gw.c:modem_watch() modem: 0x1152008, added: 1
ofonod[358]: plugins/smart-messaging.c:modem_watch() modem: 0x1152008,
added: 1
ofonod[358]: plugins/push-notification.c:modem_watch() modem: 0x1152008,
added: 1
ofonod[358]: plugins/telit.c:telit_enable() 0x1152008
ofonod[358]: src/modem.c:get_modem_property() modem 0x1152008 property
Modem
ofonod[358]: plugins/telit.c:open_device() Modem /dev/ttyACM0
ofonod[358]: src/modem.c:get_modem_property() modem 0x1152008 property Aux
ofonod[358]: plugins/telit.c:open_device() Aux /dev/ttyACM3
ofonod[358]: Aux: > ATE0 +CMEE=1\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT#QSS=0\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT+CFUN=4\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: plugins/telit.c:cfun_enable_cb() 0x1152008
ofonod[358]: src/modem.c:modem_change_state() old state: 0, new state: 1
ofonod[358]: plugins/telit.c:telit_pre_sim() 0x1152008
ofonod[358]: Aux: > AT&C0\r
ofonod[358]: src/sim.c:ofono_sim_add_state_watch() 0x1153d30
ofonod[358]: src/sim.c:ofono_sim_add_state_watch() 0x1153d30
ofonod[358]: src/sim.c:ofono_sim_add_state_watch() 0x1153d30
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT+GCAP\r
ofonod[358]: Aux: < \r\n+GCAP: +CGSM,+DS,+FCLASS,+MS,+ES\r\n\r\nOK\r\n
ofonod[358]: Aux: > AT+CRC=1\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT+CLIP=1\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT+CDIP=1\r
ofonod[358]: Aux: < \r\nERROR\r\n
ofonod[358]: Aux: > AT+CNAP=1\r
ofonod[358]: Aux: < \r\nERROR\r\n
ofonod[358]: Aux: > AT+COLP=1\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT+CSSN=1,1\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT+VTD?\r
ofonod[358]: Aux: < \r\n0\r\n\r\nOK\r\n
ofonod[358]: Aux: > AT+CCWA=1\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: drivers/atmodem/voicecall.c:at_voicecall_initialized()
voicecall_init: registering to notifications
ofonod[358]: src/sim.c:ofono_sim_add_state_watch() 0x1153d30
ofonod[358]: Aux: > AT#AUTOATT=0\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT#QSS=2\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT+CGMI\r
ofonod[358]: Aux: < \r\nTelit\r\n\r\nOK\r\n
ofonod[358]: Aux: > AT+CLCC\r
ofonod[358]: Aux: < \r\nOK\r\n
ofonod[358]: Aux: > AT+CGMM\r
ofonod[358]: Aux: < \r\nHE910\r\n\r\nOK\r\n
ofonod[358]: Aux: > AT+CGMR\r
ofonod[358]: Aux: < \r\n12.00.003\r\n\r\nOK\r\n
ofonod[358]: Aux: > AT+CGSN\r
ofonod[358]: Aux: < \r\n357164040533674\r\n\r\nOK\r\n
ofonod[358]: Aux: < \r\n#QSS: 0\r\n
ofonod[358]: plugins/telit.c:telit_qss_notify() 0x1152008
ofonod[358]: plugins/telit.c:switch_sim_state_status() 0x1152008, SIM
status: 0
--
Mingli Wu South Pole AB
Phone: +46 8 56237100 Anderstorpsvägen 16
Mobile: +46 73 7628460 SE - 171 54 Solna
e-mail: mingli(a)southpole.se www.southpole.se
9 years, 8 months
- 4
- 6