[edk2] [PATCH v1 edk2-platforms 1/8] Platform/ARM/SgiPkg: Restructure virtio device registration

Vijayenthiran Subramaniam vijayenthiran.subramaniam at arm.com
Tue Dec 11 01:07:57 PST 2018


On Fri, Dec 7, 2018 at 5:49 AM Vijayenthiran Subramaniam
<vijayenthiran.subramaniam at arm.com> wrote:
>
> On Thu, Dec 6, 2018 at 5:18 PM Ard Biesheuvel <ard.biesheuvel at linaro.org> wrote:
> >
> > On Wed, 5 Dec 2018 at 07:10, Vijayenthiran Subramaniam
> > <vijayenthiran.subramaniam at arm.com> wrote:
> > >
> > > Hi Ard,
> > >
> > > The virtio block device and virtio network device are available in software model only. As of now, it exposes only one instance of each device.
> > >
> >
> > Are the virtio devices described by the device tree obtained from the
> > secure firmware?
>
> No. The device tree from secure firmware does not carry any devices
> information other than platform/config id.
>

Please let me know if there are any further comments on this patch
series. Otherwise, requesting to review the series and merge.

> >
> > > On Tue, Dec 4, 2018 at 8:16 PM Ard Biesheuvel <ard.biesheuvel at linaro.org> wrote:
> > >>
> > >> On Tue, 4 Dec 2018 at 10:12, Vijayenthiran Subramaniam
> > >> <vijayenthiran.subramaniam at arm.com> wrote:
> > >> >
> > >> > From: Daniil Egranov <daniil.egranov at arm.com>
> > >> >
> > >> > SGI platforms support multiple virtio devices. So the existing code, that
> > >> > supports registration of only the virtio disk, is restructured to
> > >> > accommodate the registration of additional virtio devices.
> > >> >
> > >> > In addition to this, PCDs to represent the virtio controller base and
> > >> > address space size are introduced.
> > >> >
> > >> > Contributed-under: TianoCore Contribution Agreement 1.1
> > >> > Signed-off-by: Daniil Egranov <daniil.egranov at arm.com>
> > >> > ---
> > >> >  Platform/ARM/SgiPkg/SgiPlatform.dec                                          |  8 ++-
> > >> >  Platform/ARM/SgiPkg/SgiPlatform.dsc                                          |  7 +-
> > >> >  Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf                      |  8 ++-
> > >> >  Platform/ARM/SgiPkg/Include/Guid/SgiVirtioDevicesFormSet.h                   | 21 ++++++
> > >> >  Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c                        | 14 +---
> > >> >  Platform/ARM/SgiPkg/Drivers/PlatformDxe/{VirtioBlockIo.c => VirtioDevices.c} | 67 ++++++++++++--------
> > >> >  6 files changed, 81 insertions(+), 44 deletions(-)
> > >> >
> > >>
> > >> Can these platforms only ever expose a single block device and a
> > >> single network device?
> > >>
> > >> > diff --git a/Platform/ARM/SgiPkg/SgiPlatform.dec b/Platform/ARM/SgiPkg/SgiPlatform.dec
> > >> > index f6e0ba1e927a..ed29a4d5d91f 100644
> > >> > --- a/Platform/ARM/SgiPkg/SgiPlatform.dec
> > >> > +++ b/Platform/ARM/SgiPkg/SgiPlatform.dec
> > >> > @@ -37,12 +37,16 @@ [Guids.common]
> > >> >    gSgiClarkHeliosAcpiTablesFileGuid = { 0x2af40815, 0xa84e, 0x4de9, { 0x8c, 0x38, 0x91, 0x40, 0xb3, 0x54, 0x40, 0x73 } }
> > >> >
> > >> >  [PcdsFeatureFlag.common]
> > >> > -  # Set this PCD to TRUE to enable virtio support.
