[edk2] [PATCH v3 edk2-platforms] Platform/ARM/SgiPkg: Add support for HDLCD

Ard Biesheuvel ard.biesheuvel at linaro.org
Fri Dec 7 12:34:30 PST 2018


On Fri, 7 Dec 2018 at 09:28, Vijayenthiran Subramaniam
<vijayenthiran.subramaniam at arm.com> wrote:
>
> Add HDLCD platform library for SGI platform that implements platform
> callbacks for the Arm HDLCD driver.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam at arm.com>
> ---
> Change from v2:
> No code change. Posting patch again with Change-Id removed.
>

Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>

Pushed as 327ff4ae71ae..0eaa50231c02

Thanks!

>  Platform/ARM/SgiPkg/SgiPlatform.dsc                           |   6 +
>  Platform/ARM/SgiPkg/SgiPlatform.fdf                           |   6 +
>  Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgiLib.inf |  40 +++
>  Platform/ARM/SgiPkg/Include/SgiPlatform.h                     |   4 +
>  Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgi.c      | 257 ++++++++++++++++++++
>  Platform/ARM/SgiPkg/Library/PlatformLib/PlatformLibMem.c      |   8 +-
>  6 files changed, 320 insertions(+), 1 deletion(-)
>
> diff --git a/Platform/ARM/SgiPkg/SgiPlatform.dsc b/Platform/ARM/SgiPkg/SgiPlatform.dsc
> index 0c794c6b299d..7995c7d132d6 100644
> --- a/Platform/ARM/SgiPkg/SgiPlatform.dsc
> +++ b/Platform/ARM/SgiPkg/SgiPlatform.dsc
> @@ -37,6 +37,8 @@ [LibraryClasses.common]
>    ArmPlatformLib|Platform/ARM/SgiPkg/Library/PlatformLib/PlatformLib.inf
>    BasePathLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
>    EfiResetSystemLib|ArmPkg/Library/ArmPsciResetSystemLib/ArmPsciResetSystemLib.inf
> +  LcdHwLib|ArmPlatformPkg/Library/HdLcd/HdLcd.inf
> +  LcdPlatformLib|Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgiLib.inf
>    NorFlashPlatformLib|Platform/ARM/SgiPkg/Library/NorFlashLib/NorFlashLib.inf
>    HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
>    TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
> @@ -155,6 +157,9 @@ [PcdsFixedAtBuild.common]
>    gArmPlatformTokenSpaceGuid.PL011UartInteger|4
>    gArmPlatformTokenSpaceGuid.PL011UartFractional|0
>
> +  ## PL370 - HDLCD1
> +  gArmPlatformTokenSpaceGuid.PcdArmHdLcdBase|0x7FF60000
> +
>    ## PL011 - Serial Debug UART
>    gArmPlatformTokenSpaceGuid.PcdSerialDbgRegisterBase|0x7FF80000
>    gArmPlatformTokenSpaceGuid.PcdSerialDbgUartClkInHz|7372800
> @@ -235,6 +240,7 @@ [Components.common]
>    ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
>    ArmPkg/Drivers/TimerDxe/TimerDxe.inf
>    ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
> +  ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
>    ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
>    EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
>    EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
> diff --git a/Platform/ARM/SgiPkg/SgiPlatform.fdf b/Platform/ARM/SgiPkg/SgiPlatform.fdf
> index ddf1fda5a16e..80c3412fd4ad 100644
> --- a/Platform/ARM/SgiPkg/SgiPlatform.fdf
> +++ b/Platform/ARM/SgiPkg/SgiPlatform.fdf
> @@ -133,6 +133,9 @@ [FV.FvMain]
>    #
>    # Multiple Console IO support
>    #
> +  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
> +  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
> +  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
>    INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
>    INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
>
> @@ -144,6 +147,9 @@ [FV.FvMain]
>    INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
>    INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
>
> +  # Graphics Output Protocol
> +  INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
> +
>    INF Platform/ARM/Drivers/BootMonFs/BootMonFs.inf
>    INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
>
> diff --git a/Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgiLib.inf b/Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgiLib.inf
> new file mode 100644
> index 000000000000..751f0d9288eb
> --- /dev/null
> +++ b/Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgiLib.inf
> @@ -0,0 +1,40 @@
> +#
> +#  Copyright (c) 2018, ARM Limited. All rights reserved.
