12:11 a.m.
+ adding ofono mailinglist as it may be of interest
Point is, that I am trying to run the u-blox on ofono+connman and
had/have some questions regarding the setup.
I compiled the git version of the ofono for a freescale vf610 board with
an onboard ublox usb adapter and got quite far.
A manual setup on pppd+peer+provider+chat script gave me a clean
internet connection.
Now I want to integrate that with ofono/connman. I got ofono finding the
module, advertise it as a cellular technology to connman, but no service
is showing up.
I will go on setting up the umts high throughput profile.
So the rest of the story can be found below!
@Dragos:
without any changes, I got
lsusb:
1546:1146 U-Blox AG (which is high performance?)
online modem runs without any complains, but without any changes
root@colibri-vf:~/test# ./online-modem
Setting modem /ublox_0 online...
BR - Yorn (Jörn)
Am 20.04.2016 um 15:16 schrieb Dragos Tatulea:
Hi Jörn,
Can we take this discussion to the connman/ofono ml? Other people
might find this useful.
On 04/20/2016 03:01 PM, Jörn wrote:
> Hi Dragos,
>
> I got python to work for the test scripts, this is what it gave [1]. I believe I am
just a minute away ..
>
Good.
> I got the connection up and running on a manual (old fassioned) way with pppd, chat
and provider script. However I am not an expert on ofono/connman yet (but trying hard
...).
>
> I firstly wanted to use 2g/3g with high performance mode (as I saw your effort has
been put on this point, right?). I am rather not sure, how to configure that without
having a connman service.
The AT Commands Examples [1] documents that (USB configuration section).
You should change the mode manually. A successful set will yield the
following ids from lsusb:
1546:1140 U-Blox AG
> BR - Jörn
>
> [1]
> root@colibri-vf:~/test# ./activate-context
> Error activating /ublox_0/context1: org.ofono.Error.NotAttached: GPRS is not
attached
> root@colibri-vf:~/test# ./list-contexts
> [ /ublox_0 ]
> [ /ublox_0/context1 ]
> Username =
> AuthenticationMethod = chap
> Protocol = ip
> Name = Internet
> Settings = { }
> IPv6.Settings = { }
> Active = 0
> AccessPointName =
> Password =
> Type = internet
>
> root@colibri-vf:~/test# ./list-modems
> [ /ublox_0 ]
> Features = net gprs sim
> Emergency = 0
> Powered = 1
> Lockdown = 0
> Interfaces = org.ofono.NetworkRegistration org.ofono.ConnectionManager
org.ofono.SimManager
> Online = 1
> Model = TOBY-L210
> Revision = 09.71
> Type = hardware
> Serial = 352255060097262
> Manufacturer = u-blox
> [ org.ofono.NetworkRegistration ]
> Status = roaming
> Strength = 60
> Name = Tele2 M2M (E-Plus)
> LocationAreaCode = 0
> Mode = auto
> MobileCountryCode = 262
> Technology = hspa
> CellId = 16
> MobileNetworkCode = 03
> [ org.ofono.ConnectionManager ]
> Powered = 1
> Attached = 0
> Bearer = none
> RoamingAllowed = 0
> [ org.ofono.SimManager ]
> ServiceProviderName = Tele2 M2M
> Retries = [pin2 = 3] [puk2 = 10] [pin = 3] [puk = 10]
> MobileCountryCode = 240
> FixedDialing = 0
> SubscriberNumbers =
> PreferredLanguages = en
> BarredDialing = 0
> CardIdentifier = 89462046051001005763
> LockedPins =
> MobileNetworkCode = 07
> SubscriberIdentity = 240075810199181
> Present = 1
> PinRequired = none
>
>
Hmm, not sure what the roaming state is. But it looks like it's not yet
ready to attach the gprs context (Attached is not yet 1).
Can you try running online-modem script? Maybe it will work.
>
> Am 20.04.2016 um 12:59 schrieb Dragos Tatulea:
>> Hi Jörn,
>>
>> On 04/20/2016 12:02 PM, Jörn wrote:
>>> Hi Dragos,
>>>
>>> thanks for your quick reply!
>>>
>>> What I did is the following:
>>>
>>> connmanctl> enable cellular
>>> Error cellular: Already enabled <- due to the second time
>>> cconnmanctl> technologies
>>> /net/connman/technology/cellular
>>> Name = Cellular
>>> Type = cellular
>>> Powered = True
>>> Connected = False
>>> Tethering = False
>>> /net/connman/technology/ethernet
>>> Name = Wired
>>> Type = ethernet
>>> Powered = True
>>> Connected = True
>>> Tethering = False
>>> connmanctl> services
>>> *AO Wired ethernet_00142d4ac28f_cable
>>>
>>> Is there something else to activate?
>>>
>>> I am actually trying to transfer the python test scripts to my embedded
system, but there is no python3 available on open embedded, and so I do not have dbus
access from there :(.
>>>
>> The python scripts are really useful. Especially to investigate the state
>> of oFono. See list-modems and list-contexts.
>>
>>> I am not sure, what a context is...
>>>
>> A context is oFono's concept of a "connection to internet" :). For
2/3G there
>> are 3 states to enable the internet connection:
>> * enable the modem (done by connman in your case)
>> * register to the network (might be done by connman, list-modems will
>> help you debug that)
>> * activate context (sometimes done by connman, list-contexts will
>> tell you the state of the context)
>>
>>
>>> BR - Jörn
>>>
>>>
>>> Am 20.04.2016 um 11:20 schrieb Dragos Tatulea:
>>>> Hi Jörn,
>>>>
>>>> On 04/20/2016 09:44 AM, Jörn wrote:
>>>>> Hi Dragos
>>>>>
>>>>> I saw, you wrote some code for the toby ublox modem on ofono.
>>>>> I am actually setting up an embedded system using that modem and got
some issues with the latest ofono git and connman.
>>>>>
>>>>> The ofono deamon seem to recognize the modem and connman shows the
cellular technologie but there is no service shown on connman.
>>>>>
>>>> Are you using LTE or 2/3G? If 2/3G, did you activate the context?
Connman
>>>> will create a service for every activated context.
>>>>
>> So, are you using LTE or 2/3G? And also, which version of Toby are you
>> using and in which mode (high throughput, fairly compatible or backward
>> compatible). We used only high throughput mode so far.
>>
>> Thanks
Once again, let's move the discussion to the mailing list please.
[1] -
https://www.u-blox.com/sites/default/files/AT-CommandsExamples_AppNote_(U...
Thanks
12:18 a.m.
New subject: Ublox Toby Modem
Hi,
On 04/20/2016 04:11 PM, Yorn wrote:
+ adding ofono mailinglist as it may be of interest
Thanks.
Point is, that I am trying to run the u-blox on ofono+connman and
had/have some questions regarding the setup.
I compiled the git version of the ofono for a freescale vf610 board with an onboard ublox
usb adapter and got quite far.
A manual setup on pppd+peer+provider+chat script gave me a clean internet connection.
Now I want to integrate that with ofono/connman. I got ofono finding the module,
advertise it as a cellular technology to connman, but no service is showing up.
