2:54 a.m.
I'm a complete newbie to this software -- I just discovered it yesterday
and just set up a MemoToo account to sync to -- so apologies if this is a
dumb question.
When I sync everything seems to work great but on MemoToo my Tasks list
only contains *one* of the groups of Tasks I have in Evolution (my
"Personal" list but none of my task lists for work related projects). All
of my Tasks in Evolution are "On This Computer" and I can't find anything
in MemoToo that suggests it has the rest of the Tasks but just isn't
showing them. FYI I'm using syncevolution version 1.1.1-2 and Evolution
2.28.3 on Ubuntu 10.04 LTS and all I've done so far to configure was fill
in the username and password in the "Sync" GUI.
Other than this one small problem, thanks for a great piece of software!
-- Mike
11:36 p.m.
On Fr, 2011-01-14 at 15:54 +0000, mdietze(a)life.illinois.edu wrote:
I'm a complete newbie to this software -- I just discovered it
yesterday
and just set up a MemoToo account to sync to -- so apologies if this is a
dumb question.
When I sync everything seems to work great but on MemoToo my Tasks list
only contains *one* of the groups of Tasks I have in Evolution (my
"Personal" list but none of my task lists for work related projects). All
of my Tasks in Evolution are "On This Computer" and I can't find anything
in MemoToo that suggests it has the rest of the Tasks but just isn't
showing them.
SyncEvolution indeed only synchronizes one of your local task lists. It
picks a "default" one based on the order in which the task lists are
reported by Evolution. You can run the "syncevolution" command without
parameters to see what is available locally.
Does MemoToo have multiple tasks lists? Thomas, are they exposed via
different URIs or URI parameters?
SyncEvolution could be configured to synchronize multiple tasks lists if
the server supports it.
--
Best Regards, Patrick Ohly
The content of this message is my personal opinion only and although
I am an employee of Intel, the statements I make here in no way
represent Intel's position on the issue, nor am I authorized to speak
on behalf of Intel on this matter.
5:29 a.m.
On Sat, 2011-01-15 at 13:36 +0100, Patrick Ohly wrote:
On Fr, 2011-01-14 at 15:54 +0000, mdietze(a)life.illinois.edu wrote:
> I'm a complete newbie to this software -- I just discovered it yesterday
> and just set up a MemoToo account to sync to -- so apologies if this is a
> dumb question.
>
> When I sync everything seems to work great but on MemoToo my Tasks list
> only contains *one* of the groups of Tasks I have in Evolution (my
> "Personal" list but none of my task lists for work related projects).
All
> of my Tasks in Evolution are "On This Computer" and I can't find
anything
> in MemoToo that suggests it has the rest of the Tasks but just isn't
> showing them.
SyncEvolution indeed only synchronizes one of your local task lists. It
picks a "default" one based on the order in which the task lists are
reported by Evolution. You can run the "syncevolution" command without
parameters to see what is available locally.
Does MemoToo have multiple tasks lists? Thomas, are they exposed via
different URIs or URI parameters?
SyncEvolution could be configured to synchronize multiple tasks lists if
the server supports it.
Ok, from the command line I was able to figure out how to change the
task list, which helped a lot. However I'm confused on the syntax for
specifying multiple lists. Based on the config file it looks like
something like the following should work where the lists are
comma-separated
syncevolution --configure --source-property
evolutionsource=Work,Personal memotoo todo
But then this gives the error
[ERROR] todo: not found: 'Work,Personal'
and neither is synced which suggests the code is interpreting this as
one list named 'Work,Personal' rather than two
Thanks for the help. Even if I can only switch lists this is a step in
the right direction.
-- Mike
--
12:13 a.m.
On Sa, 2011-01-15 at 18:29 +0000, Michael Dietze wrote:
Ok, from the command line I was able to figure out how to change the
task list, which helped a lot. However I'm confused on the syntax for
specifying multiple lists. Based on the config file it looks like
something like the following should work where the lists are
comma-separated
syncevolution --configure --source-property
evolutionsource=Work,Personal memotoo todo
But then this gives the error
[ERROR] todo: not found: 'Work,Personal'
and neither is synced which suggests the code is interpreting this as
one list named 'Work,Personal' rather than two
That's indeed what "evolutionsource" specifies. There is no way at the
moment how two local databases can be synchronized against a single URI
on the server side. There's an open issue about it [1], but we are far
from having any code for it.
Therefore my question to Thomas about exposing the different server-side
databases via different URIs. If that is possible, then it'll be
possible to configure "todo" and "todo-work" (or whatever you want to
call it) and synchronize both.