> +#
> +#  This program and the accompanying materials are licensed and made available
> +#  under the terms and conditions of the BSD License which accompanies this
> +#  distribution.  The full text of the license may be found at
> +#  http://opensource.org/licenses/bsd-license.php
> +#
> +#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +
> +[Defines]
> +  INF_VERSION                    = 0x0001001A
> +  BASE_NAME                      = HdLcdArmSgiLib
> +  FILE_GUID                      = 0C77342C-7895-4DE1-A9C8-1DBBFA71AF34
> +  MODULE_TYPE                    = BASE
> +  VERSION_STRING                 = 1.0
> +  LIBRARY_CLASS                  = LcdPlatformLib
> +
> +[Sources.common]
> +  HdLcdArmSgi.c
> +
> +[Packages]
> +  ArmPkg/ArmPkg.dec
> +  ArmPlatformPkg/ArmPlatformPkg.dec
> +  MdePkg/MdePkg.dec
> +  Platform/ARM/SgiPkg/SgiPlatform.dec
> +
> +[LibraryClasses]
> +  BaseLib
> +
> +[FixedPcd]
> +  gArmPlatformTokenSpaceGuid.PcdArmHdLcdBase
> +  gArmPlatformTokenSpaceGuid.PcdArmLcdDdrFrameBufferBase
> +  gArmPlatformTokenSpaceGuid.PcdArmLcdDdrFrameBufferSize
> +  gArmPlatformTokenSpaceGuid.PcdGopPixelFormat
> +
> +[depex]
> +  gEfiCpuArchProtocolGuid
> diff --git a/Platform/ARM/SgiPkg/Include/SgiPlatform.h b/Platform/ARM/SgiPkg/Include/SgiPlatform.h
> index 550189565752..b9a662ae41a1 100644
> --- a/Platform/ARM/SgiPkg/Include/SgiPlatform.h
> +++ b/Platform/ARM/SgiPkg/Include/SgiPlatform.h
> @@ -56,6 +56,10 @@
>  #define SGI_SUBSYS_GENERIC_GICR_BASE              0x300C0000
>  #define SGI_SUBSYS_GENERIC_GIC_SZ                 SIZE_1MB
>
> +// Expansion AXI - Platform Peripherals - HDLCD1
> +#define SGI_EXP_PLAT_PERIPH_HDLCD1_BASE           0x7FF60000
> +#define SGI_EXP_PLAT_PERIPH_HDLCD1_SZ             SIZE_64KB
> +
>  // Expansion AXI - Platform Peripherals - UART0
>  #define SGI_EXP_PLAT_PERIPH_UART0_BASE            0x7FF70000
>  #define SGI_EXP_PLAT_PERIPH_UART0_SZ              SIZE_64KB
> diff --git a/Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgi.c b/Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgi.c
> new file mode 100644
> index 000000000000..55f10f4eb75d
> --- /dev/null
> +++ b/Platform/ARM/SgiPkg/Library/HdLcdArmSgiLib/HdLcdArmSgi.c
> @@ -0,0 +1,257 @@
> +/** @file
> +*
> +*  Copyright (c) 2018, ARM Limited. All rights reserved.
