5:34 p.m.
Hello All,
I am trying to add a TianoCore payload to the bootloader but I am running into a problem
here. Perhaps I don't understand correctly. Can you shed some light here
I try to add the payload using the -p command. This is the only one to add a payload.
The issue is that this creates PAYLOAD.lz file which is bigger than the PAYLOAD.pad so
this generates an error.
I noticed there is an EPAYLOAD.pad file of sufficient size and give the name I expect that
the EPAYLOAD is intended for external payloads. So basically I expected the TianoPayload
to end up there (or at least to have a command to tell it it should)
I haven't found a way to do this other than repartitioning the FD providing more space
for the payload but I don't think this is the intention.
If you can explain this t me it would be very helpful.
Best Regards,
Wim Vervoorn
Eltan B.V.
Ambachtstraat 23
5481 SM Schijndel
The Netherlands
T : +31-(0)73-594 46 64
E : wvervoorn(a)eltan.com
W : http://www.eltan.com<http://www.eltan.com/>
[embeddedworld2018]<https://www.embedded-world.de/en/ausstellerprodukte/embwld18/exhibitor-31013502/eltan-b-v>
"THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED
RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE
RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE
+31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL
COPIES."
10:01 a.m.
Including the mailing list.
From: Jin, Huang
Sent: Tuesday, September 18, 2018 4:59 PM
To: 'Wim Vervoorn' <wvervoorn(a)eltan.com>
Subject: RE: Adding TianoCore Payload
Hi Vervoorn,
I'd suggest you use the external payload feature in SBL. How to do this is here:
https://slimbootloader.github.io/how-tos/integrate-multiple-payloads.html....
Thanks,
Aaron
From: Sbl-devel [mailto:sbl-devel-bounces@lists.01.org] On Behalf Of Wim Vervoorn
Sent: Tuesday, September 18, 2018 12:35 AM
To: sbl-devel@lists.01.org<mailto:sbl-devel@lists.01.org>
Subject: [Sbl-devel] Adding TianoCore Payload
Hello All,
I am trying to add a TianoCore payload to the bootloader but I am running into a problem
here. Perhaps I don't understand correctly. Can you shed some light here
I try to add the payload using the -p command. This is the only one to add a payload.
The issue is that this creates PAYLOAD.lz file which is bigger than the PAYLOAD.pad so
this generates an error.
I noticed there is an EPAYLOAD.pad file of sufficient size and give the name I expect that
the EPAYLOAD is intended for external payloads. So basically I expected the TianoPayload
to end up there (or at least to have a command to tell it it should)
I haven't found a way to do this other than repartitioning the FD providing more space
for the payload but I don't think this is the intention.
If you can explain this t me it would be very helpful.
Best Regards,
Wim Vervoorn
Eltan B.V.
Ambachtstraat 23
5481 SM Schijndel
The Netherlands
T : +31-(0)73-594 46 64
E : wvervoorn@eltan.com<mailto:wvervoorn@eltan.com>
W : http://www.eltan.com<http://www.eltan.com/>
[embeddedworld2018]<https://www.embedded-world.de/en/ausstellerprodukte/embwld18/exhibitor-31013502/eltan-b-v>
"THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED
RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE
RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE
+31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL
COPIES."
1460
days inactive
1461
days old
1 comments
2 participants
participants (2)
-
Jin, Huang -
Wim Vervoorn