Greetings, I have an embedded device with a ublox TOBY-R200 on it. I want to use connman to manage any cellular connection on that modem since connman is already managing ethernet and wifi connectivity. oFono seems like the best option. I see that there is already a ublox plugin for oFono but I don't think the TOBY-R200 is supported. The cell module is soldered onto the board and appears as a USB device. [ 6.519190] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.519197] usb 1-1: Product: u-blox Cellular Module [ 6.519204] usb 1-1: Manufacturer: u-blox [ 6.519211] usb 1-1: SerialNumber: 352848080392646 I can send AT commands to the modem over /dev/ttyACM0. Cheers, Frank _______________________________________________ ofono mailing list ofono(a)ofono.org https://lists.ofono.org/mailman/listinfo/ofono

can you send the result of "lsusb" and "lsusb -t"?

can you send the result of "lsusb" and "lsusb -t"?

can you send the result of "lsusb" and "lsusb -t"?

hi Frank, your modem doesn't seem to be supported. There are these models: SARA_G270 = 1102, TOBYL2_COMPATIBLE_MODE = 1141, TOBYL2_MEDIUM_THROUGHPUT_MODE = 1143, TOBYL2_HIGH_THROUGHPUT_MODE = 1146, If your model is compatible with any of them, I can add the 1107 for you for a test. from the PID, I would say it should be intermediate between the SARA_G260 and the TOBYL2_COMPATIBLE_MODE. Most likely it will work this latter, but maybe not all features... Are you willing to test? Best regards, Giacinto On Thu, Sep 13, 2018 at 7:48 PM Frank Vasquez <frankv(a)helium.com&gt; wrote: > Hi Giacinto, > > > can you send the result of "lsusb" and "lsusb -t"? > > The usbutils version of lsusb is somewhat better. > > # lsusb > Bus 002 Device 001: ID 1d6b:0003 > Bus 001 Device 002: ID 1546:1107 > Bus 001 Device 001: ID 1d6b:0002 > # lsusb -t > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M > |__ Port 1: Dev 2, If 0, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 1, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 2, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 3, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 4, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 5, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 6, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 7, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 8, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 9, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 10, Class=, Driver=cdc_acm, 480M > |__ Port 1: Dev 2, If 11, Class=, Driver=cdc_acm, 480M > > And here is a relevant excerpt from lsusb -v. > > Bus 001 Device 002: ID 1546:1107 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 239 > bDeviceSubClass 2 > bDeviceProtocol 1 > bMaxPacketSize0 64 > idVendor 0x1546 > idProduct 0x1107 > bcdDevice 17.29 > iManufacturer 1 u-blox > iProduct 2 u-blox Cellular Module > iSerial 3 352848080392646 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 405 > bNumInterfaces 12 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xe0 > Self Powered > Remote Wakeup > MaxPower 100mA > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 0 > bInterfaceCount 2 > bFunctionClass 2 > bFunctionSubClass 2 > bFunctionProtocol 1 > iFunction 4 CDC ACM > ... > > Cheers, > Frank > > > On Thu, Sep 13, 2018 at 10:21 AM Frank Vasquez <frankv(a)helium.com&gt; wrote: > >> Hi Giacinto, >> >> > can you send the result of "lsusb" and "lsusb -t"? >> >> # lsusb -t >> Bus 001 Device 001: ID 1d6b:0002 >> Bus 001 Device 002: ID 1546:1107 >> Bus 002 Device 001: ID 1d6b:0003 >> >> I am running BusyBox's stripped down version of lsusb that's why >> information is so lacking. >> I'll install usbutils on my device's Buildroot image and rerun the >> commands. >> >> Cheers, >> Frank >> >> On Thu, Sep 13, 2018 at 3:49 AM Giacinto Cifelli <gciofono(a)gmail.com&gt; >> wrote: >> >>> hi Frank, >>> >>> can you send the result of "lsusb" and "lsusb -t"? >>> >>> Giacinto >>> >>> On Thu, 13 Sep 2018, 00:41 Frank Vasquez, <frankv(a)helium.com&gt; wrote: >>> >>>> Greetings, >>>> >>>> I have an embedded device with a ublox TOBY-R200 on it. I want to use >>>> connman to manage any cellular connection on that modem since connman is >>>> already managing ethernet and wifi connectivity. oFono seems like the best >>>> option. I see that there is already a ublox plugin for oFono but I don't >>>> think the TOBY-R200 is supported. The cell module is soldered onto the >>>> board and appears as a USB device. >>>> >>>> [ 6.519190] usb 1-1: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=3 >>>> [ 6.519197] usb 1-1: Product: u-blox Cellular Module >>>> [ 6.519204] usb 1-1: Manufacturer: u-blox >>>> [ 6.519211] usb 1-1: SerialNumber: 352848080392646 >>>> >>>> I can send AT commands to the modem over /dev/ttyACM0. >>>> >>>> Cheers, >>>> Frank >>>> _______________________________________________ >>>> ofono mailing list >>>> ofono(a)ofono.org >>>> https://lists.ofono.org/mailman/listinfo/ofono >>>> >>>