> +*
> +*  This program and the accompanying materials are licensed and made available
> +*  under the terms and conditions of the BSD License which accompanies this
> +*  distribution.  The full text of the license may be found at
> +*  http://opensource.org/licenses/bsd-license.php
> +*
> +*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +*
> +**/
> +
> +#include <PiDxe.h>
> +#include <Library/DebugLib.h>
> +#include <Library/LcdPlatformLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Protocol/Cpu.h>
> +
> +typedef struct {
> +  UINT32                      OscFreq;
> +  SCAN_TIMINGS                Horizontal;
> +  SCAN_TIMINGS                Vertical;
> +} DISPLAY_MODE;
> +
> +STATIC DISPLAY_MODE mDisplayModes[] = {
> +  {
> +    // SVGA : 800 x 600 x 24 bpp.
> +    SVGA_OSC_FREQUENCY,
> +    {SVGA_H_RES_PIXELS, SVGA_H_SYNC, SVGA_H_BACK_PORCH, SVGA_H_FRONT_PORCH},
> +    {SVGA_V_RES_PIXELS, SVGA_V_SYNC, SVGA_V_BACK_PORCH, SVGA_V_FRONT_PORCH}
> +  }
> +};
> +
> +STATIC CONST UINT32 mMaxMode = ARRAY_SIZE (mDisplayModes);
> +
> +/** HDLCD platform specific initialization function.
> +
> +  @param[in] Handle              Handle to the LCD device instance.
> +
> +  @retval EFI_SUCCESS            Plaform library initialized successfully.
> +  @retval EFI_UNSUPPORTED        PcdGopPixelFormat must be
> +                                 PixelRedGreenBlueReserved8BitPerColor OR
> +                                 PixelBlueGreenRedReserved8BitPerColor
> +                                 any other format is not supported.
> +  @retval other                  Other errors.
> +**/
> +EFI_STATUS
> +LcdPlatformInitializeDisplay (
> +  IN  EFI_HANDLE  Handle
> +  )
> +{
> +  EFI_GRAPHICS_PIXEL_FORMAT PixelFormat;
> +
> +  // PixelBitMask and PixelBltOnly pixel formats are not supported.
> +  PixelFormat = FixedPcdGet32 (PcdGopPixelFormat);
> +  if (PixelFormat != PixelRedGreenBlueReserved8BitPerColor &&
> +      PixelFormat != PixelBlueGreenRedReserved8BitPerColor) {
> +
> +    ASSERT (PixelFormat == PixelRedGreenBlueReserved8BitPerColor ||
> +      PixelFormat == PixelBlueGreenRedReserved8BitPerColor);
> +    return EFI_UNSUPPORTED;
> +  }
> +
> +  return EFI_SUCCESS;
> +}
> +
> +/** Allocate VRAM memory in DRAM for the framebuffer
> +
> +  The allocated address can be used to set the framebuffer.
> +
> +  @param[out] VramBaseAddress     A pointer to the framebuffer address.
> +  @param[out] VramSize            A pointer to the size of the framebuffer
> +                                  in bytes
> +
> +  @retval EFI_SUCCESS             Framebuffer memory allocated successfully.
> +  @retval other                   Other errors.
> +**/
> +EFI_STATUS
> +LcdPlatformGetVram (
> +  OUT EFI_PHYSICAL_ADDRESS  *VramBaseAddress,
> +  OUT UINTN                 *VramSize
> +  )
> +{
> +  EFI_STATUS             Status;
> +  EFI_CPU_ARCH_PROTOCOL  *Cpu;
> +
> +  ASSERT (VramBaseAddress != NULL);
> +  ASSERT (VramSize != NULL);
> +
> +  // Set the VRAM size.
> +  *VramSize = (UINTN)FixedPcdGet32 (PcdArmLcdDdrFrameBufferSize);
> +
> +  // Check if base address is already reserved for the framebuffer.
> +  *VramBaseAddress =
> +     (EFI_PHYSICAL_ADDRESS)FixedPcdGet64 (PcdArmLcdDdrFrameBufferBase);
> +
> +  if (*VramBaseAddress == 0) {
> +    // If not already reserved, attempt to allocate the VRAM from the DRAM.