I will go on setting up the umts high throughput profile.
So the rest of the story can be found below!
@Dragos:
without any changes, I got
lsusb:
1546:1146 U-Blox AG (which is high performance?)
Good. Now we're on stable grounds :).
online modem runs without any complains, but without any changes
root@colibri-vf:~/test# ./online-modem
Setting modem /ublox_0 online...
Can you check the output of list-contexts now? You should see one active.
And if that is so, you should also see a connman cellular service present.
BR - Yorn (Jörn)
Am 20.04.2016 um 15:16 schrieb Dragos Tatulea:
> Hi Jörn,
>
> Can we take this discussion to the connman/ofono ml? Other people
> might find this useful.
>
> On 04/20/2016 03:01 PM, Jörn wrote:
>> Hi Dragos,
>>
>> I got python to work for the test scripts, this is what it gave [1]. I believe I
am just a minute away ..
>>
> Good.
>
>> I got the connection up and running on a manual (old fassioned) way with pppd,
chat and provider script. However I am not an expert on ofono/connman yet (but trying hard
...).
>>
>> I firstly wanted to use 2g/3g with high performance mode (as I saw your effort
has been put on this point, right?). I am rather not sure, how to configure that without
having a connman service.
> The AT Commands Examples [1] documents that (USB configuration section).
> You should change the mode manually. A successful set will yield the
> following ids from lsusb:
>
> 1546:1140 U-Blox AG
>
>
>> BR - Jörn
>>
>> [1]
>> root@colibri-vf:~/test# ./activate-context
>> Error activating /ublox_0/context1: org.ofono.Error.NotAttached: GPRS is not
attached
>> root@colibri-vf:~/test# ./list-contexts
>> [ /ublox_0 ]
>> [ /ublox_0/context1 ]
>> Username =
>> AuthenticationMethod = chap
>> Protocol = ip
>> Name = Internet
>> Settings = { }
>> IPv6.Settings = { }
>> Active = 0
>> AccessPointName =
>> Password =
>> Type = internet
>>
>> root@colibri-vf:~/test# ./list-modems
>> [ /ublox_0 ]
>> Features = net gprs sim
>> Emergency = 0
>> Powered = 1
>> Lockdown = 0
>> Interfaces = org.ofono.NetworkRegistration org.ofono.ConnectionManager
org.ofono.SimManager
>> Online = 1
>> Model = TOBY-L210
>> Revision = 09.71
>> Type = hardware
>> Serial = 352255060097262
>> Manufacturer = u-blox
>> [ org.ofono.NetworkRegistration ]
>> Status = roaming
>> Strength = 60
>> Name = Tele2 M2M (E-Plus)
>> LocationAreaCode = 0
>> Mode = auto
>> MobileCountryCode = 262
>> Technology = hspa
>> CellId = 16
>> MobileNetworkCode = 03
>> [ org.ofono.ConnectionManager ]
>> Powered = 1
>> Attached = 0
>> Bearer = none
>> RoamingAllowed = 0
>> [ org.ofono.SimManager ]
>> ServiceProviderName = Tele2 M2M
>> Retries = [pin2 = 3] [puk2 = 10] [pin = 3] [puk = 10]
>> MobileCountryCode = 240
>> FixedDialing = 0
>> SubscriberNumbers =
>> PreferredLanguages = en
>> BarredDialing = 0
>> CardIdentifier = 89462046051001005763
>> LockedPins =
>> MobileNetworkCode = 07
>> SubscriberIdentity = 240075810199181
>> Present = 1
>> PinRequired = none
>>
>>
Thanks
--
Dragos Tatulea
Software Developer @ Endocode AG
dragos(a)endocode.com
Endocode AG, Brückenstraße 5A, 10179 Berlin
+49 30 1206 4472 | info(a)endocode.com | www.endocode.com
Vorstandsvorsitzender: Mirko Boehm
Vorstände: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm
Registergericht: Amtsgericht Charlottenburg - HRB 150748 B
12:24 a.m.
New subject: Ublox Toby Modem
Hi Dragos,
it is still active=0 :(
root@colibri-vf:~/test# ./list-contexts
[ /ublox_0 ]
[ /ublox_0/context1 ]
Username =
AuthenticationMethod = chap
Protocol = ip
Name = Internet
Settings = { }
IPv6.Settings = { }
Active = 0
AccessPointName =
Password =
Type = internet
BR- Yorn
Am 20.04.2016 um 16:18 schrieb Dragos Tatulea:
Hi,
On 04/20/2016 04:11 PM, Yorn wrote:
> + adding ofono mailinglist as it may be of interest
>
Thanks.
> Point is, that I am trying to run the u-blox on ofono+connman and had/have some
questions regarding the setup.
> I compiled the git version of the ofono for a freescale vf610 board with an onboard
ublox usb adapter and got quite far.
>
> A manual setup on pppd+peer+provider+chat script gave me a clean internet
connection.
>
> Now I want to integrate that with ofono/connman. I got ofono finding the module,
advertise it as a cellular technology to connman, but no service is showing up.
>
> I will go on setting up the umts high throughput profile.
>
> So the rest of the story can be found below!
>
> @Dragos:
> without any changes, I got
> lsusb:
> 1546:1146 U-Blox AG (which is high performance?)
>
Good. Now we're on stable grounds :).
> online modem runs without any complains, but without any changes
> root@colibri-vf:~/test# ./online-modem
> Setting modem /ublox_0 online...
>
Can you check the output of list-contexts now? You should see one active.
And if that is so, you should also see a connman cellular service present.
> BR - Yorn (Jörn)
>
>
> Am 20.04.2016 um 15:16 schrieb Dragos Tatulea:
>> Hi Jörn,
>>
>> Can we take this discussion to the connman/ofono ml? Other people
>> might find this useful.
>>
>> On 04/20/2016 03:01 PM, Jörn wrote:
>>> Hi Dragos,
>>>
>>> I got python to work for the test scripts, this is what it gave [1]. I
believe I am just a minute away ..
>>>
>> Good.
>>
>>> I got the connection up and running on a manual (old fassioned) way with
pppd, chat and provider script. However I am not an expert on ofono/connman yet (but
trying hard ...).
>>>
>>> I firstly wanted to use 2g/3g with high performance mode (as I saw your
effort has been put on this point, right?). I am rather not sure, how to configure that
without having a connman service.
>> The AT Commands Examples [1] documents that (USB configuration section).