Hi Giancito, I modified ublox.c as follows. enum supported_models { SARA_G270 = 1102, TOBYL2_COMPATIBLE_MODE = 1141, TOBYL2_MEDIUM_THROUGHPUT_MODE = 1143, TOBYL2_HIGH_THROUGHPUT_MODE = 1107, /* was 1146 */ }; And still no luck. # ./list-modems # I see no evidence that oFono's ublox driver is being loaded even though I added the following line to 60-serial-rules in /etc/udev/rules.d/60-serial-rules. KERNEL=="ttyACM0", ENV{OFONO_DRIVER}="ublox" I want TOBYL2_HIGH_THROUGHPUT_MODE because that's the mode that uses LTE. Cheers, Frank On Thu, Sep 13, 2018 at 12:18 PM Frank Vasquez <frankv(a)helium.com&gt; wrote: > Hi Giacinto, > > The TOBY-R200 is an LTE module. I see that the ublox oFono plugin > supports LTE on the TOBY-L2 so maybe it will work on the TOBY-R200 as > well. I think many of the AT commands are the same across ublox cellular > modems so yes let's give testing a shot. > > I am using Buildroot to build oFono for my Linux device. > > > ################################################################################ > # > # ofono > # > > ################################################################################ > > OFONO_VERSION = 1.21 > OFONO_SOURCE = ofono-$(OFONO_VERSION).tar.xz > OFONO_SITE = $(BR2_KERNEL_MIRROR)/linux/network/ofono > OFONO_LICENSE = GPL-2.0 > OFONO_LICENSE_FILES = COPYING > OFONO_DEPENDENCIES = \ > host-pkgconf \ > dbus \ > libglib2 \ > libcap-ng \ > mobile-broadband-provider-info > > OFONO_CONF_OPTS = \ > --disable-test \ > --with-dbusconfdir=/etc \ > $(if $(BR2_INIT_SYSTEMD),--with-systemdunitdir=/usr/lib/systemd/system) > > # N.B. Qualcomm QMI modem support requires O_CLOEXEC; so > # make sure that it is defined. > OFONO_CONF_ENV += CFLAGS="$(TARGET_CFLAGS) -D_GNU_SOURCE" > > define OFONO_INSTALL_INIT_SYSV > $(INSTALL) -m 0755 -D package/ofono/S46ofono > $(TARGET_DIR)/etc/init.d/S46ofono > endef > > define OFONO_INSTALL_INIT_SYSTEMD > mkdir -p $(TARGET_DIR)/etc/systemd/systemd/multi-user.target.wants > ln -fs ../../../../usr/lib/systemd/system/ofono.service \ > $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants > endef > > ifeq ($(BR2_PACKAGE_HAS_UDEV),y) > OFONO_CONF_OPTS += --enable-udev > OFONO_DEPENDENCIES += udev > else > OFONO_CONF_OPTS += --disable-udev > endif > > ifeq ($(BR2_PACKAGE_BLUEZ_UTILS),y) > OFONO_CONF_OPTS += --enable-bluetooth > OFONO_DEPENDENCIES += bluez_utils > else > OFONO_CONF_OPTS += --disable-bluetooth > endif > > $(eval $(autotools-package)) > > I can modify the downloaded oFono source code (plugins and drivers > directories) and rebuild it as needed to test the TOBY-R200. > > $ ls -l output/build/ofono-1.21 > total 2528 > -rw-r--r-- 1 frank frank 835 Oct 5 2017 acinclude.m4 > -rw-r--r-- 1 frank frank 360491 Oct 5 2017 aclocal.m4 > -rw-r--r-- 1 frank frank 5356 Oct 5 2017 AUTHORS > drwxr-xr-x 2 frank frank 4096 Oct 5 2017 btio > -rw-r--r-- 1 frank frank 30811 Oct 5 2017 ChangeLog > -rwxr-xr-x 1 frank frank 7333 Oct 5 2017 compile > -rwxr-xr-x 1 frank frank 43765 Sep 13 11:39 config.guess > -rw-r--r-- 1 frank frank 2775 Sep 13 11:39 config.h > -rw-r--r-- 1 frank frank 2492 Oct 5 2017 config.h.in > -rw-r--r-- 1 frank frank 42877 Sep 13 11:39 config.log > -rwxr-xr-x 1 frank frank 67571 Sep 13 11:39 config.status > -rwxr-xr-x 1 frank frank 36171 Sep 13 11:39 config.sub > -rwxr-xr-x 1 frank frank 467689 Oct 5 2017 configure > -rw-r--r-- 1 frank frank 8223 Oct 5 2017 configure.ac > -rw-r--r-- 1 frank frank 18011 Jul 10 2009 COPYING > -rwxr-xr-x 1 frank frank 23566 Oct 5 2017 depcomp > drwxr-xr-x 2 frank frank 4096 Oct 5 2017 doc > drwxr-xr-x 25 frank frank 4096 Oct 5 2017 drivers > drwxr-xr-x 2 frank frank 4096 Sep 13 11:39 dundee > drwxr-xr-x 2 frank frank 4096 Oct 5 2017 examples > drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 gatchat > drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 gdbus > drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 gisi > drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 gril > drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 include > -rw-r--r-- 1 frank frank 9478 Jul 10 2009 INSTALL > -rwxr-xr-x 1 frank frank 14431 Oct 5 2017 install-sh > -rwxr-xr-x 1 frank frank 294282 Sep 13 11:39 libtool > -rw-r--r-- 1 frank frank 283940 Sep 13 11:39 ltmain.sh > -rw-r--r-- 1 frank frank 283672 Oct 5 2017 ltmain.sh.orig > -rw-r--r-- 1 frank frank 185608 Sep 13 11:39 Makefile > -rw-r--r-- 1 frank frank 28755 Oct 5 2017 Makefile.am > -rw-r--r-- 1 frank frank 204311 Oct 5 2017 Makefile.in > -rwxr-xr-x 1 frank frank 6872 Oct 5 2017 missing > -rw-r--r-- 1 frank frank 0 Jul 10 2009 NEWS > -rw-r--r-- 1 frank frank 310 Sep 13 11:39 ofono.pc > -rw-r--r-- 1 frank frank 325 Feb 6 2011 ofono.pc.in > drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 plugins > -rw-r--r-- 1 frank frank 886 Jul 19 2012 README > drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 src > -rw-r--r-- 1 frank frank 23 Sep 13 11:39 stamp-h1 > drwxr-xr-x 2 frank frank 4096 Oct 5 2017 test > -rwxr-xr-x 1 frank frank 4287 Sep 13 2015 test-driver > -rw-r--r-- 1 frank frank 17996 May 3 2016 TODO > drwxr-xr-x 2 frank frank 4096 Oct 5 2017 tools > drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 unit > > Cheers, > Frank > > > > On Thu, Sep 13, 2018 at 11:48 AM Giacinto Cifelli <gciofono(a)gmail.com&gt; > wrote: > >> hi Frank, >> >> your modem doesn't seem to be supported. >> There are these models: >> SARA_G270 = 1102, >> TOBYL2_COMPATIBLE_MODE = 1141, >> TOBYL2_MEDIUM_THROUGHPUT_MODE = 1143, >> TOBYL2_HIGH_THROUGHPUT_MODE = 1146, >> If your model is compatible with any of them, I can add the 1107 for >> you for a test. >> >> from the PID, I would say it should be intermediate between the >> SARA_G260 and the TOBYL2_COMPATIBLE_MODE. >> Most likely it will work this latter, but maybe not all features... >> >> Are you willing to test? >> >> Best regards, >> Giacinto >> >> >> >> On Thu, Sep 13, 2018 at 7:48 PM Frank Vasquez <frankv(a)helium.com&gt; wrote: >> >>> Hi Giacinto, >>> >>> > can you send the result of "lsusb" and "lsusb -t"? >>> >>> The usbutils version of lsusb is somewhat better. >>> >>> # lsusb >>> Bus 002 Device 001: ID 1d6b:0003 >>> Bus 001 Device 002: ID 1546:1107 >>> Bus 001 Device 001: ID 1d6b:0002 >>> # lsusb -t >>> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M >>> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M >>> |__ Port 1: Dev 2, If 0, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 1, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 2, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 3, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 4, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 5, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 6, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 7, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 8, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 9, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 10, Class=, Driver=cdc_acm, 480M >>> |__ Port 1: Dev 2, If 11, Class=, Driver=cdc_acm, 480M >>> >>> And here is a relevant excerpt from lsusb -v. >>> >>> Bus 001 Device 002: ID 1546:1107 >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 2.00 >>> bDeviceClass 239 >>> bDeviceSubClass 2 >>> bDeviceProtocol 1 >>> bMaxPacketSize0 64 >>> idVendor 0x1546 >>> idProduct 0x1107 >>> bcdDevice 17.29 >>> iManufacturer 1 u-blox >>> iProduct 2 u-blox Cellular Module >>> iSerial 3 352848080392646 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> bLength 9 >>> bDescriptorType 2 >>> wTotalLength 405 >>> bNumInterfaces 12 >>> bConfigurationValue 1 >>> iConfiguration 0 >>> bmAttributes 0xe0 >>> Self Powered >>> Remote Wakeup >>> MaxPower 100mA >>> Interface Association: >>> bLength 8 >>> bDescriptorType 11 >>> bFirstInterface 0 >>> bInterfaceCount 2 >>> bFunctionClass 2 >>> bFunctionSubClass 2 >>> bFunctionProtocol 1 >>> iFunction 4 CDC ACM >>> ... >>> >>> Cheers, >>> Frank >>> >>> >>> On Thu, Sep 13, 2018 at 10:21 AM Frank Vasquez <frankv(a)helium.com&gt; >>> wrote: >>> >>>> Hi Giacinto, >>>> >>>> > can you send the result of "lsusb" and "lsusb -t"? >>>> >>>> # lsusb -t >>>> Bus 001 Device 001: ID 1d6b:0002 >>>> Bus 001 Device 002: ID 1546:1107 >>>> Bus 002 Device 001: ID 1d6b:0003 >>>> >>>> I am running BusyBox's stripped down version of lsusb that's why >>>> information is so lacking. >>>> I'll install usbutils on my device's Buildroot image and rerun the >>>> commands. >>>> >>>> Cheers, >>>> Frank >>>> >>>> On Thu, Sep 13, 2018 at 3:49 AM Giacinto Cifelli <gciofono(a)gmail.com&gt; >>>> wrote: >>>> >>>>> hi Frank, >>>>> >>>>> can you send the result of "lsusb" and "lsusb -t"? >>>>> >>>>> Giacinto >>>>> >>>>> On Thu, 13 Sep 2018, 00:41 Frank Vasquez, <frankv(a)helium.com&gt; wrote: >>>>> >>>>>> Greetings, >>>>>> >>>>>> I have an embedded device with a ublox TOBY-R200 on it. I want to >>>>>> use connman to manage any cellular connection on that modem since connman >>>>>> is already managing ethernet and wifi connectivity. oFono seems like the >>>>>> best option. I see that there is already a ublox plugin for oFono but I >>>>>> don't think the TOBY-R200 is supported. The cell module is soldered onto >>>>>> the board and appears as a USB device. >>>>>> >>>>>> [ 6.519190] usb 1-1: New USB device strings: Mfr=1, Product=2, >>>>>> SerialNumber=3 >>>>>> [ 6.519197] usb 1-1: Product: u-blox Cellular Module >>>>>> [ 6.519204] usb 1-1: Manufacturer: u-blox >>>>>> [ 6.519211] usb 1-1: SerialNumber: 352848080392646 >>>>>> >>>>>> I can send AT commands to the modem over /dev/ttyACM0. >>>>>> >>>>>> Cheers, >>>>>> Frank >>>>>> _______________________________________________ >>>>>> ofono mailing list >>>>>> ofono(a)ofono.org >>>>>> https://lists.ofono.org/mailman/listinfo/ofono >>>>>> >>>>>

Hi Giacinto, I applied your patch for the TOBY-R200 and the results look very promising. # ./list-modems [ /ublox_0 ] Online = 1 Powered = 1 Lockdown = 0 Emergency = 0 Manufacturer = u-blox Model = TOBY-R200 Revision = 30.31 Serial = 352848080392646 Interfaces = org.ofono.NetworkRegistration org.ofono.NetworkMonitor org.ofono.ConnectionManager org.ofono.LongTermEvolution org.ofono.AllowedAccessPoints org.ofono.VoiceCallManager org.ofono.SimManager Features = net gprs sim Type = hardware [ org.ofono.NetworkRegistration ] Status = searching Mode = auto Name = [ org.ofono.NetworkMonitor ] [ org.ofono.ConnectionManager ] Attached = 0 Bearer = none RoamingAllowed = 0 Powered = 1 [ org.ofono.LongTermEvolution ] DefaultAccessPointName = [ org.ofono.AllowedAccessPoints ] [ org.ofono.VoiceCallManager ] EmergencyNumbers = 112 911 [ org.ofono.SimManager ] Present = 1 CardIdentifier = 8944501011176099176 SubscriberIdentity = 234507098609917 ServiceProviderName = Hologram FixedDialing = 0 BarredDialing = 0 MobileCountryCode = 234 MobileNetworkCode = 50 SubscriberNumbers = LockedPins = PreferredLanguages = en PinRequired = none Retries = [pin = 3] [pin2 = 3] [puk = 10] [puk2 = 10] # ./enable-modem Connecting modem /ublox_0... # ./create-internet-context hologram Found context /ublox_0/context1 Setting APN to hologram # ./online-modem Setting modem /ublox_0 online... # ./activate-context Error activating /ublox_0/context1: org.ofono.Error.NotAttached: GPRS is not attached

As you can see I was unable to activate-context but I got pretty close. I'm willing to apply more code changes if it means I can get cellular integration with connman.