> +    Status = gBS->AllocatePages (
> +                    AllocateAnyPages,
> +                    EfiReservedMemoryType,
> +                    EFI_SIZE_TO_PAGES (*VramSize),
> +                    VramBaseAddress);
> +    if (EFI_ERROR (Status)) {
> +      DEBUG ((DEBUG_ERROR, "HdLcdArmSgi: Failed to allocate memory for"
> +        "frame buffer.\n"));
> +      ASSERT_EFI_ERROR (Status);
> +      return Status;
> +    }
> +  }
> +
> +  // Ensure the Cpu architectural protocol is already installed
> +  Status = gBS->LocateProtocol (
> +                  &gEfiCpuArchProtocolGuid,
> +                  NULL,
> +                  (VOID **)&Cpu);
> +  ASSERT_EFI_ERROR (Status);
> +
> +  // The VRAM is inside the DRAM, which is cacheable.
> +  // Mark the VRAM as write-combining (uncached) and non-executable.
> +  Status = Cpu->SetMemoryAttributes (
> +                  Cpu,
> +                  *VramBaseAddress,
> +                  *VramSize,
> +                  EFI_MEMORY_WC | EFI_MEMORY_XP);
> +  if (EFI_ERROR (Status)) {
> +    ASSERT_EFI_ERROR (Status);
> +    gBS->FreePages (*VramBaseAddress, EFI_SIZE_TO_PAGES (*VramSize));
> +  }
> +
> +  return Status;
> +}
> +
> +/** Return total number of modes supported.
> +
> +  @retval UINT32             Mode Number.
> +**/
> +UINT32
> +LcdPlatformGetMaxMode (VOID)
> +{
> +  return  mMaxMode;
> +}
> +
> +/** Set the requested display mode.
> +
> +  @param[in] ModeNumber            Mode Number.
> +
> +  @retval EFI_SUCCESS              Mode set successfully.
> +  @retval EFI_INVALID_PARAMETER    Requested mode not found.
> +**/
> +EFI_STATUS
> +LcdPlatformSetMode (
> +  IN  UINT32  ModeNumber
> +  )
> +{
> +  if (ModeNumber >= mMaxMode) {
> +    return EFI_INVALID_PARAMETER;
> +  }
> +
> +  return EFI_SUCCESS;
> +}
> +
> +/** Return information for the requested mode number.
> +
> +  @param[in]  ModeNumber          Mode Number.
> +
> +  @param[out] Info                Pointer for returned mode information
> +                                  (on success).
> +
> +  @retval EFI_SUCCESS             Mode information for the requested mode
> +                                  returned successfully.
> +  @retval EFI_INVALID_PARAMETER   Requested mode not found.
> +**/
> +EFI_STATUS
> +LcdPlatformQueryMode (
> +  IN  UINT32                                ModeNumber,
> +  OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION  *Info
> +  )
> +{
> +  if (ModeNumber >= mMaxMode) {
> +    return EFI_INVALID_PARAMETER;
> +  }
> +
> +  ASSERT (Info != NULL);
> +
> +  Info->Version = 0;
> +  Info->HorizontalResolution = mDisplayModes[ModeNumber].Horizontal.Resolution;
> +  Info->VerticalResolution = mDisplayModes[ModeNumber].Vertical.Resolution;
> +  Info->PixelsPerScanLine = mDisplayModes[ModeNumber].Horizontal.Resolution;
> +  Info->PixelFormat = FixedPcdGet32 (PcdGopPixelFormat);
> +
> +  return EFI_SUCCESS;
> +}
> +
> +/** Return display timing information for the requested mode number.
> +
> +  @param[in]  ModeNumber          Mode Number.
> +
> +  @param[out] Horizontal          Pointer to horizontal timing parameters.
> +                                  (Resolution, Sync, Back porch, Front porch)
> +  @param[out] Vertical            Pointer to vertical timing parameters.