>> You should change the mode manually. A successful set will yield the
>> following ids from lsusb:
>>
>> 1546:1140 U-Blox AG
>>
>>
>>> BR - Jörn
>>>
>>> [1]
>>> root@colibri-vf:~/test# ./activate-context
>>> Error activating /ublox_0/context1: org.ofono.Error.NotAttached: GPRS is not
attached
>>> root@colibri-vf:~/test# ./list-contexts
>>> [ /ublox_0 ]
>>> [ /ublox_0/context1 ]
>>> Username =
>>> AuthenticationMethod = chap
>>> Protocol = ip
>>> Name = Internet
>>> Settings = { }
>>> IPv6.Settings = { }
>>> Active = 0
>>> AccessPointName =
>>> Password =
>>> Type = internet
>>>
>>> root@colibri-vf:~/test# ./list-modems
>>> [ /ublox_0 ]
>>> Features = net gprs sim
>>> Emergency = 0
>>> Powered = 1
>>> Lockdown = 0
>>> Interfaces = org.ofono.NetworkRegistration org.ofono.ConnectionManager
org.ofono.SimManager
>>> Online = 1
>>> Model = TOBY-L210
>>> Revision = 09.71
>>> Type = hardware
>>> Serial = 352255060097262
>>> Manufacturer = u-blox
>>> [ org.ofono.NetworkRegistration ]
>>> Status = roaming
>>> Strength = 60
>>> Name = Tele2 M2M (E-Plus)
>>> LocationAreaCode = 0
>>> Mode = auto
>>> MobileCountryCode = 262
>>> Technology = hspa
>>> CellId = 16
>>> MobileNetworkCode = 03
>>> [ org.ofono.ConnectionManager ]
>>> Powered = 1
>>> Attached = 0
>>> Bearer = none
>>> RoamingAllowed = 0
>>> [ org.ofono.SimManager ]
>>> ServiceProviderName = Tele2 M2M
>>> Retries = [pin2 = 3] [puk2 = 10] [pin = 3] [puk = 10]
>>> MobileCountryCode = 240
>>> FixedDialing = 0
>>> SubscriberNumbers =
>>> PreferredLanguages = en
>>> BarredDialing = 0
>>> CardIdentifier = 89462046051001005763
>>> LockedPins =
>>> MobileNetworkCode = 07
>>> SubscriberIdentity = 240075810199181
>>> Present = 1
>>> PinRequired = none
>>>
>>>
Thanks
1:01 a.m.
New subject: Ublox Toby Modem
Hi Yorn,
On 04/20/2016 04:24 PM, Yorn wrote:
Hi Dragos,
it is still active=0 :(
root@colibri-vf:~/test# ./list-contexts
[ /ublox_0 ]
[ /ublox_0/context1 ]
Username =
AuthenticationMethod = chap
Protocol = ip
Name = Internet
Settings = { }
IPv6.Settings = { }
Active = 0
AccessPointName =
Password =
Type = internet
Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
and run the following scripts:
enable-modem
online-modem
activate-context
Then send the logs.
Thanks
--
Dragos Tatulea
Software Developer @ Endocode AG
dragos(a)endocode.com
Endocode AG, Brückenstraße 5A, 10179 Berlin
+49 30 1206 4472 | info(a)endocode.com | www.endocode.com
Vorstandsvorsitzender: Mirko Boehm
Vorstände: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm
Registergericht: Amtsgericht Charlottenburg - HRB 150748 B
3:54 a.m.
New subject: Ublox Toby Modem
Hi Dragos,
logs + comments inline
Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
Hi Yorn,
On 04/20/2016 04:24 PM, Yorn wrote:
> Hi Dragos,
>
> it is still active=0 :(
>
> root@colibri-vf:~/test# ./list-contexts
> [ /ublox_0 ]
> [ /ublox_0/context1 ]
> Username =
> AuthenticationMethod = chap
> Protocol = ip
> Name = Internet
> Settings = { }
> IPv6.Settings = { }
> Active = 0
> AccessPointName =
> Password =
> Type = internet
>
Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
and run the following scripts:
enable-modem
online-modem
activate-context
Then send the logs.
Here they are [1]
I set the context information now as follows:
root@colibri-vf:~/test# ./list-contexts
[ /ublox_0 ]
[ /ublox_0/context1 ]
Username = eplus
AuthenticationMethod = chap
Protocol = ip
Name = Internet
Settings = { }
IPv6.Settings = { }
Active = 0
AccessPointName = m2m.tele2.com
Password =
Type = internet
I would expect AT Commands like this, however, I am not a modem AT
command expert, so this is more or less taken from a tutorial (which set
up my manual environment successfully)
AT+COPS?
AT+CGDCONT=1,"IP","m2m.tele2.com"
ATD*99***1#
AT+CGACT=1,1
AT+CGDATA="PPP",1
CONNECT ""
But I do not really find them in the logs.
There are some modem errors return.
BR - Yorn
[1]
ofonod[6749]: plugins/ublox.c:open_device() Aux /dev/ttyACM0
ofonod[6749]: Aux: > AT\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: Finally woke up the modem
ofonod[6749]: Aux: > ATE0 +CMEE=1\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CFUN=4\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: plugins/ublox.c:cfun_enable() ok 1
ofonod[6749]: src/modem.c:modem_change_state() old state: 0, new state: 1
ofonod[6749]: plugins/ublox.c:ublox_pre_sim() 0x1cf0680
ofonod[6749]: Aux: > AT+UBMCONF=2\r
ofonod[6749]: src/sim.c:ofono_sim_add_state_watch() 0x1ccc810
ofonod[6749]: src/sim.c:ofono_sim_add_state_watch() 0x1ccc810
ofonod[6749]: src/sim.c:ofono_sim_add_state_watch() 0x1ccc810
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+GCAP\r
ofonod[6749]: Aux: < \r\n+GCAP: +CGSM\r\n\r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=192,12258\r
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"62178202412183022FE28A01058B032F06078002000A880110"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_info_cb() crsm_info_cb: 90,
00, 25
ofonod[6749]: Aux: > AT+CGMI\r
ofonod[6749]: Aux: < \r\nu-blox\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=176,12258,0,0,10\r
ofonod[6749]: Aux: < \r\n+CRSM: 144,0,"98640264500110007536"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_read_cb() crsm_read_cb: 90,
00, 10
ofonod[6749]: src/simfs.c:sim_fs_op_read_block_cb() bufoff: 0, dataoff:
0, tocopy: 10
ofonod[6749]: Aux: > AT+CGMM\r
ofonod[6749]: Aux: < \r\nTOBY-L210\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=192,28421\r
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"62178202412183026F058A01058B036F060480020008880110"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_info_cb() crsm_info_cb: 90,
00, 25
ofonod[6749]: Aux: > AT+CGMR\r
ofonod[6749]: Aux: < \r\n09.71\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=176,28421,0,0,8\r
ofonod[6749]: Aux: < \r\n+CRSM: 144,0,"FFFFFFFFFFFFFFFF"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_read_cb() crsm_read_cb: 90,
00, 8
ofonod[6749]: src/simfs.c:sim_fs_op_read_block_cb() bufoff: 0, dataoff:
0, tocopy: 8
ofonod[6749]: Aux: > AT+CGSN\r
ofonod[6749]: Aux: < \r\n352255060097262\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=192,12037\r
