9:55 a.m.
The default location for DBus policy files should be
/usr/share/dbus-1/system.d and the corresponding directory under /etc
should be reserved for administrative changes to default/packaged
settings. This removes a dependency of ofono on a populated /etc.
---
configure.ac | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/configure.ac b/configure.ac
index f3148a40..79436adc 100644
--- a/configure.ac
+++ b/configure.ac
@@ -83,9 +83,9 @@ AC_SUBST(DBUS_LIBS)
AC_ARG_WITH(dbusconfdir, AC_HELP_STRING([--with-dbusconfdir=PATH],
[path to D-Bus config directory]), [path_dbusconf=${withval}],
- [path_dbusconf="`$PKG_CONFIG --variable=sysconfdir dbus-1`"])
+ [path_dbusconf="`$PKG_CONFIG --variable=datadir dbus-1`"])
if (test -z "${path_dbusconf}"); then
- DBUS_CONFDIR="${sysconfdir}/dbus-1/system.d"
+ DBUS_CONFDIR="${datadir}/dbus-1/system.d"
else
DBUS_CONFDIR="${path_dbusconf}/dbus-1/system.d"
fi
--
2.14.1
9:55 a.m.
New subject: [PATCH 2/4] xmm7modem: drop executable bit from C source file
---
drivers/xmm7modem/ims.c | 0
1 file changed, 0 insertions(+), 0 deletions(-)
mode change 100755 => 100644 drivers/xmm7modem/ims.c
diff --git a/drivers/xmm7modem/ims.c b/drivers/xmm7modem/ims.c
old mode 100755
new mode 100644
--
2.14.1
3:20 a.m.
New subject: [PATCH 2/4] xmm7modem: drop executable bit from C source file
Hi Jonas,
On 02/04/2018 04:55 PM, Jonas Bonn wrote:
---
drivers/xmm7modem/ims.c | 0
1 file changed, 0 insertions(+), 0 deletions(-)
mode change 100755 => 100644 drivers/xmm7modem/ims.c
Applied, thanks.
Regards,
-Denis
8:36 p.m.
New subject: [PATCH 2/4] xmm7modem: drop executable bit from C source file
On 02/05/2018 05:20 PM, Denis Kenzior wrote:
Hi Jonas,
On 02/04/2018 04:55 PM, Jonas Bonn wrote:
> ---
> drivers/xmm7modem/ims.c | 0
> 1 file changed, 0 insertions(+), 0 deletions(-)
> mode change 100755 => 100644 drivers/xmm7modem/ims.c
>
Applied, thanks.
What about the other three patches? Are they being silently rejected or
did they just fall off the radar?
In particular, patch 1/4 is important...
/Jonas
Regards,
-Denis
3:47 a.m.
New subject: [PATCH 2/4] xmm7modem: drop executable bit from C source file
Hi Jonas,
What about the other three patches? Are they being silently rejected
or
did they just fall off the radar?
In particular, patch 1/4 is important...
They're not ignored, but I'm not competent enough to review the build
system changes. They need to be acked by Marcel first who can be a bit
slow to respond.
Regards,
-Denis
9:55 a.m.