Cheers, Frank On Thu, Sep 13, 2018 at 9:19 PM Giacinto Cifelli <gciofono(a)gmail.com&gt; wrote: > Hi Frank, > > both TOBYL2_COMPATIBLE_MODE and TOBYL2_HIGH_THROUGHPUT_MODE behave the > same in the code. > (TOBYL2_MEDIUM_THROUGHPUT_MODE is recognized but discarded later in the > code) > Please replace the two attached files in the plugins directory. > Let me know if it works (it would be good to know which functionalities > you try out), and if so I can submit the changes as patches. > > You don't need the udev rule for usb modems, it is recognized > automatically. > > Best Regards, > Giacinto > > > > > > On Thu, Sep 13, 2018 at 10:51 PM Frank Vasquez <frankv(a)helium.com&gt; wrote: > >> Hi Giancito, >> >> I modified ublox.c as follows. >> >> enum supported_models { >> SARA_G270 = 1102, >> TOBYL2_COMPATIBLE_MODE = 1141, >> TOBYL2_MEDIUM_THROUGHPUT_MODE = 1143, >> TOBYL2_HIGH_THROUGHPUT_MODE = 1107, /* was 1146 */ >> }; >> >> And still no luck. >> >> # ./list-modems >> # >> >> I see no evidence that oFono's ublox driver is being loaded even though >> I added the following line to 60-serial-rules in >> /etc/udev/rules.d/60-serial-rules. >> >> KERNEL=="ttyACM0", ENV{OFONO_DRIVER}="ublox" >> >> I want TOBYL2_HIGH_THROUGHPUT_MODE because that's the mode that uses LTE. >> >> Cheers, >> Frank >> >> >> On Thu, Sep 13, 2018 at 12:18 PM Frank Vasquez <frankv(a)helium.com&gt; >> wrote: >> >>> Hi Giacinto, >>> >>> The TOBY-R200 is an LTE module. I see that the ublox oFono plugin >>> supports LTE on the TOBY-L2 so maybe it will work on the TOBY-R200 as >>> well. I think many of the AT commands are the same across ublox cellular >>> modems so yes let's give testing a shot. >>> >>> I am using Buildroot to build oFono for my Linux device. >>> >>> >>> ################################################################################ >>> # >>> # ofono >>> # >>> >>> ################################################################################ >>> >>> OFONO_VERSION = 1.21 >>> OFONO_SOURCE = ofono-$(OFONO_VERSION).tar.xz >>> OFONO_SITE = $(BR2_KERNEL_MIRROR)/linux/network/ofono >>> OFONO_LICENSE = GPL-2.0 >>> OFONO_LICENSE_FILES = COPYING >>> OFONO_DEPENDENCIES = \ >>> host-pkgconf \ >>> dbus \ >>> libglib2 \ >>> libcap-ng \ >>> mobile-broadband-provider-info >>> >>> OFONO_CONF_OPTS = \ >>> --disable-test \ >>> --with-dbusconfdir=/etc \ >>> $(if $(BR2_INIT_SYSTEMD),--with-systemdunitdir=/usr/lib/systemd/system) >>> >>> # N.B. Qualcomm QMI modem support requires O_CLOEXEC; so >>> # make sure that it is defined. >>> OFONO_CONF_ENV += CFLAGS="$(TARGET_CFLAGS) -D_GNU_SOURCE" >>> >>> define OFONO_INSTALL_INIT_SYSV >>> $(INSTALL) -m 0755 -D package/ofono/S46ofono >>> $(TARGET_DIR)/etc/init.d/S46ofono >>> endef >>> >>> define OFONO_INSTALL_INIT_SYSTEMD >>> mkdir -p $(TARGET_DIR)/etc/systemd/systemd/multi-user.target.wants >>> ln -fs ../../../../usr/lib/systemd/system/ofono.service \ >>> $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants >>> endef >>> >>> ifeq ($(BR2_PACKAGE_HAS_UDEV),y) >>> OFONO_CONF_OPTS += --enable-udev >>> OFONO_DEPENDENCIES += udev >>> else >>> OFONO_CONF_OPTS += --disable-udev >>> endif >>> >>> ifeq ($(BR2_PACKAGE_BLUEZ_UTILS),y) >>> OFONO_CONF_OPTS += --enable-bluetooth >>> OFONO_DEPENDENCIES += bluez_utils >>> else >>> OFONO_CONF_OPTS += --disable-bluetooth >>> endif >>> >>> $(eval $(autotools-package)) >>> >>> I can modify the downloaded oFono source code (plugins and drivers >>> directories) and rebuild it as needed to test the TOBY-R200. >>> >>> $ ls -l output/build/ofono-1.21 >>> total 2528 >>> -rw-r--r-- 1 frank frank 835 Oct 5 2017 acinclude.m4 >>> -rw-r--r-- 1 frank frank 360491 Oct 5 2017 aclocal.m4 >>> -rw-r--r-- 1 frank frank 5356 Oct 5 2017 AUTHORS >>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 btio >>> -rw-r--r-- 1 frank frank 30811 Oct 5 2017 ChangeLog >>> -rwxr-xr-x 1 frank frank 7333 Oct 5 2017 compile >>> -rwxr-xr-x 1 frank frank 43765 Sep 13 11:39 config.guess >>> -rw-r--r-- 1 frank frank 2775 Sep 13 11:39 config.h >>> -rw-r--r-- 1 frank frank 2492 Oct 5 2017 config.h.in >>> -rw-r--r-- 1 frank frank 42877 Sep 13 11:39 config.log >>> -rwxr-xr-x 1 frank frank 67571 Sep 13 11:39 config.status >>> -rwxr-xr-x 1 frank frank 36171 Sep 13 11:39 config.sub >>> -rwxr-xr-x 1 frank frank 467689 Oct 5 2017 configure >>> -rw-r--r-- 1 frank frank 8223 Oct 5 2017 configure.ac >>> -rw-r--r-- 1 frank frank 18011 Jul 10 2009 COPYING >>> -rwxr-xr-x 1 frank frank 23566 Oct 5 2017 depcomp >>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 doc >>> drwxr-xr-x 25 frank frank 4096 Oct 5 2017 drivers >>> drwxr-xr-x 2 frank frank 4096 Sep 13 11:39 dundee >>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 examples >>> drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 gatchat >>> drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 gdbus >>> drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 gisi >>> drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 gril >>> drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 include >>> -rw-r--r-- 1 frank frank 9478 Jul 10 2009 INSTALL >>> -rwxr-xr-x 1 frank frank 14431 Oct 5 2017 install-sh >>> -rwxr-xr-x 1 frank frank 294282 Sep 13 11:39 libtool >>> -rw-r--r-- 1 frank frank 283940 Sep 13 11:39 ltmain.sh >>> -rw-r--r-- 1 frank frank 283672 Oct 5 2017 ltmain.sh.orig >>> -rw-r--r-- 1 frank frank 185608 Sep 13 11:39 Makefile >>> -rw-r--r-- 1 frank frank 28755 Oct 5 2017 Makefile.am >>> -rw-r--r-- 1 frank frank 204311 Oct 5 2017 Makefile.in >>> -rwxr-xr-x 1 frank frank 6872 Oct 5 2017 missing >>> -rw-r--r-- 1 frank frank 0 Jul 10 2009 NEWS >>> -rw-r--r-- 1 frank frank 310 Sep 13 11:39 ofono.pc >>> -rw-r--r-- 1 frank frank 325 Feb 6 2011 ofono.pc.in >>> drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 plugins >>> -rw-r--r-- 1 frank frank 886 Jul 19 2012 README >>> drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 src >>> -rw-r--r-- 1 frank frank 23 Sep 13 11:39 stamp-h1 >>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 test >>> -rwxr-xr-x 1 frank frank 4287 Sep 13 2015 test-driver >>> -rw-r--r-- 1 frank frank 17996 May 3 2016 TODO >>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 tools >>> drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 unit >>> >>> Cheers, >>> Frank >>> >>> >>> >>> On Thu, Sep 13, 2018 at 11:48 AM Giacinto Cifelli <gciofono(a)gmail.com&gt; >>> wrote: >>> >>>> hi Frank, >>>> >>>> your modem doesn't seem to be supported. >>>> There are these models: >>>> SARA_G270 = 1102, >>>> TOBYL2_COMPATIBLE_MODE = 1141, >>>> TOBYL2_MEDIUM_THROUGHPUT_MODE = 1143, >>>> TOBYL2_HIGH_THROUGHPUT_MODE = 1146, >>>> If your model is compatible with any of them, I can add the 1107 for >>>> you for a test. >>>> >>>> from the PID, I would say it should be intermediate between the >>>> SARA_G260 and the TOBYL2_COMPATIBLE_MODE. >>>> Most likely it will work this latter, but maybe not all features... >>>> >>>> Are you willing to test? >>>> >>>> Best regards, >>>> Giacinto >>>> >>>> >>>> >>>> On Thu, Sep 13, 2018 at 7:48 PM Frank Vasquez <frankv(a)helium.com&gt; >>>> wrote: >>>> >>>>> Hi Giacinto, >>>>> >>>>> > can you send the result of "lsusb" and "lsusb -t"? >>>>> >>>>> The usbutils version of lsusb is somewhat better. >>>>> >>>>> # lsusb >>>>> Bus 002 Device 001: ID 1d6b:0003 >>>>> Bus 001 Device 002: ID 1546:1107 >>>>> Bus 001 Device 001: ID 1d6b:0002 >>>>> # lsusb -t >>>>> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M >>>>> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M >>>>> |__ Port 1: Dev 2, If 0, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 1, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 2, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 3, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 4, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 5, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 6, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 7, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 8, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 9, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 10, Class=, Driver=cdc_acm, 480M >>>>> |__ Port 1: Dev 2, If 11, Class=, Driver=cdc_acm, 480M >>>>> >>>>> And here is a relevant excerpt from lsusb -v. >>>>> >>>>> Bus 001 Device 002: ID 1546:1107 >>>>> Device Descriptor: >>>>> bLength 18 >>>>> bDescriptorType 1 >>>>> bcdUSB 2.00 >>>>> bDeviceClass 239 >>>>> bDeviceSubClass 2 >>>>> bDeviceProtocol 1 >>>>> bMaxPacketSize0 64 >>>>> idVendor 0x1546 >>>>> idProduct 0x1107 >>>>> bcdDevice 17.29 >>>>> iManufacturer 1 u-blox >>>>> iProduct 2 u-blox Cellular Module >>>>> iSerial 3 352848080392646 >>>>> bNumConfigurations 1 >>>>> Configuration Descriptor: >>>>> bLength 9 >>>>> bDescriptorType 2 >>>>> wTotalLength 405 >>>>> bNumInterfaces 12 >>>>> bConfigurationValue 1 >>>>> iConfiguration 0 >>>>> bmAttributes 0xe0 >>>>> Self Powered >>>>> Remote Wakeup >>>>> MaxPower 100mA >>>>> Interface Association: >>>>> bLength 8 >>>>> bDescriptorType 11 >>>>> bFirstInterface 0 >>>>> bInterfaceCount 2 >>>>> bFunctionClass 2 >>>>> bFunctionSubClass 2 >>>>> bFunctionProtocol 1 >>>>> iFunction 4 CDC ACM >>>>> ... >>>>> >>>>> Cheers, >>>>> Frank >>>>> >>>>> >>>>> On Thu, Sep 13, 2018 at 10:21 AM Frank Vasquez <frankv(a)helium.com&gt; >>>>> wrote: >>>>> >>>>>> Hi Giacinto, >>>>>> >>>>>> > can you send the result of "lsusb" and "lsusb -t"? >>>>>> >>>>>> # lsusb -t >>>>>> Bus 001 Device 001: ID 1d6b:0002 >>>>>> Bus 001 Device 002: ID 1546:1107 >>>>>> Bus 002 Device 001: ID 1d6b:0003 >>>>>> >>>>>> I am running BusyBox's stripped down version of lsusb that's why >>>>>> information is so lacking. >>>>>> I'll install usbutils on my device's Buildroot image and rerun the >>>>>> commands. >>>>>> >>>>>> Cheers, >>>>>> Frank >>>>>> >>>>>> On Thu, Sep 13, 2018 at 3:49 AM Giacinto Cifelli <gciofono(a)gmail.com&gt; >>>>>> wrote: >>>>>> >>>>>>> hi Frank, >>>>>>> >>>>>>> can you send the result of "lsusb" and "lsusb -t"? >>>>>>> >>>>>>> Giacinto >>>>>>> >>>>>>> On Thu, 13 Sep 2018, 00:41 Frank Vasquez, <frankv(a)helium.com&gt; >>>>>>> wrote: >>>>>>> >>>>>>>> Greetings, >>>>>>>> >>>>>>>> I have an embedded device with a ublox TOBY-R200 on it. I want to >>>>>>>> use connman to manage any cellular connection on that modem since connman >>>>>>>> is already managing ethernet and wifi connectivity. oFono seems like the >>>>>>>> best option. I see that there is already a ublox plugin for oFono but I >>>>>>>> don't think the TOBY-R200 is supported. The cell module is soldered onto >>>>>>>> the board and appears as a USB device. >>>>>>>> >>>>>>>> [ 6.519190] usb 1-1: New USB device strings: Mfr=1, Product=2, >>>>>>>> SerialNumber=3 >>>>>>>> [ 6.519197] usb 1-1: Product: u-blox Cellular Module >>>>>>>> [ 6.519204] usb 1-1: Manufacturer: u-blox >>>>>>>> [ 6.519211] usb 1-1: SerialNumber: 352848080392646 >>>>>>>> >>>>>>>> I can send AT commands to the modem over /dev/ttyACM0. >>>>>>>> >>>>>>>> Cheers, >>>>>>>> Frank >>>>>>>> _______________________________________________ >>>>>>>> ofono mailing list >>>>>>>> ofono(a)ofono.org >>>>>>>> https://lists.ofono.org/mailman/listinfo/ofono >>>>>>>> >>>>>>>