> > >> > -  gArmSgiTokenSpaceGuid.PcdVirtioSupported|TRUE|BOOLEAN|0x00000001
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkSupported|FALSE|BOOLEAN|0x00000001
> > >> >
> > >> >  [PcdsFixedAtBuild]
> > >> >    gArmSgiTokenSpaceGuid.PcdDramBlock2Base|0|UINT64|0x00000002
> > >> >    gArmSgiTokenSpaceGuid.PcdDramBlock2Size|0|UINT64|0x00000003
> > >> >
> > >> > +  # Virtio Block device
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkBaseAddress|0x00000000|UINT32|0x00000004
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkSize|0x00000000|UINT32|0x00000005
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkInterrupt|0x00000000|UINT32|0x00000006
> > >> > +
> > >> >  [Ppis]
> > >> >    gHwConfigDtInfoPpiGuid     = { 0x6f606eb3, 0x9123, 0x4e15, { 0xa8, 0x9b, 0x0f, 0xac, 0x66, 0xef, 0xd0, 0x17 } }
> > >> > diff --git a/Platform/ARM/SgiPkg/SgiPlatform.dsc b/Platform/ARM/SgiPkg/SgiPlatform.dsc
> > >> > index b3f76d2d9720..ada72be72f8a 100644
> > >> > --- a/Platform/ARM/SgiPkg/SgiPlatform.dsc
> > >> > +++ b/Platform/ARM/SgiPkg/SgiPlatform.dsc
> > >> > @@ -98,7 +98,7 @@ [LibraryClasses.common.UEFI_DRIVER, LibraryClasses.common.UEFI_APPLICATION, Libr
> > >> >  ################################################################################
> > >> >
> > >> >  [PcdsFeatureFlag.common]
> > >> > -  gArmSgiTokenSpaceGuid.PcdVirtioSupported|TRUE
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkSupported|TRUE
> > >> >
> > >> >  [PcdsFixedAtBuild.common]
> > >> >    gArmTokenSpaceGuid.PcdVFPEnabled|1
> > >> > @@ -180,6 +180,11 @@ [PcdsFixedAtBuild.common]
> > >> >    # Ethernet
> > >> >    gEmbeddedTokenSpaceGuid.PcdLan91xDxeBaseAddress|0x18000000
> > >> >
> > >> > +  # Virtio Disk
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkBaseAddress|0x1c130000
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkSize|0x10000
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkInterrupt|202
> > >> > +
> > >> >  ################################################################################
> > >> >  #
> > >> >  # Components Section - list of all EDK II Modules needed by this Platform
> > >> > diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
> > >> > index d903ed8d3375..f920f6ecafb8 100644
> > >> > --- a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
> > >> > +++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
> > >> > @@ -20,7 +20,7 @@ [Defines]
> > >> >
> > >> >  [Sources.common]
> > >> >    PlatformDxe.c
> > >> > -  VirtioBlockIo.c
> > >> > +  VirtioDevices.c
> > >> >
> > >> >  [Packages]
> > >> >    EmbeddedPkg/EmbeddedPkg.dec
> > >> > @@ -41,7 +41,11 @@ [Guids]
> > >> >    gSgiClarkHeliosAcpiTablesFileGuid
> > >> >
> > >> >  [FeaturePcd]
> > >> > -  gArmSgiTokenSpaceGuid.PcdVirtioSupported
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkSupported
> > >> > +
> > >> > +[FixedPcd]
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkBaseAddress
> > >> > +  gArmSgiTokenSpaceGuid.PcdVirtioBlkSize
> > >> >
> > >> >  [Depex]
> > >> >    TRUE
> > >> > diff --git a/Platform/ARM/SgiPkg/Include/Guid/SgiVirtioDevicesFormSet.h b/Platform/ARM/SgiPkg/Include/Guid/SgiVirtioDevicesFormSet.h
> > >> > new file mode 100644
> > >> > index 000000000000..80d3e3ae4f91
> > >> > --- /dev/null
> > >> > +++ b/Platform/ARM/SgiPkg/Include/Guid/SgiVirtioDevicesFormSet.h
> > >> > @@ -0,0 +1,21 @@
> > >> > +/** @file
> > >> > +*
> > >> > +*  Copyright (c) 2018, ARM Limited. All rights reserved.