New subject: [PATCH 3/4] Remove unused threading support
Threads are not used anywhere within ofono so there's no point in having a
configure option to enable threading in GLib or DBus. I think this is mostly
a leftover from when ofono underwent mitosis from Connman...? :)
---
configure.ac | 8 --------
src/main.c | 12 ------------
tools/auto-enable.c | 12 ------------
tools/huawei-audio.c | 12 ------------
4 files changed, 44 deletions(-)
diff --git a/configure.ac b/configure.ac
index 79436adc..a22b0b11 100644
--- a/configure.ac
+++ b/configure.ac
@@ -68,14 +68,6 @@ PKG_CHECK_MODULES(GLIB, glib-2.0 >= 2.32, dummy=yes,
AC_SUBST(GLIB_CFLAGS)
AC_SUBST(GLIB_LIBS)
-if (test "${enable_threads}" = "yes"); then
- AC_DEFINE(NEED_THREADS, 1, [Define if threading support is required])
- PKG_CHECK_MODULES(GTHREAD, gthread-2.0 >= 2.16, dummy=yes,
- AC_MSG_ERROR(GThread >= 2.16 is required))
- GLIB_CFLAGS="$GLIB_CFLAGS $GTHREAD_CFLAGS"
- GLIB_LIBS="$GLIB_LIBS $GTHREAD_LIBS"
-fi
-
PKG_CHECK_MODULES(DBUS, dbus-1 >= 1.4, dummy=yes,
AC_MSG_ERROR(D-Bus >= 1.4 is required))
AC_SUBST(DBUS_CFLAGS)
diff --git a/src/main.c b/src/main.c
index 2d359dde..2c1b23a0 100644
--- a/src/main.c
+++ b/src/main.c
@@ -211,11 +211,6 @@ int main(int argc, char **argv)
struct ell_event_source *source;
#endif
-#ifdef NEED_THREADS
- if (g_thread_supported() == FALSE)
- g_thread_init(NULL);
-#endif
-
context = g_option_context_new(NULL);
g_option_context_add_main_entries(context, options, NULL);
@@ -246,13 +241,6 @@ int main(int argc, char **argv)
event_loop = g_main_loop_new(NULL, FALSE);
-#ifdef NEED_THREADS
- if (dbus_threads_init_default() == FALSE) {
- fprintf(stderr, "Can't init usage of threads\n");
- exit(1);
- }
-#endif
-
#ifdef HAVE_ELL
l_log_set_stderr();
l_debug_enable("*");
diff --git a/tools/auto-enable.c b/tools/auto-enable.c
index 87fb0a8d..1fb23401 100644
--- a/tools/auto-enable.c
+++ b/tools/auto-enable.c
@@ -492,11 +492,6 @@ int main(int argc, char **argv)
guint watch;
struct sigaction sa;
-#ifdef NEED_THREADS
- if (g_thread_supported() == FALSE)
- g_thread_init(NULL);
-#endif
-
context = g_option_context_new(NULL);
g_option_context_add_main_entries(context, options, NULL);
@@ -518,13 +513,6 @@ int main(int argc, char **argv)
main_loop = g_main_loop_new(NULL, FALSE);
-#ifdef NEED_THREADS
- if (dbus_threads_init_default() == FALSE) {
- fprintf(stderr, "Can't init usage of threads\n");
- exit(1);
- }
-#endif
-
dbus_error_init(&err);
conn = g_dbus_setup_bus(DBUS_BUS_SYSTEM, NULL, &err);
diff --git a/tools/huawei-audio.c b/tools/huawei-audio.c
index 9997a581..b22b50a3 100644
--- a/tools/huawei-audio.c
+++ b/tools/huawei-audio.c
@@ -775,11 +775,6 @@ int main(int argc, char **argv)
guint watch;
struct sigaction sa;
-#ifdef NEED_THREADS
- if (g_thread_supported() == FALSE)
- g_thread_init(NULL);
-#endif
-
context = g_option_context_new(NULL);
g_option_context_add_main_entries(context, options, NULL);
@@ -801,13 +796,6 @@ int main(int argc, char **argv)
main_loop = g_main_loop_new(NULL, FALSE);
-#ifdef NEED_THREADS
- if (dbus_threads_init_default() == FALSE) {
- fprintf(stderr, "Can't init usage of threads\n");
- exit(1);
- }
-#endif
-
dbus_error_init(&err);
conn = g_dbus_setup_bus(DBUS_BUS_SYSTEM, NULL, &err);
--
2.14.1
9:55 a.m.
New subject: [PATCH 4/4] configure.ac: simplify usage of PKG_CHECK_MODULES
These days pkg-config does the right thing pretty much automatically so
the usage of the autoconf macros can be simplified a bit. This
functionality exists from pkg-config 0.24, which is already pretty old,
so we specify that as a minimum version for that utility.