Hi Frank, is it working? I had a look at ublox specification, and I think you need some more support in ofono for establishing the LTE default bearer. I will take this back once I have submitted some patches for this support (and have been accepted). Best regards, Giacinto On Sat, Sep 15, 2018 at 8:31 AM Giacinto Cifelli <gciofono(a)gmail.com&gt; wrote: > Hi Frank, > > I am happy that it started working. > Reviewing your email, I doubted that it was more a configure parameters > issue. > The rest below, I shall not top-post in this distribution list. > > On Sat, Sep 15, 2018 at 2:54 AM Frank Vasquez <frankv(a)helium.com&gt; wrote: > >> Hi Giacinto, >> >> I applied your patch for the TOBY-R200 and the results look very >> promising. >> >> # ./list-modems >> [ /ublox_0 ] >> Online = 1 >> Powered = 1 >> Lockdown = 0 >> Emergency = 0 >> Manufacturer = u-blox >> Model = TOBY-R200 >> Revision = 30.31 >> Serial = 352848080392646 >> Interfaces = org.ofono.NetworkRegistration org.ofono.NetworkMonitor >> org.ofono.ConnectionManager org.ofono.LongTermEvolution >> org.ofono.AllowedAccessPoints org.ofono.VoiceCallManager >> org.ofono.SimManager >> Features = net gprs sim >> Type = hardware >> [ org.ofono.NetworkRegistration ] >> Status = searching >> Mode = auto >> Name = >> [ org.ofono.NetworkMonitor ] >> [ org.ofono.ConnectionManager ] >> Attached = 0 >> Bearer = none >> RoamingAllowed = 0 >> Powered = 1 >> [ org.ofono.LongTermEvolution ] >> DefaultAccessPointName = >> [ org.ofono.AllowedAccessPoints ] >> [ org.ofono.VoiceCallManager ] >> EmergencyNumbers = 112 911 >> [ org.ofono.SimManager ] >> Present = 1 >> CardIdentifier = 8944501011176099176 >> SubscriberIdentity = 234507098609917 >> ServiceProviderName = Hologram >> FixedDialing = 0 >> BarredDialing = 0 >> MobileCountryCode = 234 >> MobileNetworkCode = 50 >> SubscriberNumbers = >> LockedPins = >> PreferredLanguages = en >> PinRequired = none >> Retries = [pin = 3] [pin2 = 3] [puk = 10] [puk2 = 10] >> >> # ./enable-modem >> Connecting modem /ublox_0... >> # ./create-internet-context hologram >> Found context /ublox_0/context1 >> Setting APN to hologram >> # ./online-modem >> Setting modem /ublox_0 online... >> # ./activate-context >> Error activating /ublox_0/context1: org.ofono.Error.NotAttached: GPRS is >> not attached >> >> > Have you connected your antennas properly? Have you waited some 2 minutes > before trying the ./activate-context ? > If yes, then this module reports its attach status with some indicator > not recognized by ofono today (blind shot: +CEREG). > > > >> As you can see I was unable to activate-context but I got pretty close. >> I'm willing to apply more code changes if it means I can get cellular >> integration with connman. >> > > In general I test on Ubuntu with d-feed, so I don't know all the test > scripts, but there should be some to check whether the modem is reported > registered, to which technology, what the signal strength is, and if it is > reported attached. > If it is registered to LTE, it is attached, but ofono doesn't recognize > it automatically by radio technology, it needs a separate indicator. > > >> >> Cheers, >> Frank >> >> On Thu, Sep 13, 2018 at 9:19 PM Giacinto Cifelli <gciofono(a)gmail.com&gt; >> wrote: >> >>> Hi Frank, >>> >>> both TOBYL2_COMPATIBLE_MODE and TOBYL2_HIGH_THROUGHPUT_MODE behave >>> the same in the code. >>> (TOBYL2_MEDIUM_THROUGHPUT_MODE is recognized but discarded later in >>> the code) >>> Please replace the two attached files in the plugins directory. >>> Let me know if it works (it would be good to know which functionalities >>> you try out), and if so I can submit the changes as patches. >>> >>> You don't need the udev rule for usb modems, it is recognized >>> automatically. >>> >>> Best Regards, >>> Giacinto >>> >>> >>> >>> >>> >>> On Thu, Sep 13, 2018 at 10:51 PM Frank Vasquez <frankv(a)helium.com&gt; >>> wrote: >>> >>>> Hi Giancito, >>>> >>>> I modified ublox.c as follows. >>>> >>>> enum supported_models { >>>> SARA_G270 = 1102, >>>> TOBYL2_COMPATIBLE_MODE = 1141, >>>> TOBYL2_MEDIUM_THROUGHPUT_MODE = 1143, >>>> TOBYL2_HIGH_THROUGHPUT_MODE = 1107, /* was 1146 */ >>>> }; >>>> >>>> And still no luck. >>>> >>>> # ./list-modems >>>> # >>>> >>>> I see no evidence that oFono's ublox driver is being loaded even >>>> though I added the following line to 60-serial-rules in >>>> /etc/udev/rules.d/60-serial-rules. >>>> >>>> KERNEL=="ttyACM0", ENV{OFONO_DRIVER}="ublox" >>>> >>>> I want TOBYL2_HIGH_THROUGHPUT_MODE because