11:12 p.m.
Hi together,
I have a setup where I want to use a M2M simcard from Telefonica issued in Germany. I have
verified with a technician from Telefonica that the MCC/MNC's (262 | 03, 07,77) and
the APN (iotde.telefonica.com) are correct and have configured oFono to use those and the
network registartion props show that 262 | 03 seems to be actually used. However, the IMSI
shows that the SIM card has the MCC and MNC registered for Movistar (Telefonica) Spain
(214 | 07).
The problem is that the ConnectionContext does not seem to be able to get or register the
correct APN and the device is not able to get connection. I have appended some printouts
of the different properties.
Does anyone has an idea if I need to configure something additionaly or how to fix this
problem?
HardwarePosition:internal
Powered:1
Online:1
Manufacturer:QUALCOMM INCORPORATED
Model:QUECTEL Mobile Broadband Module
Revision:EG25GGBR07A07M2G
[SimProps]
Present:1
CardIdentifier:8934076100150326600
SubscriberIdentity:214074307601315
LockedPins:dbus.Array([], signature=dbus.Signature('s'), variant_level=1)
PinRequired:none
[NetworkRegistrationProps]
Status:roaming
MobileCountryCode:262
MobileNetworkCode:03
Name:26203
Strength:40
Technology:lte
RSSI:None
[ConnectionManagerProperties]
Attached:1
RoamingAllowed:1
[ConnectionContexts]
[/quectelqmi_0/context1]
Name:Internet
Active:0
Type:internet
Protocol:ip
AccessPointName:
Username:
Password:
AuthenticationMethod:chap
11:20 p.m.
Hi,
On 7/5/21 3:12 PM, sebastian.wans(a)physec.de wrote:
Hi together,
I have a setup where I want to use a M2M simcard from Telefonica issued in Germany. I
have verified with a technician from Telefonica that the MCC/MNC's (262 | 03, 07,77)
and the APN (iotde.telefonica.com) are correct and have configured oFono to use those and
the network registartion props show that 262 | 03 seems to be actually used. However, the
IMSI shows that the SIM card has the MCC and MNC registered for Movistar (Telefonica)
Spain (214 | 07).
The problem is that the ConnectionContext does not seem to be able to get or register the
correct APN and the device is not able to get connection. I have appended some printouts
of the different properties.
Does anyone has an idea if I need to configure something additionaly or how to fix this
problem?
HardwarePosition:internal
Powered:1
Online:1
Manufacturer:QUALCOMM INCORPORATED
Model:QUECTEL Mobile Broadband Module
Revision:EG25GGBR07A07M2G
[SimProps]
Present:1
CardIdentifier:8934076100150326600
SubscriberIdentity:214074307601315
LockedPins:dbus.Array([], signature=dbus.Signature('s'), variant_level=1)
PinRequired:none
[NetworkRegistrationProps]
Status:roaming
MobileCountryCode:262
MobileNetworkCode:03
Name:26203
Strength:40
Technology:lte
RSSI:None
[ConnectionManagerProperties]
Attached:1
RoamingAllowed:1
[ConnectionContexts]
[/quectelqmi_0/context1]
Name:Internet
Active:0
Type:internet
Protocol:ip
AccessPointName:
Username:
Password:
AuthenticationMethod:chap
Your debug output makes me think you are using a kerlink board. Am I right?
If this is the case, your APN is badly configured. Please send
/etc/network/ofono/provisioning file, I'll have a look. Meanwhile, if
you have modified this file, you can try "/etc/init.d/ofono reset" to be
sure to use the latest version of this file.
_______________________________________________
ofono mailing list -- ofono(a)ofono.org
To unsubscribe send an email to ofono-leave(a)ofono.org
Best Regards,
Christophe Ronco
5:15 p.m.
Thanks for the quick response. Yes that is correct. I'm using a Kerlink iStation. I
have configured the provisioning file by adding the MCC/MNC and the APN as shown below.
This setup with adjusted parameters works for different providers without any problem but
I might have forgotten something here. I also rebooting, reseting, removing the
SIM-specific folders and so on to make sure I used the latest file but it hasn't
helped.
Best regards
[operator:262,03]
internet.AccessPointName=iotde.telefonica.com
# it's actually 05 and not 07 as mentioned in my first post
[operator:262,05]
internet.AccessPointName=iotde.telefonica.com
[operator:262,77]
internet.AccessPointName=iotde.telefonica.com
5:51 p.m.
Hi,
In provisioning file, you should use SIM card MCC/MNC and not MCC/MNC of
network operator.
Your SIM card MCC/MNC is 214,07. In provisionning file, you need:
[operator:214,07]
internet.AccessPointName=iotde.telefonica.com
As you already did, after modifying provisioning file, do
/etc/init.d/ofono reset to remove SIM-specific folders.
Best Regards,
Christophe
On 7/6/21 9:15 AM, sebastian.wans(a)physec.de wrote:
> Thanks for the quick response. Yes that is correct. I'm using a Kerlink iStation.
I have configured the provisioning file by adding the MCC/MNC and the APN as shown below.
This setup with adjusted parameters works for different providers without any problem but
I might have forgotten something here. I also rebooting, reseting, removing the
SIM-specific folders and so on to make sure I used the latest file but it hasn't
helped.
>
> Best regards
>
> [operator:262,03]
> internet.AccessPointName=iotde.telefonica.com
>
> # it's actually 05 and not 07 as mentioned in my first post
> [operator:262,05]
> internet.AccessPointName=iotde.telefonica.com
>
> [operator:262,77]
> internet.AccessPointName=iotde.telefonica.com
> _______________________________________________
> ofono mailing list -- ofono(a)ofono.org
> To unsubscribe send an email to ofono-leave(a)ofono.org
439
days inactive
440
days old
4 comments
2 participants
participants (2)
-
Christophe Ronco -
sebastian.wans＠physec.de