---
configure.ac | 28 ++++++----------------------
1 file changed, 6 insertions(+), 22 deletions(-)
diff --git a/configure.ac b/configure.ac
index a22b0b11..d07652f1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -10,7 +10,7 @@ AM_MAINTAINER_MODE
AC_PREFIX_DEFAULT(/usr/local)
-PKG_PROG_PKG_CONFIG
+PKG_PROG_PKG_CONFIG([0.24])
COMPILER_FLAGS
@@ -63,15 +63,8 @@ AC_CHECK_FUNC(signalfd, dummy=yes,
AC_CHECK_LIB(dl, dlopen, dummy=yes,
AC_MSG_ERROR(dynamic linking loader is required))
-PKG_CHECK_MODULES(GLIB, glib-2.0 >= 2.32, dummy=yes,
- AC_MSG_ERROR(GLib >= 2.32 is required))
-AC_SUBST(GLIB_CFLAGS)
-AC_SUBST(GLIB_LIBS)
-
-PKG_CHECK_MODULES(DBUS, dbus-1 >= 1.4, dummy=yes,
- AC_MSG_ERROR(D-Bus >= 1.4 is required))
-AC_SUBST(DBUS_CFLAGS)
-AC_SUBST(DBUS_LIBS)
+PKG_CHECK_MODULES(GLIB, glib-2.0 >= 2.32)
+PKG_CHECK_MODULES(DBUS, dbus-1 >= 1.4)
AC_ARG_WITH(dbusconfdir, AC_HELP_STRING([--with-dbusconfdir=PATH],
[path to D-Bus config directory]), [path_dbusconf=${withval}],
@@ -118,8 +111,7 @@ AC_ARG_ENABLE(udev, AC_HELP_STRING([--disable-udev],
[disable udev modem detection support]),
[enable_udev=${enableval}])
if (test "${enable_udev}" != "no"); then
- PKG_CHECK_MODULES(UDEV, libudev >= 143, [enable_udev="yes"],
- AC_MSG_ERROR(libudev >= 143 is required))
+ PKG_CHECK_MODULES(UDEV, libudev >= 143, [enable_udev="yes"])
UDEV_DATADIR="`$PKG_CONFIG --variable=udevdir udev`"
if (test -z "${UDEV_DATADIR}"); then
UDEV_DATADIR="${sysconfdir}/udev/rules.d"
@@ -128,8 +120,6 @@ if (test "${enable_udev}" != "no"); then
fi
AC_SUBST(UDEV_DATADIR)
fi
-AC_SUBST(UDEV_CFLAGS)
-AC_SUBST(UDEV_LIBS)
AM_CONDITIONAL(UDEV, test "${enable_udev}" = "yes")
AC_ARG_ENABLE(atmodem, AC_HELP_STRING([--disable-atmodem],
@@ -172,10 +162,7 @@ AC_ARG_ENABLE(bluez4, AC_HELP_STRING([--enable-bluez4],
[enable_bluez4=${enableval}])
if (test "${enable_bluez4}" = "yes"); then
- PKG_CHECK_MODULES(BLUEZ, bluez >= 4.99 bluez < 5, dummy=yes,
- AC_MSG_ERROR(Bluetooth library >= 4.99 and < 5 is required))
- AC_SUBST(BLUEZ_CFLAGS)
- AC_SUBST(BLUEZ_LIBS)
+ PKG_CHECK_MODULES(BLUEZ, bluez >= 4.99 bluez < 5)
fi
AM_CONDITIONAL(BLUEZ4, test "${enable_bluetooth}" != "no" &&
test "${enable_bluez4}" = "yes")
@@ -220,10 +207,7 @@ AC_ARG_ENABLE(ell, AC_HELP_STRING([--enable-ell],
if (test "${enable_ell}" = "yes"); then
AC_DEFINE(HAVE_ELL, 1, [Defined if Ell is enabled])
- PKG_CHECK_MODULES(ELL, ell >= 0.2, dummy=yes,
- AC_MSG_ERROR(ell library >= 0.2 is required))
- AC_SUBST(ELL_CFLAGS)
- AC_SUBST(ELL_LIBS)
+ PKG_CHECK_MODULES(ELL, ell >= 0.2)
fi
AM_CONDITIONAL(MBIMMODEM, test "${enable_ell}" != "no" &&
test "${enable_mbimmodem}" = "yes")
--
2.14.1
1677
days inactive
1687
days old
6 comments
2 participants
participants (2)
-
Denis Kenzior -
Jonas Bonn