that's the mode that uses >>>> LTE. >>>> >>>> Cheers, >>>> Frank >>>> >>>> >>>> On Thu, Sep 13, 2018 at 12:18 PM Frank Vasquez <frankv(a)helium.com&gt; >>>> wrote: >>>> >>>>> Hi Giacinto, >>>>> >>>>> The TOBY-R200 is an LTE module. I see that the ublox oFono plugin >>>>> supports LTE on the TOBY-L2 so maybe it will work on the TOBY-R200 as >>>>> well. I think many of the AT commands are the same across ublox cellular >>>>> modems so yes let's give testing a shot. >>>>> >>>>> I am using Buildroot to build oFono for my Linux device. >>>>> >>>>> >>>>> ################################################################################ >>>>> # >>>>> # ofono >>>>> # >>>>> >>>>> ################################################################################ >>>>> >>>>> OFONO_VERSION = 1.21 >>>>> OFONO_SOURCE = ofono-$(OFONO_VERSION).tar.xz >>>>> OFONO_SITE = $(BR2_KERNEL_MIRROR)/linux/network/ofono >>>>> OFONO_LICENSE = GPL-2.0 >>>>> OFONO_LICENSE_FILES = COPYING >>>>> OFONO_DEPENDENCIES = \ >>>>> host-pkgconf \ >>>>> dbus \ >>>>> libglib2 \ >>>>> libcap-ng \ >>>>> mobile-broadband-provider-info >>>>> >>>>> OFONO_CONF_OPTS = \ >>>>> --disable-test \ >>>>> --with-dbusconfdir=/etc \ >>>>> $(if >>>>> $(BR2_INIT_SYSTEMD),--with-systemdunitdir=/usr/lib/systemd/system) >>>>> >>>>> # N.B. Qualcomm QMI modem support requires O_CLOEXEC; so >>>>> # make sure that it is defined. >>>>> OFONO_CONF_ENV += CFLAGS="$(TARGET_CFLAGS) -D_GNU_SOURCE" >>>>> >>>>> define OFONO_INSTALL_INIT_SYSV >>>>> $(INSTALL) -m 0755 -D package/ofono/S46ofono >>>>> $(TARGET_DIR)/etc/init.d/S46ofono >>>>> endef >>>>> >>>>> define OFONO_INSTALL_INIT_SYSTEMD >>>>> mkdir -p $(TARGET_DIR)/etc/systemd/systemd/multi-user.target.wants >>>>> ln -fs ../../../../usr/lib/systemd/system/ofono.service \ >>>>> $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants >>>>> endef >>>>> >>>>> ifeq ($(BR2_PACKAGE_HAS_UDEV),y) >>>>> OFONO_CONF_OPTS += --enable-udev >>>>> OFONO_DEPENDENCIES += udev >>>>> else >>>>> OFONO_CONF_OPTS += --disable-udev >>>>> endif >>>>> >>>>> ifeq ($(BR2_PACKAGE_BLUEZ_UTILS),y) >>>>> OFONO_CONF_OPTS += --enable-bluetooth >>>>> OFONO_DEPENDENCIES += bluez_utils >>>>> else >>>>> OFONO_CONF_OPTS += --disable-bluetooth >>>>> endif >>>>> >>>>> $(eval $(autotools-package)) >>>>> >>>>> I can modify the downloaded oFono source code (plugins and drivers >>>>> directories) and rebuild it as needed to test the TOBY-R200. >>>>> >>>>> $ ls -l output/build/ofono-1.21 >>>>> total 2528 >>>>> -rw-r--r-- 1 frank frank 835 Oct 5 2017 acinclude.m4 >>>>> -rw-r--r-- 1 frank frank 360491 Oct 5 2017 aclocal.m4 >>>>> -rw-r--r-- 1 frank frank 5356 Oct 5 2017 AUTHORS >>>>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 btio >>>>> -rw-r--r-- 1 frank frank 30811 Oct 5 2017 ChangeLog >>>>> -rwxr-xr-x 1 frank frank 7333 Oct 5 2017 compile >>>>> -rwxr-xr-x 1 frank frank 43765 Sep 13 11:39 config.guess >>>>> -rw-r--r-- 1 frank frank 2775 Sep 13 11:39 config.h >>>>> -rw-r--r-- 1 frank frank 2492 Oct 5 2017 config.h.in >>>>> -rw-r--r-- 1 frank frank 42877 Sep 13 11:39 config.log >>>>> -rwxr-xr-x 1 frank frank 67571 Sep 13 11:39 config.status >>>>> -rwxr-xr-x 1 frank frank 36171 Sep 13 11:39 config.sub >>>>> -rwxr-xr-x 1 frank frank 467689 Oct 5 2017 configure >>>>> -rw-r--r-- 1 frank frank 8223 Oct 5 2017 configure.ac >>>>> -rw-r--r-- 1 frank frank 18011 Jul 10 2009 COPYING >>>>> -rwxr-xr-x 1 frank frank 23566 Oct 5 2017 depcomp >>>>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 doc >>>>> drwxr-xr-x 25 frank frank 4096 Oct 5 2017 drivers >>>>> drwxr-xr-x 2 frank frank 4096 Sep 13 11:39 dundee >>>>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 examples >>>>> drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 gatchat >>>>> drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 gdbus >>>>> drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 gisi >>>>> drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 gril >>>>> drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 include >>>>> -rw-r--r-- 1 frank frank 9478 Jul 10 2009 INSTALL >>>>> -rwxr-xr-x 1 frank frank 14431 Oct 5 2017 install-sh >>>>> -rwxr-xr-x 1 frank frank 294282 Sep 13 11:39 libtool >>>>> -rw-r--r-- 1 frank frank 283940 Sep 13 11:39 ltmain.sh >>>>> -rw-r--r-- 1 frank frank 283672 Oct 5 2017 ltmain.sh.orig >>>>> -rw-r--r-- 1 frank frank 185608 Sep 13 11:39 Makefile >>>>> -rw-r--r-- 1 frank frank 28755 Oct 5 2017 Makefile.am >>>>> -rw-r--r-- 1 frank frank 204311 Oct 5 2017 Makefile.in >>>>> -rwxr-xr-x 1 frank frank 6872 Oct 5 2017 missing >>>>> -rw-r--r-- 1 frank frank 0 Jul 10 2009 NEWS >>>>> -rw-r--r-- 1 frank frank 310 Sep 13 11:39 ofono.pc >>>>> -rw-r--r-- 1 frank frank 325 Feb 6 2011 ofono.pc.in >>>>> drwxr-xr-x 3 frank frank 4096 Sep 13 11:39 plugins >>>>> -rw-r--r-- 1 frank frank 886 Jul 19 2012 README >>>>> drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 src >>>>> -rw-r--r-- 1 frank frank 23 Sep 13 11:39 stamp-h1 >>>>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 test >>>>> -rwxr-xr-x 1 frank frank 4287 Sep 13 2015 test-driver >>>>> -rw-r--r-- 1 frank frank 17996 May 3 2016 TODO >>>>> drwxr-xr-x 2 frank frank 4096 Oct 5 2017 tools >>>>> drwxr-xr-x 4 frank frank 4096 Sep 13 11:39 