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"62178202412183022F058A01058B032F06068002000C880128"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_info_cb() crsm_info_cb: 90,
00, 25
ofonod[6749]: Aux: > AT+CRSM=176,12037,0,0,12\r
ofonod[6749]: Aux: < \r\n+CRSM: 144,0,"656EFFFFFFFFFFFFFFFFFFFF"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_read_cb() crsm_read_cb: 90,
00, 12
ofonod[6749]: src/simfs.c:sim_fs_op_read_block_cb() bufoff: 0, dataoff:
0, tocopy: 12
ofonod[6749]: Aux: > AT+CPIN?\r
ofonod[6749]: Aux: < \r\n+CPIN: READY\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_cpin_cb() crsm_pin_cb: READY
ofonod[6749]: src/sim.c:sim_pin_query_cb() sim->pin_type: 0, pin_type: 0
ofonod[6749]: drivers/atmodem/sim.c:at_pin_retries_query()
ofonod[6749]: Aux: > AT+UPINCNT\r
ofonod[6749]: Aux: < \r\n+UPINCNT: 3,3,10,10\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:upincnt_cb() retry counter id=1, val=3
ofonod[6749]: drivers/atmodem/sim.c:upincnt_cb() retry counter id=4, val=3
ofonod[6749]: drivers/atmodem/sim.c:upincnt_cb() retry counter id=9, val=10
ofonod[6749]: drivers/atmodem/sim.c:upincnt_cb() retry counter id=11, val=10
ofonod[6749]: Aux: > AT+CRSM=192,28590\r
ofonod[6749]: Aux: < \r\n+CRSM: 106,130\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=192,28589\r
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"62178202412183026FAD8A01058B036F060B80020004880118"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_info_cb() crsm_info_cb: 90,
00, 25
ofonod[6749]: Aux: > AT+CRSM=176,28589,0,0,4\r
ofonod[6749]: Aux: < \r\n+CRSM: 144,0,"00000102"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_read_cb() crsm_read_cb: 90,
00, 4
ofonod[6749]: src/simfs.c:sim_fs_op_read_block_cb() bufoff: 0, dataoff:
0, tocopy: 4
ofonod[6749]: Aux: > AT+CRSM=192,28438\r
ofonod[6749]: Aux: < \r\n+CRSM: 106,130\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=192,28472\r
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"62178202412183026F388A01058B036F06058002000C880120"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_info_cb() crsm_info_cb: 90,
00, 25
ofonod[6749]: Aux: > AT+CRSM=176,28472,0,0,12\r
ofonod[6749]: Aux: < \r\n+CRSM: 144,0,"06FA1CAC213E040040011000"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_read_cb() crsm_read_cb: 90,
00, 12
ofonod[6749]: src/simfs.c:sim_fs_op_read_block_cb() bufoff: 0, dataoff:
0, tocopy: 12
ofonod[6749]: Aux: > AT+CRSM=192,28502\r
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"62178202412183026F568A01058B036F060A80020001880128"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_info_cb() crsm_info_cb: 90,
00, 25
ofonod[6749]: Aux: > AT+CRSM=176,28502,0,0,1\r
ofonod[6749]: Aux: < \r\n+CRSM: 144,0,"00"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_read_cb() crsm_read_cb: 90,
00, 1
ofonod[6749]: src/simfs.c:sim_fs_op_read_block_cb() bufoff: 0, dataoff:
0, tocopy: 1
ofonod[6749]: Aux: > AT+CIMI\r
ofonod[6749]: Aux: < \r\n240075810199181\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_cimi_cb() cimi_cb: 240075810199181
ofonod[6749]: src/modem.c:modem_change_state() old state: 1, new state: 2
ofonod[6749]: plugins/ublox.c:ublox_post_sim() 0x1cf0680
ofonod[6749]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_context_probe()
ofonod[6749]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_context_probe()
ofonod[6749]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_context_probe()
ofonod[6749]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_context_probe()
ofonod[6749]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_context_probe()
ofonod[6749]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_context_probe()
ofonod[6749]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_context_probe()
ofonod[6749]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_context_probe()
ofonod[6749]: src/modem.c:get_modem_property() modem 0x1cf0680 property
AlwaysOnline
ofonod[6749]: Aux: > AT+CGDCONT=?\r
ofonod[6749]: Aux: < \r\n+CGDCONT:
(1-8),"IP",,,(0-2),(0-2),(0,1),(0,1),(0-2),(0,1)\r\n+CGDCONT:
(1-8),"IPV6",,,(0-2),(0-2),(0,1),(0,1),(0-2),(0,1)\r\n+CGDCONT:
(1-8),"IPV4V6",,,(0-2),(0-2),(0,1),(0,1),(0-2),(0,1)\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=192,28480\r
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"62198205422100220283026F408A01058B036F0606800200448800"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_info_cb() crsm_info_cb: 90,
00, 27
ofonod[6749]: Aux: > AT+CGREG=?\r
ofonod[6749]: Aux: < \r\n+CGREG: (0-2)\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=178,28480,1,4,34\r
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_read_cb() crsm_read_cb: 90,
00, 34
ofonod[6749]: Aux: > AT+CGREG=2\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CGAUTO=0\r
ofonod[6749]: Aux: < \r\n+CME ERROR: 100\r\n
ofonod[6749]: Aux: > AT+CGEREP=2,1\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: plugins/bluez5.c:bt_register_profile() Bluetooth:
Registering 00001103-0000-1000-8000-00805f9b34fb (dun_gw) profile
ofonod[6749]: Aux: > AT+CRSM=178,28480,2,4,34\r
ofonod[6749]: RegisterProfile() replied an error:
org.freedesktop.DBus.Error.UnknownMethod, Method "RegisterProfile" with
signature "osa{sv}" on interface "org.bluez.ProfileManager1"
doesn't exist
ofonod[6749]: Aux: < \r\n+CRSM:
144,0,"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/sim.c:at_crsm_read_cb() crsm_read_cb: 90,
00, 34
ofonod[6749]: Aux: > AT+UREG=1\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=192,28489\r
ofonod[6749]: Aux: < \r\n+CRSM: 106,130\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CRSM=192,20256\r
ofonod[6749]: Aux: < \r\n+CRSM: 106,130\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: src/modem.c:get_modem_property() modem 0x1cf0680 property
AlwaysOnline
ofonod[6749]: plugins/ublox.c:ublox_set_online() modem 0x1cf0680 online
ofonod[6749]: Aux: > AT\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: Finally woke up the modem
ofonod[6749]: Aux: > AT+CFUN=1\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: src/modem.c:modem_change_state() old state: 2, new state: 3
ofonod[6749]: Aux: > AT+CREG=?\r
ofonod[6749]: Aux: < \r\n+CREG: 2\r\n
ofonod[6749]: Aux: < \r\n+CREG: (0-2)\r\n\r\nOK\r\n
