On Jun 30, 2018, at 12:08 PM, Kazutomo Yoshii <kazutomo(a)mcs.anl.gov&gt; wrote: Hi, This is a question about Skylake MCP. I'm trying to build 01_hello_world in intel-fpga-bbb (git 7fc7d3d4). First of all, I created ${OPAE_PLATFORM_ROOT}/{bin,hw} using platform-ifc-mgr-compat/SR-6.4.0/install.sh after I extracted skxp_mcp_640_gbs_dev_pkg_ww38.tar.gz into BBS_6.4.0. There was no instruction but I guessed this by reading the install.sh script. Following README.md in 01_hello_world $ afu_synth_setup --source hw/rtl/sources.txt build_synth $ cd build_synthq $ ${OPAE_PLATFORM_ROOT}/bin/run.sh Unfortunately, run.sh failed to generate GBS with the following errors: ls: cannot access skx_pr_afu.sof: No such file or directory Error (213009): File name "skx_pr_afu.persona1.pmsf" does not exist or can't be read fpga_top.sof and fpga_top.persona1.pmsf were generated (see below). I'm wondering whether I can just replace skx_pr_afu with fpga_top. $ ls build/output_files/ fpga_top.persona1.pmsf skx_pr_afu.asm.rpt skx_pr_afu.fit.plan.rpt skx_pr_afu.fit.summary skx_pr_afu.sta.rpt timing_report fpga_top.sof skx_pr_afu.fit.finalize.rpt skx_pr_afu.fit.route.rpt skx_pr_afu.flow.rpt skx_pr_afu.sta.summary fpga_top.static.msf skx_pr_afu.fit.place.rpt skx_pr_afu.fit.rpt skx_pr_afu.pin skx_pr_afu_synth.syn.rpt BTW, can I use OPAE 1.0 for Skylake MCP? or should I use OPAE 0.12, which is included in the beta release in intel.com/sdp Is skxp_mcp_640_gbs_dev_pkg_ww38.tar.gz the latest package? Here is the FME version. $ fpgainfo fme |grep "Bitstream Id" Bitstream Id : 0x6400002fc614bb9 Bitstream Id : 0x6400002fc614bb9 - kaz _______________________________________________ OPAE mailing list OPAE(a)lists.01.org https://lists.01.org/mailman/listinfo/opae

On Jun 30, 2018, at 12:17 PM, Kazutomo Yoshii <kazutomo(a)mcs.anl.gov&gt; wrote: Jiacheng, Thank you for your quick response, Did you mean extra Quartus licenses? BTW, I used Quartus 17.0.0.290 pro. Other Quartus versions simply failed to build (looks like there are some modules depend on this version). - kaz On 06/29/2018 11:10 PM, Jiacheng Ma (马嘉诚) wrote: > Hi, > > We’ve met this before. > It seems like that you need some extra licenses. > > -Jiacheng > >> On Jun 30, 2018, at 12:08 PM, Kazutomo Yoshii <kazutomo(a)mcs.anl.gov&gt; wrote: >> >> Hi, >> >> This is a question about Skylake MCP. >> >> I'm trying to build 01_hello_world in intel-fpga-bbb (git 7fc7d3d4). >> >> First of all, I created ${OPAE_PLATFORM_ROOT}/{bin,hw} using >> platform-ifc-mgr-compat/SR-6.4.0/install.sh after I extracted >> skxp_mcp_640_gbs_dev_pkg_ww38.tar.gz into BBS_6.4.0. There was no >> instruction but I guessed this by reading the install.sh script. >> >> Following README.md in 01_hello_world >> $ afu_synth_setup --source hw/rtl/sources.txt build_synth >> $ cd build_synthq >> $ ${OPAE_PLATFORM_ROOT}/bin/run.sh >> >> Unfortunately, run.sh failed to generate GBS with the following errors: >> >> ls: cannot access skx_pr_afu.sof: No such file or directory >> Error (213009): File name "skx_pr_afu.persona1.pmsf" does not exist or >> can't be read >> >> fpga_top.sof and fpga_top.persona1.pmsf were generated (see below). I'm >> wondering whether I can just replace skx_pr_afu with fpga_top. >> >> $ ls build/output_files/ >> fpga_top.persona1.pmsf skx_pr_afu.asm.rpt >> skx_pr_afu.fit.plan.rpt skx_pr_afu.fit.summary >> skx_pr_afu.sta.rpt timing_report >> fpga_top.sof skx_pr_afu.fit.finalize.rpt >> skx_pr_afu.fit.route.rpt skx_pr_afu.flow.rpt skx_pr_afu.sta.summary >> fpga_top.static.msf skx_pr_afu.fit.place.rpt >> skx_pr_afu.fit.rpt skx_pr_afu.pin skx_pr_afu_synth.syn.rpt >> >> >> BTW, can I use OPAE 1.0 for Skylake MCP? or should I use OPAE 0.12, >> which is included in the beta release in intel.com/sdp >> >> Is skxp_mcp_640_gbs_dev_pkg_ww38.tar.gz the latest package? >> >> Here is the FME version. >> >> $ fpgainfo fme |grep "Bitstream Id" >> Bitstream Id : 0x6400002fc614bb9 >> Bitstream Id : 0x6400002fc614bb9 >> >> - kaz >> >> _______________________________________________ >> OPAE mailing list >> OPAE(a)lists.01.org >> https://lists.01.org/mailman/listinfo/opae