unit >>>>> >>>>> Cheers, >>>>> Frank >>>>> >>>>> >>>>> >>>>> On Thu, Sep 13, 2018 at 11:48 AM Giacinto Cifelli <gciofono(a)gmail.com&gt; >>>>> wrote: >>>>> >>>>>> hi Frank, >>>>>> >>>>>> your modem doesn't seem to be supported. >>>>>> There are these models: >>>>>> SARA_G270 = 1102, >>>>>> TOBYL2_COMPATIBLE_MODE = 1141, >>>>>> TOBYL2_MEDIUM_THROUGHPUT_MODE = 1143, >>>>>> TOBYL2_HIGH_THROUGHPUT_MODE = 1146, >>>>>> If your model is compatible with any of them, I can add the 1107 >>>>>> for you for a test. >>>>>> >>>>>> from the PID, I would say it should be intermediate between the >>>>>> SARA_G260 and the TOBYL2_COMPATIBLE_MODE. >>>>>> Most likely it will work this latter, but maybe not all features... >>>>>> >>>>>> Are you willing to test? >>>>>> >>>>>> Best regards, >>>>>> Giacinto >>>>>> >>>>>> >>>>>> >>>>>> On Thu, Sep 13, 2018 at 7:48 PM Frank Vasquez <frankv(a)helium.com&gt; >>>>>> wrote: >>>>>> >>>>>>> Hi Giacinto, >>>>>>> >>>>>>> > can you send the result of "lsusb" and "lsusb -t"? >>>>>>> >>>>>>> The usbutils version of lsusb is somewhat better. >>>>>>> >>>>>>> # lsusb >>>>>>> Bus 002 Device 001: ID 1d6b:0003 >>>>>>> Bus 001 Device 002: ID 1546:1107 >>>>>>> Bus 001 Device 001: ID 1d6b:0002 >>>>>>> # lsusb -t >>>>>>> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M >>>>>>> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M >>>>>>> |__ Port 1: Dev 2, If 0, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 1, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 2, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 3, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 4, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 5, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 6, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 7, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 8, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 9, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 10, Class=, Driver=cdc_acm, 480M >>>>>>> |__ Port 1: Dev 2, If 11, Class=, Driver=cdc_acm, 480M >>>>>>> >>>>>>> And here is a relevant excerpt from lsusb -v. >>>>>>> >>>>>>> Bus 001 Device 002: ID 1546:1107 >>>>>>> Device Descriptor: >>>>>>> bLength 18 >>>>>>> bDescriptorType 1 >>>>>>> bcdUSB 2.00 >>>>>>> bDeviceClass 239 >>>>>>> bDeviceSubClass 2 >>>>>>> bDeviceProtocol 1 >>>>>>> bMaxPacketSize0 64 >>>>>>> idVendor 0x1546 >>>>>>> idProduct 0x1107 >>>>>>> bcdDevice 17.29 >>>>>>> iManufacturer 1 u-blox >>>>>>> iProduct 2 u-blox Cellular Module >>>>>>> iSerial 3 352848080392646 >>>>>>> bNumConfigurations 1 >>>>>>> Configuration Descriptor: >>>>>>> bLength 9 >>>>>>> bDescriptorType 2 >>>>>>> wTotalLength 405 >>>>>>> bNumInterfaces 12 >>>>>>> bConfigurationValue 1 >>>>>>> iConfiguration 0 >>>>>>> bmAttributes 0xe0 >>>>>>> Self Powered >>>>>>> Remote Wakeup >>>>>>> MaxPower 100mA >>>>>>> Interface Association: >>>>>>> bLength 8 >>>>>>> bDescriptorType 11 >>>>>>> bFirstInterface 0 >>>>>>> bInterfaceCount 2 >>>>>>> bFunctionClass 2 >>>>>>> bFunctionSubClass 2 >>>>>>> bFunctionProtocol 1 >>>>>>> iFunction 4 CDC ACM >>>>>>> ... >>>>>>> >>>>>>> Cheers, >>>>>>> Frank >>>>>>> >>>>>>> >>>>>>> On Thu, Sep 13, 2018 at 10:21 AM Frank Vasquez <frankv(a)helium.com&gt; >>>>>>> wrote: >>>>>>> >>>>>>>> Hi Giacinto, >>>>>>>> >>>>>>>> > can you send the result of "lsusb" and "lsusb -t"? >>>>>>>> >>>>>>>> # lsusb -t >>>>>>>> Bus 001 Device 001: ID 1d6b:0002 >>>>>>>> Bus 001 Device 002: ID 1546:1107 >>>>>>>> Bus 002 Device 001: ID 1d6b:0003 >>>>>>>> >>>>>>>> I am running BusyBox's stripped down version of lsusb that's why >>>>>>>> information is so lacking. >>>>>>>> I'll install usbutils on my device's Buildroot image and rerun the >>>>>>>> commands. >>>>>>>> >>>>>>>> Cheers, >>>>>>>> Frank >>>>>>>> >>>>>>>> On Thu, Sep 13, 2018 at 3:49 AM Giacinto Cifelli < >>>>>>>> gciofono(a)gmail.com&gt; wrote: >>>>>>>> >>>>>>>>> hi Frank, >>>>>>>>> >>>>>>>>> can you send the result of "lsusb" and "lsusb -t"? >>>>>>>>> >>>>>>>>> Giacinto >>>>>>>>> >>>>>>>>> On Thu, 13 Sep 2018, 00:41 Frank Vasquez, <frankv(a)helium.com&gt; >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Greetings, >>>>>>>>>> >>>>>>>>>> I have an embedded device with a ublox TOBY-R200 on it. I want >>>>>>>>>> to use connman to manage any cellular connection on that modem since >>>>>>>>>> connman is already managing ethernet and wifi connectivity. oFono seems >>>>>>>>>> like the best option. I see that there is already a ublox plugin for oFono >>>>>>>>>> but I don't think the TOBY-R200 is supported. The cell module is soldered >>>>>>>>>> onto the board and appears as a USB device. >>>>>>>>>> >>>>>>>>>> [ 6.519190] usb 1-1: New USB device strings: Mfr=1, >>>>>>>>>> Product=2, SerialNumber=3 >>>>>>>>>> [ 6.519197] usb 1-1: Product: u-blox Cellular Module >>>>>>>>>> [ 6.519204] usb 1-1: Manufacturer: u-blox >>>>>>>>>> [ 6.519211] usb 1-1: SerialNumber: 352848080392646 >>>>>>>>>> >>>>>>>>>> I can send AT commands to the modem over /dev/ttyACM0. >>>>>>>>>> >>>>>>>>>> Cheers, >>>>>>>>>> Frank >>>>>>>>>> _______________________________________________ >>>>>>>>>> ofono mailing list >>>>>>>>>> ofono(a)ofono.org >>>>>>>>>> https://lists.ofono.org/mailman/listinfo/ofono >>>>>>>>>> >>>>>>>>>