ofonod[6749]: Aux: > AT+CREG=2\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CIND=?\r
ofonod[6749]: Aux: < \r\n+CIND:
("battchg",(0-5)),("signal",(0-5)),("service",(0-1)),("sounder",(0-1)),("message",(0-1)),("call",(0-1)),("roam",(0-1)),("smsfull",(0-1)),("gprs",(0-2)),("callsetup",(0-3)),("callheld",(0-1)),("simind",(0-2))\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+CIND=0,1,0,0,0,0,0,0,0,0,0,0\r
ofonod[6749]: Aux: < \r\n+CME ERROR: 4\r\n
ofonod[6749]: Aux: > AT+CMER=?\r
ofonod[6749]: Aux: < \r\n+CMER: (0-1),(0),(0),(0-2),(0-1)\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/network-registration.c:build_cmer_string()
ofonod[6749]: Aux: > AT+CMER=1,0,0,1\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: src/sim.c:ofono_sim_add_spn_watch() 0x1ccc810
ofonod[6749]: src/network.c:__ofono_netreg_add_status_watch() 0x1ccb1d0
ofonod[6749]: src/gprs.c:gprs_netreg_update() attach: 0, driver_attached: 0
ofonod[6749]: Aux: > AT+CREG?\r
ofonod[6749]: src/simfs.c:sim_fs_op_read_block() bufoff: 0, seekoff: 39,
toread: 17
ofonod[6749]: Aux: < \r\n+CREG: 2,2\r\n\r\nOK\r\n
ofonod[6749]: src/network.c:ofono_netreg_status_notify() /ublox_0 status
2 tech -1
ofonod[6749]: src/network.c:current_operator_callback() 0x1ccb1d0, (nil)
ofonod[6749]: src/gprs.c:netreg_status_changed() 2
ofonod[6749]: src/gprs.c:gprs_netreg_update() attach: 0, driver_attached: 0
ofonod[6749]: src/simfs.c:sim_fs_op_read_block() bufoff: 0, seekoff: 39,
toread: 34
ofonod[6749]: Aux: > AT+CRSM=192,28437\r
ofonod[6749]: Aux: < \r\n+CRSM: 106,130\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: < \r\n+CREG: 5,"0000","00000000",4\r\n
ofonod[6749]: src/network.c:ofono_netreg_status_notify() /ublox_0 status
5 tech 4
ofonod[6749]: src/gprs.c:netreg_status_changed() 5
ofonod[6749]: src/gprs.c:gprs_netreg_update() attach: 0, driver_attached: 0
ofonod[6749]: Aux: > AT+COPS=3,2\r
ofonod[6749]: Aux: < \r\n+CIEV: 7,1\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+COPS?\r
ofonod[6749]: Aux: < \r\n+COPS: 0,2,"26203",4\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/network-registration.c:cops_numeric_cb()
Cops numeric got mcc: 262, mnc: 03
ofonod[6749]: Aux: > AT+CIND?\r
ofonod[6749]: Aux: < \r\n+CIND: 5,3,0,0,0,0,1,0,1,0,0,1\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: src/network.c:ofono_netreg_strength_notify() strength 60
ofonod[6749]: Aux: > AT+COPS=3,0\r
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: Aux: > AT+COPS?\r
ofonod[6749]: Aux: < \r\n+COPS: 0,0,"E-Plus",4\r\n
ofonod[6749]: Aux: < \r\nOK\r\n
ofonod[6749]: drivers/atmodem/network-registration.c:cops_cb() cops_cb:
E-Plus, 262 03 4
ofonod[6749]: src/network.c:current_operator_callback() 0x1ccb1d0, (nil)
ofonod[6749]: src/gprs.c:netreg_status_changed() 5
ofonod[6749]: src/gprs.c:gprs_netreg_update() attach: 0, driver_attached: 0
ofonod[6749]: Aux: < \r\n+CIEV: 2,2\r\n
ofonod[6749]: src/network.c:ofono_netreg_strength_notify() strength 40
ofonod[6749]: Aux: < \r\n+CIEV: 2,3\r\n
ofonod[6749]: src/network.c:ofono_netreg_strength_notify() strength 60
ofonod[6749]: Aux: < \r\n+CIEV: 2,2\r\n
ofonod[6749]: src/network.c:ofono_netreg_strength_notify() strength 40
ofonod[6749]: Aux: < \r\n+CIEV: 2,3\r\n
ofonod[6749]: src/network.c:ofono_netreg_strength_notify() strength 60
Thanks
7:03 p.m.
New subject: Ublox Toby Modem
Hi Yarn,
On 04/20/2016 07:54 PM, Yorn wrote:
Hi Dragos,
logs + comments inline
Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
> Hi Yorn,
>
> On 04/20/2016 04:24 PM, Yorn wrote:
>> Hi Dragos,
>>
>> it is still active=0 :(
>>
>> root@colibri-vf:~/test# ./list-contexts
>> [ /ublox_0 ]
>> [ /ublox_0/context1 ]
>> Username =
>> AuthenticationMethod = chap
>> Protocol = ip
>> Name = Internet
>> Settings = { }
>> IPv6.Settings = { }
>> Active = 0
>> AccessPointName =
>> Password =
>> Type = internet
>>
> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
> and run the following scripts:
>
> enable-modem
> online-modem
> activate-context
>
> Then send the logs.
Here they are [1]
I set the context information now as follows:
root@colibri-vf:~/test# ./list-contexts
[ /ublox_0 ]
[ /ublox_0/context1 ]
Username = eplus
AuthenticationMethod = chap
Protocol = ip
Name = Internet
Settings = { }
IPv6.Settings = { }
Active = 0
AccessPointName = m2m.tele2.com
Password =
Type = internet
Okay. That's good for the next step.
I would expect AT Commands like this, however, I am not a modem AT
command expert, so this is more or less taken from a tutorial (which set up my manual
environment successfully)
AT+COPS?
AT+CGDCONT=1,"IP","m2m.tele2.com"
ATD*99***1#
AT+CGACT=1,1
It never gets to do a context activation because the modem is not
gprs
attached (see Attached state). The reason for that seems to be the
RoamingAllowed property not being set to true/1. Try to set it to true
(set-roaming-allowed) and try again.
AT+CGDATA="PPP",1
CONNECT ""
Also, Toby doesn't use PPP in high throughput mode. It uses an ndis
interface (you should see a usbX interface popping up when inserting
the powered up modem on usb).
Thanks
--
Dragos Tatulea
Software Developer @ Endocode AG
dragos(a)endocode.com
Endocode AG, Brückenstraße 5A, 10179 Berlin
+49 30 1206 4472 | info(a)endocode.com | www.endocode.com
Vorstandsvorsitzender: Mirko Boehm
Vorstände: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm
Registergericht: Amtsgericht Charlottenburg - HRB 150748 B
8:06 p.m.
New subject: Ublox Toby Modem
Hi Dragos,
Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
Hi Yarn,
On 04/20/2016 07:54 PM, Yorn wrote:
> Hi Dragos,
>
> logs + comments inline
>
> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>> Hi Yorn,
>>
>> On 04/20/2016 04:24 PM, Yorn wrote:
>>> Hi Dragos,
>>>
>>> it is still active=0 :(
>>>
>>> root@colibri-vf:~/test# ./list-contexts
>>> [ /ublox_0 ]
>>> [ /ublox_0/context1 ]
>>> Username =
>>> AuthenticationMethod = chap
>>> Protocol = ip
>>> Name = Internet
>>> Settings = { }
>>> IPv6.Settings = { }
>>> Active = 0
>>> AccessPointName =
>>> Password =
>>> Type = internet
>>>
>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>> and run the following scripts:
>>
>> enable-modem
>> online-modem
>> activate-context
>>
>> Then send the logs.
