Hi all, Could any one help me in this? Where could be the issue? I have managed to put together ofono and conn man for an at modem interface. The atmodem is working and here is the detail of a pdp context i created. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [ /generic ] [ /generic/primarycontext1 ] Username = Name = Internet access Settings = { Interface=ppp0 Netmask=255.255.255.255 Method=static DomainNameServers=192.89.123.231,192.89.123.230, Address=109.240.193.169 } Active = 1 AccessPointName = internet Password = Type = internet -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- the ifconfig: ppp0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:10944 (10.9 KB) ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The ifconfig doesn't seem to have all the required information from the ppp link created. why this is so? Is there a way to put these in sync? I have managed to put together conman and ofono. The conman is working perfectly for Ethernet. and is also getting the details of the context i created. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [ /profile/default/cellular_244915470558014_primarycontext1 ] AutoConnect = false Name = FI SONERA Nameservers = [ ] MCC = 244 Proxy = { } Favorite = false Domains.Configuration = [ ] IPv4.Configuration = { } State = idle IPv4 = { } Nameservers.Configuration = [ ] Mode = gprs Domains = [ ] Ethernet = { } Roaming = 0 MNC = 91 Type = cellular Immutable = false SetupRequired = true ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- if the ppp0 interface not provided with an ipaddress? I see no ip address from system tools too. what is missing here from ofono/system configuration? I did code modifications to set the ip address received to the interface ppp0, i can see that the interface shows this ip, but i am unable to use it. I am running a Ubuntu 9.10, running as guest in virtual box, latest connmand and ofono sources compiled. ofono is compiled without isimodem support. Thanks in advance for any help Regards Arun

Hi, Hi Arun, I am using atmodem, and i have the latest of both connman and Ofono. The ppp interface which is made up from Ofono is not usable at all. As you have seen from my mail, there is no IP address or HW address to it. I made the change to put those from pri_update_context_settings() function, but the issue was still there. I can see that when i assign an ip address to the interface, the comm nan logs are also showing it. When i run any clinet (dhclinet, or ftp etc) there is only ppp transmit and not receive at all. But i can see that there is link available as i keep seeing the echo request coming. Something is missing and i am still clueless Regards Arun