> +                                  (Resolution, Sync, Back porch, Front porch)
> +
> +  @retval EFI_SUCCESS             Display timing information for the requested
> +                                  mode returned successfully.
> +  @retval EFI_INVALID_PARAMETER   Requested mode not found.
> +**/
> +EFI_STATUS
> +LcdPlatformGetTimings (
> +  IN  UINT32        ModeNumber,
> +  OUT SCAN_TIMINGS  **Horizontal,
> +  OUT SCAN_TIMINGS  **Vertical
> +  )
> +{
> +  if (ModeNumber >= mMaxMode) {
> +    return EFI_INVALID_PARAMETER;
> +  }
> +
> +  ASSERT (Horizontal != NULL);
> +  ASSERT (Vertical != NULL);
> +
> +  *Horizontal = &mDisplayModes[ModeNumber].Horizontal;
> +  *Vertical   = &mDisplayModes[ModeNumber].Vertical;
> +
> +  // Pretend that clock probing and get timings are successful for SGI FVP
> +  return EFI_SUCCESS;
> +}
> +
> +/** Return bits per pixel information for a mode number.
> +
> +  @param[in]  ModeNumber          Mode Number.
> +
> +  @param[out] Bpp                 Pointer to bits per pixel information.
> +
> +  @retval EFI_SUCCESS             Bits per pixel information for the requested
> +                                  mode returned successfully.
> +  @retval EFI_INVALID_PARAMETER   Requested mode not found.
> +**/
> +EFI_STATUS
> +LcdPlatformGetBpp (
> +  IN  UINT32   ModeNumber,
> +  OUT LCD_BPP  *Bpp
> +  )
> +{
> +  if (ModeNumber >= mMaxMode) {
> +    return EFI_INVALID_PARAMETER;
> +  }
> +
> +  ASSERT (Bpp != NULL);
> +
> +  *Bpp = LCD_BITS_PER_PIXEL_24;
> +
> +  return EFI_SUCCESS;
> +}
> diff --git a/Platform/ARM/SgiPkg/Library/PlatformLib/PlatformLibMem.c b/Platform/ARM/SgiPkg/Library/PlatformLib/PlatformLibMem.c
> index 3314a26e8f41..6ec2e8a7096d 100644
> --- a/Platform/ARM/SgiPkg/Library/PlatformLib/PlatformLibMem.c
> +++ b/Platform/ARM/SgiPkg/Library/PlatformLib/PlatformLibMem.c
> @@ -22,7 +22,7 @@
>  #include <SgiPlatform.h>
>
>  // Total number of descriptors, including the final "end-of-table" descriptor.
> -#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS  11
> +#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS  12
>
>  /**
>    Returns the Virtual Memory Map of the platform.
> @@ -104,6 +104,12 @@ ArmPlatformGetVirtualMemoryMap (
>    VirtualMemoryTable[Index].Length          = SGI_SUBSYS_GENERIC_GIC_SZ;
>    VirtualMemoryTable[Index].Attributes      = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
>
> +  // Expansion AXI - Platform Peripherals - HDLCD1
> +  VirtualMemoryTable[++Index].PhysicalBase  = SGI_EXP_PLAT_PERIPH_HDLCD1_BASE;
> +  VirtualMemoryTable[Index].VirtualBase     = SGI_EXP_PLAT_PERIPH_HDLCD1_BASE;
> +  VirtualMemoryTable[Index].Length          = SGI_EXP_PLAT_PERIPH_HDLCD1_SZ;
> +  VirtualMemoryTable[Index].Attributes      = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
> +
>    // Expansion AXI - Platform Peripherals - UART1
>    VirtualMemoryTable[++Index].PhysicalBase  = SGI_EXP_PLAT_PERIPH_UART1_BASE;
>    VirtualMemoryTable[Index].VirtualBase     = SGI_EXP_PLAT_PERIPH_UART1_BASE;
> --
> 2.7.4
>


More information about the edk2-devel mailing list