> Here they are [1]
>
> I set the context information now as follows:
> root@colibri-vf:~/test# ./list-contexts
> [ /ublox_0 ]
> [ /ublox_0/context1 ]
> Username = eplus
> AuthenticationMethod = chap
> Protocol = ip
> Name = Internet
> Settings = { }
> IPv6.Settings = { }
> Active = 0
> AccessPointName = m2m.tele2.com
> Password =
> Type = internet
>
>
Okay. That's good for the next step.
> I would expect AT Commands like this, however, I am not a modem AT command expert, so
this is more or less taken from a tutorial (which set up my manual environment
successfully)
>
> AT+COPS?
> AT+CGDCONT=1,"IP","m2m.tele2.com"
> ATD*99***1#
> AT+CGACT=1,1
It never gets to do a context activation because the modem is not gprs
attached (see Attached state). The reason for that seems to be the
RoamingAllowed property not being set to true/1. Try to set it to true
(set-roaming-allowed) and try again.
great, that works!
connmanctl> services
*AO Wired ethernet_00142d4ac28f_cable
Tele2 M2M (E-Plus) cellular_240075810199181_context1
connmanctl> connect cellular_240075810199181_context1
connmanctl> services
*AO Wired ethernet_00142d4ac28f_cable
a Tele2 M2M (E-Plus) cellular_240075810199181_context1
Error /net/connman/service/cellular_240075810199181_context1: Did not
receive a reply. Possible causes include: the remote application did not
send a reply, the message bus security policy blocked the reply, the
reply timeout expired, or the network connection was broken.
now I just need to find out why connection is not done, I will have a
look at the ofono/AT logs
Do you have any *known* parameters to check? I originally use pap for
authentication and uses e-plus user/pw pair. There is no agent to help
me, right!?
Thanks - Yorn
> AT+CGDATA="PPP",1
> CONNECT ""
>
Also, Toby doesn't use PPP in high throughput mode. It uses an ndis
interface (you should see a usbX interface popping up when inserting
the powered up modem on usb).
Thanks
4:37 a.m.
New subject: Ublox Toby Modem
Hi Dragos
Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
Hi Yarn,
On 04/20/2016 07:54 PM, Yorn wrote:
> Hi Dragos,
>
> logs + comments inline
>
> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>> Hi Yorn,
>>
>> On 04/20/2016 04:24 PM, Yorn wrote:
>>> Hi Dragos,
>>>
>>> it is still active=0 :(
>>>
>>> root@colibri-vf:~/test# ./list-contexts
>>> [ /ublox_0 ]
>>> [ /ublox_0/context1 ]
>>> Username =
>>> AuthenticationMethod = chap
>>> Protocol = ip
>>> Name = Internet
>>> Settings = { }
>>> IPv6.Settings = { }
>>> Active = 0
>>> AccessPointName =
>>> Password =
>>> Type = internet
>>>
>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>> and run the following scripts:
>>
>> enable-modem
>> online-modem
>> activate-context
>>
>> Then send the logs.
> Here they are [1]
I am actually a bit lost in the ublox AT Commands manual..
Do you have a chance to see something at the ofonod+AT logs with your
expertice!?
The connman cellular service is set to "a" (association) from starting
connect cellular_240075810199181_context1
up until timeout.
Log is attached
May thanks in advance!
Yorn
8:23 p.m.
New subject: Ublox Toby Modem
Hi Yorn,
On 04/21/2016 08:37 PM, Yorn wrote:
Hi Dragos
Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
> Hi Yarn,
>
> On 04/20/2016 07:54 PM, Yorn wrote:
>> Hi Dragos,
>>
>> logs + comments inline
>>
>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>> Hi Yorn,
>>>
>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>> Hi Dragos,
>>>>
>>>> it is still active=0 :(
>>>>
>>>> root@colibri-vf:~/test# ./list-contexts
>>>> [ /ublox_0 ]
>>>> [ /ublox_0/context1 ]
>>>> Username =
>>>> AuthenticationMethod = chap
>>>> Protocol = ip
>>>> Name = Internet
>>>> Settings = { }
>>>> IPv6.Settings = { }
>>>> Active = 0
>>>> AccessPointName =
>>>> Password =
>>>> Type = internet
>>>>
>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>>> and run the following scripts:
>>>
>>> enable-modem
>>> online-modem
>>> activate-context
>>>
>>> Then send the logs.
>> Here they are [1]
I am actually a bit lost in the ublox AT Commands manual..
Do you have a chance to see something at the ofonod+AT logs with your expertice!?
oFono was able to register on the network an activate the context. This
part is interesting for you:
ofonod[369]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_activate_primary() cid 1
ofonod[369]: Aux: > AT\r
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: Aux: Finally woke up the modem
ofonod[369]: Aux: > AT+CGDCONT=1,"IP","m2m.tele2.com"\r
*> context defined
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgdcont_cb() ok 1
ofonod[369]: Aux: > AT+CGACT=1,1\r
*> context activated
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgact_enable_cb() ok 1
ofonod[369]: Aux: > AT+CGCONTRDP=1\r
ofonod[369]: Aux: < \r\n+CREG: 5,"0000","00000010",4\r\n\r\n+CGEV:
ME PDN ACT 1\r\n
ofonod[369]: src/network.c:ofono_netreg_status_notify() /ublox_0 status 5 tech 4
ofonod[369]: src/gprs.c:netreg_status_changed() 5
ofonod[369]: src/gprs.c:gprs_netreg_update() attach: 1, driver_attached: 1
ofonod[369]: Aux: < \r\n+CGCONTRDP: 1,0,"m2m.tele2.com","
ofonod[369]: Aux: <
100.98.55.207.255.255.255.255","100.98.55.207","130.244.127.161","130.244.127.169","0.0.0.0","0.0.0.0",0\r\n
ofonod[369]: Aux: < \r\nOK\r\n
*> connection properties read successfully
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgcontrdp_cb() ok 1
ofonod[369]: src/modem.c:get_modem_property() modem 0x192a900 property NetworkInterface
The connman cellular service is set to "a" (association)
from starting
connect cellular_240075810199181_context1
up until timeout.
Do you still run the oFono scripts? From the logs it looks like connman
is trying to activate an already active context.
As a side note, oFono and ConnMan have persistent states for services and
contexts. They are stored under /var/lib/ofono|connman. When debugging I
found it useful sometimes to start with a clean state.
Thanks
--
Dragos Tatulea
Software Developer @ Endocode AG
dragos(a)endocode.com
Endocode AG, Brückenstraße 5A, 10179 Berlin
+49 30 1206 4472 | info(a)endocode.com | www.endocode.com
Vorstandsvorsitzender: Mirko Boehm
Vorstände: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm
Registergericht: Amtsgericht Charlottenburg - HRB 150748 B
9:51 p.m.