On Jul 3, 2018, at 11:00 AM, Kazutomo Yoshii <kazutomo(a)mcs.anl.gov&gt; wrote: Hi Jiacheng, Thank you for the info, Yes, I use BBS 640 (skxp_mcp_640_gbs_dev_pkg_ww38.tar.gz). Quartus is Version 17.0.0 Build 290 04/26/2017 SJ Pro Edition It does not look like we have those Quartus licenses while we have ip_base, quartus_pro, quartus_partial_reconfig, sw_pe, etc. The build script (run.sh) failed at quartus_cpf with an error msg Error (213009): File name "skx_pr_afu.persona1.pmsf" does not exist or can't be read According to my build log, all previous stages (synthesize, fit, assembler, etc) have completed without error.... I couldn't find license related errors. - kaz > On 06/29/2018 11:25 PM, Jiacheng Ma wrote: > Kazutomo, > > Yes, it’s about Quartus license. You may need the following licenses to build the bitstream: > > Altera Unknown (6AF7 00FB) > Altera Low Latency 10Gbps Ethernet MAC (6AF7 0119) > Altera Low Latency 100Gbps Ethernet MAC and PHY (6AF7 011A) > Altera Low Latency 40Gbps Ethernet MAC and PHY (6AF7 011B) > Altera Signal Tap (6AF7 BCE1) > Altera Signal Tap (6AF7 BCEC) > > Besides, if you are using SR630, you need Quartus 16.0.2.222 + patch 2.06, else if you are using SR640, you need Quartus 17.0. > It seems that patch 2.06 is not available on the internet. You may need to contact Intel to get one. > > -Jiacheng > >> On Jun 30, 2018, at 12:17 PM, Kazutomo Yoshii <kazutomo(a)mcs.anl.gov&gt; wrote: >> >> Jiacheng, >> >> Thank you for your quick response, >> >> Did you mean extra Quartus licenses? >> >> >> BTW, I used Quartus 17.0.0.290 pro. Other Quartus versions simply failed >> to build (looks like there are some modules depend on this version). >> >> - kaz >> >>> On 06/29/2018 11:10 PM, Jiacheng Ma (马嘉诚) wrote: >>> Hi, >>> >>> We’ve met this before. >>> It seems like that you need some extra licenses. >>> >>> -Jiacheng >>> >>>> On Jun 30, 2018, at 12:08 PM, Kazutomo Yoshii <kazutomo(a)mcs.anl.gov&gt; wrote: >>>> >>>> Hi, >>>> >>>> This is a question about Skylake MCP. >>>> >>>> I'm trying to build 01_hello_world in intel-fpga-bbb (git 7fc7d3d4). >>>> >>>> First of all, I created ${OPAE_PLATFORM_ROOT}/{bin,hw} using >>>> platform-ifc-mgr-compat/SR-6.4.0/install.sh after I extracted >>>> skxp_mcp_640_gbs_dev_pkg_ww38.tar.gz into BBS_6.4.0. There was no >>>> instruction but I guessed this by reading the install.sh script. >>>> >>>> Following README.md in 01_hello_world >>>> $ afu_synth_setup --source hw/rtl/sources.txt build_synth >>>> $ cd build_synthq >>>> $ ${OPAE_PLATFORM_ROOT}/bin/run.sh >>>> >>>> Unfortunately, run.sh failed to generate GBS with the following errors: >>>> >>>> ls: cannot access skx_pr_afu.sof: No such file or directory >>>> Error (213009): File name "skx_pr_afu.persona1.pmsf" does not exist or >>>> can't be read >>>> >>>> fpga_top.sof and fpga_top.persona1.pmsf were generated (see below). I'm >>>> wondering whether I can just replace skx_pr_afu with fpga_top. >>>> >>>> $ ls build/output_files/ >>>> fpga_top.persona1.pmsf skx_pr_afu.asm.rpt >>>> skx_pr_afu.fit.plan.rpt skx_pr_afu.fit.summary >>>> skx_pr_afu.sta.rpt timing_report >>>> fpga_top.sof skx_pr_afu.fit.finalize.rpt >>>> skx_pr_afu.fit.route.rpt skx_pr_afu.flow.rpt skx_pr_afu.sta.summary >>>> fpga_top.static.msf skx_pr_afu.fit.place.rpt >>>> skx_pr_afu.fit.rpt skx_pr_afu.pin skx_pr_afu_synth.syn.rpt >>>> >>>> >>>> BTW, can I use OPAE 1.0 for Skylake MCP? or should I use OPAE 0.12, >>>> which is included in the beta release in intel.com/sdp >>>> >>>> Is skxp_mcp_640_gbs_dev_pkg_ww38.tar.gz the latest package? >>>> >>>> Here is the FME version. >>>> >>>> $ fpgainfo fme |grep "Bitstream Id" >>>> Bitstream Id : 0x6400002fc614bb9 >>>> Bitstream Id : 0x6400002fc614bb9 >>>> >>>> - kaz >>>> >>>> _______________________________________________ >>>> OPAE mailing list >>>> OPAE(a)lists.01.org >>>> https://lists.01.org/mailman/listinfo/opae >>