[1] http://bugs.meego.com/show_bug.cgi?id=685
--
Best Regards, Patrick Ohly
The content of this message is my personal opinion only and although
I am an employee of Intel, the statements I make here in no way
represent Intel's position on the issue, nor am I authorized to speak
on behalf of Intel on this matter.
11:24 p.m.
Yes you can configure different URI to synchronize some categories of
Memotoo.
For example, set "uri = task.1234" where "1234" is the ID of the
category.
You can found the uriwith the IDs categories in this page:
https://www.memotoo.com/index.php?rub=infoSyncML
Thomas
Le 16/01/2011 14:13, Patrick Ohly a écrit :
On Sa, 2011-01-15 at 18:29 +0000, Michael Dietze wrote:
> Ok, from the command line I was able to figure out how to change the
> task list, which helped a lot. However I'm confused on the syntax for
> specifying multiple lists. Based on the config file it looks like
> something like the following should work where the lists are
> comma-separated
>
> syncevolution --configure --source-property
> evolutionsource=Work,Personal memotoo todo
>
> But then this gives the error
>
> [ERROR] todo: not found: 'Work,Personal'
>
> and neither is synced which suggests the code is interpreting this as
> one list named 'Work,Personal' rather than two
That's indeed what "evolutionsource" specifies. There is no way at the
moment how two local databases can be synchronized against a single URI
on the server side. There's an open issue about it [1], but we are far
from having any code for it.
Therefore my question to Thomas about exposing the different server-side
databases via different URIs. If that is possible, then it'll be
possible to configure "todo" and "todo-work" (or whatever you want
to
call it) and synchronize both.
[1] http://bugs.meego.com/show_bug.cgi?id=685
1:59 a.m.
On Mi, 2011-01-19 at 12:24 +0000, Thomas Pequet wrote:
Yes you can configure different URI to synchronize some categories
of
Memotoo.
For example, set "uri = task.1234" where "1234" is the ID of the
category.
You can found the uri with the IDs categories in this page:
https://www.memotoo.com/index.php?rub=infoSyncML
But if "uri = task" is used, all tasks on MemoToo are synchronized,
right?
I think Michael organizes his tasks differently: instead of having them
all in the same task list with different categories, he keeps different
task lists in Evolution, one for work, one for personal tasks.
Michael, if you don't use CATEGORIES already inside your task lists,
then you can use this MemoToo feature as follows:
syncevolution --configure \
--source-property evolutionsource=Personal \
--source-property uri=task.<MemoToo Personal Category Number> \
memotoo todo
syncevolution --configure \
--source-property evolutionsource=Work \
--source-property uri=task.<MemoToo Work Category Number> \
--source-property sync=two-way \
memotoo todo_work
syncevolution memotoo
This assumes that MemoToo currently is in sync with your "Personal" task
list. Otherwise beware of potential duplicates.
--
Best Regards, Patrick Ohly
The content of this message is my personal opinion only and although
I am an employee of Intel, the statements I make here in no way
represent Intel's position on the issue, nor am I authorized to speak
on behalf of Intel on this matter.
2:36 a.m.
Yes with "uri = task", all tasks are synced.
Thomas
Le 19/01/2011 15:59, Patrick Ohly a écrit :
On Mi, 2011-01-19 at 12:24 +0000, Thomas Pequet wrote:
> Yes you can configure different URI to synchronize some categories of
> Memotoo.
> For example, set "uri = task.1234" where "1234" is the ID of the
> category.
> You can found the uri with the IDs categories in this page:
> https://www.memotoo.com/index.php?rub=infoSyncML
But if "uri = task" is used, all tasks on MemoToo are synchronized,
right?
I think Michael organizes his tasks differently: instead of having them
all in the same task list with different categories, he keeps different
task lists in Evolution, one for work, one for personal tasks.
Michael, if you don't use CATEGORIES already inside your task lists,
then you can use this MemoToo feature as follows:
syncevolution --configure \
--source-property evolutionsource=Personal \
--source-property uri=task.<MemoToo Personal Category Number> \
memotoo todo
syncevolution --configure \
--source-property evolutionsource=Work \
--source-property uri=task.<MemoToo Work Category Number> \
--source-property sync=two-way \
memotoo todo_work
syncevolution memotoo
This assumes that MemoToo currently is in sync with your "Personal" task
list. Otherwise beware of potential duplicates.
4260
days inactive
4265
days old
syncevolution@synevolution.org
6 comments
4 participants
participants (4)
-
mdietze＠life.illinois.edu -
Michael Dietze
-
Patrick Ohly -
Thomas Pequet