New subject: Ublox Toby Modem
Hi Dragos,
many thanks for all the effort! Comments inline:
Am 22.04.2016 um 12:23 schrieb Dragos Tatulea:
Hi Yorn,
On 04/21/2016 08:37 PM, Yorn wrote:
> Hi Dragos
>
> Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
>> Hi Yarn,
>>
>> On 04/20/2016 07:54 PM, Yorn wrote:
>>> Hi Dragos,
>>>
>>> logs + comments inline
>>>
>>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>>> Hi Yorn,
>>>>
>>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>>> Hi Dragos,
>>>>>
>>>>> it is still active=0 :(
>>>>>
>>>>> root@colibri-vf:~/test# ./list-contexts
>>>>> [ /ublox_0 ]
>>>>> [ /ublox_0/context1 ]
>>>>> Username =
>>>>> AuthenticationMethod = chap
>>>>> Protocol = ip
>>>>> Name = Internet
>>>>> Settings = { }
>>>>> IPv6.Settings = { }
>>>>> Active = 0
>>>>> AccessPointName =
>>>>> Password =
>>>>> Type = internet
>>>>>
>>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>>>> and run the following scripts:
>>>>
>>>> enable-modem
>>>> online-modem
>>>> activate-context
>>>>
>>>> Then send the logs.
>>> Here they are [1]
> I am actually a bit lost in the ublox AT Commands manual..
>
> Do you have a chance to see something at the ofonod+AT logs with your expertice!?
>
oFono was able to register on the network an activate the context. This
part is interesting for you:
ofonod[369]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_activate_primary() cid 1
ofonod[369]: Aux: > AT\r
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: Aux: Finally woke up the modem
ofonod[369]: Aux: > AT+CGDCONT=1,"IP","m2m.tele2.com"\r
*> context defined
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgdcont_cb() ok 1
ofonod[369]: Aux: > AT+CGACT=1,1\r
*> context activated
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgact_enable_cb() ok 1
ofonod[369]: Aux: > AT+CGCONTRDP=1\r
ofonod[369]: Aux: < \r\n+CREG: 5,"0000","00000010",4\r\n\r\n+CGEV:
ME PDN ACT 1\r\n
ofonod[369]: src/network.c:ofono_netreg_status_notify() /ublox_0 status 5 tech 4
ofonod[369]: src/gprs.c:netreg_status_changed() 5
ofonod[369]: src/gprs.c:gprs_netreg_update() attach: 1, driver_attached: 1
ofonod[369]: Aux: < \r\n+CGCONTRDP: 1,0,"m2m.tele2.com","
ofonod[369]: Aux: <
100.98.55.207.255.255.255.255","100.98.55.207","130.244.127.161","130.244.127.169","0.0.0.0","0.0.0.0",0\r\n
ofonod[369]: Aux: < \r\nOK\r\n
*> connection properties read successfully
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgcontrdp_cb() ok 1
ofonod[369]: src/modem.c:get_modem_property() modem 0x192a900 property NetworkInterface
> The connman cellular service is set to "a" (association) from starting
> connect cellular_240075810199181_context1
> up until timeout.
>
Do you still run the oFono scripts? From the logs it looks like connman
is trying to activate an already active context.
The technologie and the service is
running, but the association does not
end successfully. Do I need to set something else in connman? Where do I
have to look?
The try to connect ends up with:
Error /net/connman/service/cellular_240075810199181_context1: Did not
receive a reply. Possible causes include: the remote application did not
send a reply, the message bus security policy blocked the reply, the
reply timeout expired, or the network connection was broken.
As a side note, oFono and ConnMan have persistent states for services and
contexts. They are stored under /var/lib/ofono|connman. When debugging I
found it useful sometimes to start with a clean state.
Thanks
1:36 a.m.
New subject: Ublox Toby Modem
Hi Yorn,
On 04/22/2016 01:51 PM, Yorn wrote:
Hi Dragos,
many thanks for all the effort! Comments inline:
Am 22.04.2016 um 12:23 schrieb Dragos Tatulea:
> Hi Yorn,
>
> On 04/21/2016 08:37 PM, Yorn wrote:
>> Hi Dragos
>>
>> Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
>>> Hi Yarn,
>>>
>>> On 04/20/2016 07:54 PM, Yorn wrote:
>>>> Hi Dragos,
>>>>
>>>> logs + comments inline
>>>>
>>>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>>>> Hi Yorn,
>>>>>
>>>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>>>> Hi Dragos,
>>>>>>
>>>>>> it is still active=0 :(
>>>>>>
>>>>>> root@colibri-vf:~/test# ./list-contexts
>>>>>> [ /ublox_0 ]
>>>>>> [ /ublox_0/context1 ]
>>>>>> Username =
>>>>>> AuthenticationMethod = chap
>>>>>> Protocol = ip
>>>>>> Name = Internet
>>>>>> Settings = { }
>>>>>> IPv6.Settings = { }
>>>>>> Active = 0
>>>>>> AccessPointName =
>>>>>> Password =
>>>>>> Type = internet
>>>>>>
>>>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable
set
>>>>> and run the following scripts:
>>>>>
>>>>> enable-modem
>>>>> online-modem
>>>>> activate-context
>>>>>
>>>>> Then send the logs.
>>>> Here they are [1]
>> I am actually a bit lost in the ublox AT Commands manual..
>>
>> Do you have a chance to see something at the ofonod+AT logs with your
expertice!?
>>
> oFono was able to register on the network an activate the context. This
> part is interesting for you:
>
> ofonod[369]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_activate_primary() cid 1
> ofonod[369]: Aux: > AT\r
> ofonod[369]: Aux: < \r\nOK\r\n
> ofonod[369]: Aux: Finally woke up the modem
> ofonod[369]: Aux: > AT+CGDCONT=1,"IP","m2m.tele2.com"\r
> *> context defined
>
> ofonod[369]: Aux: < \r\nOK\r\n
> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgdcont_cb() ok 1
> ofonod[369]: Aux: > AT+CGACT=1,1\r
> *> context activated
>
> ofonod[369]: Aux: < \r\nOK\r\n
> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgact_enable_cb() ok 1
> ofonod[369]: Aux: > AT+CGCONTRDP=1\r
> ofonod[369]: Aux: < \r\n+CREG:
5,"0000","00000010",4\r\n\r\n+CGEV: ME PDN ACT 1\r\n
> ofonod[369]: src/network.c:ofono_netreg_status_notify() /ublox_0 status 5 tech 4
> ofonod[369]: src/gprs.c:netreg_status_changed() 5
> ofonod[369]: src/gprs.c:gprs_netreg_update() attach: 1, driver_attached: 1
> ofonod[369]: Aux: < \r\n+CGCONTRDP: 1,0,"m2m.tele2.com","
> ofonod[369]: Aux: <
100.98.55.207.255.255.255.255","100.98.55.207","130.244.127.161","130.244.127.169","0.0.0.0","0.0.0.0",0\r\n
> ofonod[369]: Aux: < \r\nOK\r\n
> *> connection properties read successfully
>
> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgcontrdp_cb() ok 1
> ofonod[369]: src/modem.c:get_modem_property() modem 0x192a900 property
NetworkInterface
>
>> The connman cellular service is set to "a" (association) from starting
>> connect cellular_240075810199181_context1
>> up until timeout.
>>
> Do you still run the oFono scripts? From the logs it looks like connman
> is trying to activate an already active context.
The technologie and the service is running, but the association does not end
successfully. Do I need to set something else in connman? Where do I have to look?
