Re: Problem with SIM lock states not showing correctly in Ofono API.
Hi Jussi,
On 02/21/2011 03:46 AM, Jussi Kangas wrote:
Hi,
On Fri, 2011-02-18 at 19:29 +0200, Denis Kenzior wrote:
> I have pushed experimental patch
> e8553f53376a33504dd18c4d7bb6d6f309973e0a to take care of this. Let me
> know if this works for you.
>
> Regards,
> -Denis
It seems to be showing the states correctly except in case when you make
PIN2 blocked using call meter API. If PIN2 goes blocked when using
callmeter nothing is shown in API. (My patch did not do that either.
Plan was to fix it in separate patch)
Please do. Most modems do not support PIN2 entry via CPIN, and
implement this using a vendor extension. PIN2 / PUK2 support seems to
be a rather recent addition to the specs.
Another issue is that your patch brings the API:s down when PIN2
goes
blocked. ( using ChangePin ) That is not correct. Blocked PIN2 does not
force phone to drop from network and it does prevent the usage of SIM.
If your modem reports the PIN2 in CPIN, then yes that is a bug.
There seems to be also some problem when API shows PUK2 required and
PIN
and PIN2 locked. Reset-pin opens the PUK2 but API does not get the
response it's looking for and oFono needs to be booted before states are
showed correctly again. I suspect that's a separate issue however and
not caused by this patch.
I'm having trouble visualizing this one. Can you provide an AT debug
log to illustrate?
Regards,
-Denis