Re: [SyncEvolution] memo not supported by backends (0.9.1)

-----Original Message----- From: syncevolution-bounces(a)syncevolution.org [mailto:syncevolution-bounces@syncevolution.org] On Behalf Of Zheng, Yanshuang Sent: 2009年11月4日 15:15 To: Ohly, Patrick Cc: syncevolution(a)syncevolution.org Subject: Re: [SyncEvolution] memo not supported by backends (0.9.1) There is configured servers in /usr/etc/default/syncevolution/, while the printed configured servers are stored at $HOME/.config/syncevolution I install sync (http://downloads.syncevolution.org/syncevolution/evolution/syncevolution-... 0.9.1-2.i386.rpm) in a clean fc11, no sync installed before and no configuration before. Then configure service using funambol or scheduleworld template. The configuration is like: $ syncevolution -p --quiet funambol syncURL = http://my.funambol.com/sync username = *********(username here) password = ********(password here) # logdir = # loglevel = 0 # printChanges = 1 # maxlogdirs = 10 # useProxy = 0 # proxyHost = # proxyUsername = # proxyPassword = # clientAuthType = md5 # RetryDuration = 300 # RetryInterval = 60 deviceId = sc-pim-14ec9b89-6246-4348-a70d-73779c8e4b8e enableWBXML = 0 # maxMsgSize = 20000 # maxObjSize = 4000000 # enableCompression = 0 # SSLServerCertificates = /etc/ssl/certs/ca-certificates.crt:/etc/pki/tls/certs/ca-bundle.crt:/usr/share/ssl/certs/ca-b undle.crt # SSLVerifyServer = 1 # SSLVerifyHost = 1 WebURL = http://my.funambol.com # IconURI = ConsumerReady = 1 [addressbook] sync = two-way type = addressbook # evolutionsource = uri = card # evolutionuser = # evolutionpassword = [calendar] sync = two-way type = calendar:text/calendar! # evolutionsource = uri = event # evolutionuser = # evolutionpassword = [memo] sync = disabled type = memo # evolutionsource = uri = note # evolutionuser = # evolutionpassword = [todo] sync = two-way type = todo:text/calendar! # evolutionsource = uri = task # evolutionuser = # evolutionpassword = >-----Original Message----- >From: Ohly, Patrick >Sent: 2009年11月4日 14:48 >To: Zheng, Yanshuang >Cc: Zhu, Yongsheng; Chen, Congwu; syncevolution(a)syncevolution.org >Subject: Re: [SyncEvolution] memo not supported by backends (0.9.1) > >On Wed, 2009-11-04 at 05:47 +0000, Zheng, Yanshuang wrote: >> I tried with scheduleworld, and the same issue occurs. >> Memo not supported by fc11?? > >The "type 'select backend'" error means that in source/memo/config.ini, >the "type" property is not set. This should be independent of whether >the data source is enabled or not, which is controlled by the "sync" >property ("none" if not supported locally) and the "URI" property (empty >if server doesn't support it). > >I just checked, at least on Debian a "XDG_CONFIG_HOME=/tmp syncevolution >--configure funambol" correctly creates >a /tmp/syncevolution/funambol/sources/memo/config.ini with "type=memo" >set, so it is not a general problem of 0.9.1. > >Yanshuang, Jason, do you configure from scratch, with no old Funambol >config lying around which doesn't have the type set? "syncevolution >--print-servers" will tell you were the config is. > >Is there perhaps a SyncEvolution config template for Funambol installed >under /etc/default or /usr/etc/default? > > >-- >Best Regards, Patrick Ohly > >The content of this message is my personal opinion only and although >I am an employee of Intel, the statements I make here in no way >represent Intel's position on the issue, nor am I authorized to speak >on behalf of Intel on this matter. > _______________________________________________ SyncEvolution mailing list SyncEvolution(a)syncevolution.org http://lists.syncevolution.org/listinfo/syncevolution