The try to connect ends up with:
Error /net/connman/service/cellular_240075810199181_context1: Did not receive a reply.
Possible causes include: the remote application did not send a reply, the message bus
security policy blocked the reply, the reply timeout expired, or the network connection
was broken.
Can you send the connman logs as well? I'm not really sure what's
happening here.
Thanks
--
Dragos Tatulea
Software Developer @ Endocode AG
dragos(a)endocode.com
Endocode AG, Brückenstraße 5A, 10179 Berlin
+49 30 1206 4472 | info(a)endocode.com | www.endocode.com
Vorstandsvorsitzender: Mirko Boehm
Vorstände: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm
Registergericht: Amtsgericht Charlottenburg - HRB 150748 B
11:03 p.m.
New subject: Ublox Toby Modem
Hi Dragos,
Am 22.04.2016 um 17:36 schrieb Dragos Tatulea:
Hi Yorn,
On 04/22/2016 01:51 PM, Yorn wrote:
> Hi Dragos,
>
> many thanks for all the effort! Comments inline:
>
> Am 22.04.2016 um 12:23 schrieb Dragos Tatulea:
>> Hi Yorn,
>>
>> On 04/21/2016 08:37 PM, Yorn wrote:
>>> Hi Dragos
>>>
>>> Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
>>>> Hi Yarn,
>>>>
>>>> On 04/20/2016 07:54 PM, Yorn wrote:
>>>>> Hi Dragos,
>>>>>
>>>>> logs + comments inline
>>>>>
>>>>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>>>>> Hi Yorn,
>>>>>>
>>>>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>>>>> Hi Dragos,
>>>>>>>
>>>>>>> it is still active=0 :(
>>>>>>>
>>>>>>> root@colibri-vf:~/test# ./list-contexts
>>>>>>> [ /ublox_0 ]
>>>>>>> [ /ublox_0/context1 ]
>>>>>>> Username =
>>>>>>> AuthenticationMethod = chap
>>>>>>> Protocol = ip
>>>>>>> Name = Internet
>>>>>>> Settings = { }
>>>>>>> IPv6.Settings = { }
>>>>>>> Active = 0
>>>>>>> AccessPointName =
>>>>>>> Password =
>>>>>>> Type = internet
>>>>>>>
>>>>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env
variable set
>>>>>> and run the following scripts:
>>>>>>
>>>>>> enable-modem
>>>>>> online-modem
>>>>>> activate-context
>>>>>>
>>>>>> Then send the logs.
>>>>> Here they are [1]
>>> I am actually a bit lost in the ublox AT Commands manual..
>>>
>>> Do you have a chance to see something at the ofonod+AT logs with your
expertice!?
>>>
>> oFono was able to register on the network an activate the context. This
>> part is interesting for you:
>>
>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_activate_primary() cid
1
>> ofonod[369]: Aux: > AT\r
>> ofonod[369]: Aux: < \r\nOK\r\n
>> ofonod[369]: Aux: Finally woke up the modem
>> ofonod[369]: Aux: > AT+CGDCONT=1,"IP","m2m.tele2.com"\r
>> *> context defined
>>
>> ofonod[369]: Aux: < \r\nOK\r\n
>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgdcont_cb() ok 1
>> ofonod[369]: Aux: > AT+CGACT=1,1\r
>> *> context activated
>>
>> ofonod[369]: Aux: < \r\nOK\r\n
>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgact_enable_cb() ok 1
>> ofonod[369]: Aux: > AT+CGCONTRDP=1\r
>> ofonod[369]: Aux: < \r\n+CREG:
5,"0000","00000010",4\r\n\r\n+CGEV: ME PDN ACT 1\r\n
>> ofonod[369]: src/network.c:ofono_netreg_status_notify() /ublox_0 status 5 tech 4
>> ofonod[369]: src/gprs.c:netreg_status_changed() 5
>> ofonod[369]: src/gprs.c:gprs_netreg_update() attach: 1, driver_attached: 1
>> ofonod[369]: Aux: < \r\n+CGCONTRDP: 1,0,"m2m.tele2.com","
>> ofonod[369]: Aux: <
100.98.55.207.255.255.255.255","100.98.55.207","130.244.127.161","130.244.127.169","0.0.0.0","0.0.0.0",0\r\n
>> ofonod[369]: Aux: < \r\nOK\r\n
>> *> connection properties read successfully
>>
>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgcontrdp_cb() ok 1
>> ofonod[369]: src/modem.c:get_modem_property() modem 0x192a900 property
NetworkInterface
>>
>>> The connman cellular service is set to "a" (association) from
starting
>>> connect cellular_240075810199181_context1
>>> up until timeout.
>>>
>> Do you still run the oFono scripts? From the logs it looks like connman
>> is trying to activate an already active context.
> The technologie and the service is running, but the association does not end
successfully. Do I need to set something else in connman? Where do I have to look?
>
> The try to connect ends up with:
> Error /net/connman/service/cellular_240075810199181_context1: Did not receive a
reply. Possible causes include: the remote application did not send a reply, the message
bus security policy blocked the reply, the reply timeout expired, or the network
connection was broken.
>
Can you send the connman logs as well? I'm not really sure what's
happening here.
sure, here it is!
BR - Yorn
Thanks
1:02 a.m.
New subject: Ublox Toby Modem
Hi Yorn,
Please don't top-post on this mailing list.
On 04/20/2016 09:24 AM, Yorn wrote:
Hi Dragos,
it is still active=0 :(
root@colibri-vf:~/test# ./list-contexts
[ /ublox_0 ]
[ /ublox_0/context1 ]
Username =
AuthenticationMethod = chap
Protocol = ip
Name = Internet
Settings = { }
IPv6.Settings = { }
Active = 0
AccessPointName =
ConnMan won't activate this context without a properly setup APN. So
you need to provision this somehow.
Password =
Type = internet
Regards,
-Denis
2:34 a.m.
New subject: Ublox Toby Modem
Hi Denis,
thanks for your reply!
reply is inlined
Am 20.04.2016 um 17:02 schrieb Denis Kenzior:
Hi Yorn,
Please don't top-post on this mailing list.
On 04/20/2016 09:24 AM, Yorn wrote:
> Hi Dragos,
>
> it is still active=0 :(
>
> root@colibri-vf:~/test# ./list-contexts
> [ /ublox_0 ]
> [ /ublox_0/context1 ]
> Username =
> AuthenticationMethod = chap
> Protocol = ip
> Name = Internet
> Settings = { }
> IPv6.Settings = { }
> Active = 0
> AccessPointName =
ConnMan won't activate this context without a properly setup APN. So
you need to provision this somehow.
I am not sure, what "somehow" means.
I read a discussion about APN, but
it seem to be solved on IRC, so I am not sure of any solution..
> Password =
> Type = internet
>
Regards,
-Denis
_______________________________________________
ofono mailing list
ofono(a)ofono.org
https://lists.ofono.org/mailman/listinfo/ofono
2338
days inactive
2342
days old
13 comments
3 participants
participants (3)
-
Denis Kenzior -
Dragos Tatulea -
Yorn