Re: [SyncEvolution] Syncevolution cant find evolution data
On Fr, 2011-08-05 at 00:45 +0200, Tobias Hägele wrote:
Hello,
Am 2011-08-03 08:34, schrieb Patrick Ohly:
> Hmm. Can you replace "deb http://downloads.syncevolution.org/apt stable
> main" with "deb http://downloads.syncevolution.org/apt unstable
main"?
> Despite the name, the new version 1.1.99.5 is ready to replace 1.1.
Done
Now,the UI is ok and i can klick to my phone. but I can even change any
settings thrugh the UI (but delete and re create the settings).
"But I can even change" - that sounds like you had a problem, but it
isn't clear to me which one.
> Was calendar sync possible before? What is the issue?
Any times ago it works fine with multisync/opensync but suddenly
(dist-upgrade?) it stops working with an undefinied "broken pipe" message.
Now i get the following Message if I start a sync with SyncEvolution
with only the wrote task.
calendar:
######################
[INFO] Server sending SAN
[INFO] calendar: starting first time sync, two-way
Local data changes to be applied during synchronization:
*** calendar ***
Comparison was impossible.
[INFO] calendar: started
[INFO] calendar: received 1
[INFO] calendar: added 0, updated 0, removed 0
[INFO] calendar: received 2
[INFO] calendar: added 0, updated 0, removed 0
[INFO] calendar: received 3
[INFO] calendar: added 0, updated 0, removed 0
[INFO] calendar: received 4
[INFO] calendar: added 0, updated 0, removed 0
[ERROR] Background sync daemon has gone.
Okay, so it still crashes. Can you help me debug that?
First install evolution-data-server-dbg, libglib2.0-0-dbg, gdb and
valgrind.
Before you start the UI, do the following in a shell window:
killall syncevo-dbus-server
gdb /usr/libexec/syncevo-dbus-server
# run
Then run the sync. You should see gdb telling you about a crash. Once
that happens, in gdb do:
# thread apply all bt
What's the output?
Next repeat the exercise with syncevo-dbus-server started under
valgrind:
valgrind /usr/libexec/syncevo-dbus-server 2>&1 | tee /tmp/valgrind.log
Does valgrind report any errors?
task:
######################
[INFO] memo: inactive
[INFO] todo: inactive
[ERROR] error code from SyncEvolution fatal error (local, status 10500):
tasks: backend 'select backend' not supported by any of the backend
modules (synckcalextended.so, syncxmlrpc.so, syncmaemocal.so,
syncqtcontacts.so, syncaddressbook.so, syncecal.so, syncsqlite.so,
syncfile.so, syncdav.so, syncakonadi.so, syncebook.so) or not fully
configured (format '')
Why is your source called "tasks"? SyncEvolution itself uses "todo"
as
name.
--
Best Regards, Patrick Ohly
The content of this message is my personal opinion only and although
I am an employee of Intel, the statements I make here in no way
represent Intel's position on the issue, nor am I authorized to speak
on behalf of Intel on this matter.