> > >> > +*
> > >> > +*  This program and the accompanying materials are licensed and made available
> > >> > +*  under the terms and conditions of the BSD License which accompanies this
> > >> > +*  distribution. The full text of the license may be found at
> > >> > +*  http://opensource.org/licenses/bsd-license.php
> > >> > +*
> > >> > +*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > >> > +*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > >> > +*
> > >> > +**/
> > >> > +
> > >> > +#ifndef  __SGI_VIRTIO_DEVICES_FORMSET_H__
> > >> > +#define  __SGI_VIRTIO_DEVICES_FORMSET_H__
> > >> > +
> > >> > +#define SGI_VIRTIO_BLOCK_GUID  \
> > >> > +  { 0x5a96cdcd, 0x6116, 0x4929, { 0xb7, 0x01, 0x3a, 0xc2, 0xfb, 0x1c, 0xe2, 0x28 } }
> > >> > +
> > >> > +#endif
> > >> > diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
> > >> > index a8708a5c4ce5..aa032c41f686 100644
> > >> > --- a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
> > >> > +++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
> > >> > @@ -17,9 +17,8 @@
> > >> >  #include <Library/HobLib.h>
> > >> >  #include <SgiPlatform.h>
> > >> >
> > >> > -EFI_STATUS
> > >> > -InitVirtioBlockIo (
> > >> > -  IN EFI_HANDLE         ImageHandle
> > >> > +VOID
> > >> > +InitVirtioDevices (
> > >> >    );
> > >> >
> > >> >  EFI_STATUS
> > >> > @@ -63,14 +62,7 @@ ArmSgiPkgEntryPoint (
> > >> >      return Status;
> > >> >    }
> > >> >
> > >> > -  Status = EFI_REQUEST_UNLOAD_IMAGE;
> > >> > -  if (FeaturePcdGet (PcdVirtioSupported)) {
> > >> > -    Status = InitVirtioBlockIo (ImageHandle);
> > >> > -    if (EFI_ERROR (Status)) {
> > >> > -      DEBUG ((DEBUG_ERROR, "%a: Failed to install Virtio Block device\n",
> > >> > -        __FUNCTION__));
> > >> > -    }
> > >> > -  }
> > >> > +  InitVirtioDevices ();
> > >> >
> > >> >    return Status;
> > >> >  }
> > >> > diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioDevices.c
> > >> > similarity index 41%
> > >> > rename from Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c
> > >> > rename to Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioDevices.c
> > >> > index 5b5863f4b806..4703aec06968 100644
> > >> > --- a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c
> > >> > +++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioDevices.c
> > >> > @@ -12,6 +12,7 @@
> > >> >
> > >> >  **/
> > >> >
> > >> > +#include <Guid/SgiVirtioDevicesFormSet.h>
> > >> >  #include <Library/VirtioMmioDeviceLib.h>
> > >> >  #include <Library/DevicePathLib.h>
> > >> >  #include <Library/DebugLib.h>
> > >> > @@ -20,12 +21,12 @@
> > >> >
> > >> >  #pragma pack (1)
> > >> >  typedef struct {
> > >> > -  VENDOR_DEVICE_PATH                  Vendor;
> > >> > +  VENDOR_DEVICE_PATH                  VendorDevicePath;
> > >> >    EFI_DEVICE_PATH_PROTOCOL            End;
> > >> > -} VIRTIO_BLK_DEVICE_PATH;
> > >> > +} VIRTIO_DEVICE_PATH;
> > >> >  #pragma pack ()
> > >> >
> > >> > -STATIC VIRTIO_BLK_DEVICE_PATH mVirtioBlockDevicePath =
> > >> > +STATIC VIRTIO_DEVICE_PATH mVirtioBlockDevicePath =
> > >> >  {
> > >> >    {
> > >> >      {
> > >> > @@ -36,7 +37,7 @@ STATIC VIRTIO_BLK_DEVICE_PATH mVirtioBlockDevicePath =
> > >> >          (UINT8)((sizeof (VENDOR_DEVICE_PATH)) >> 8)
> > >> >        }
> > >> >      },
> > >> > -    EFI_CALLER_ID_GUID,
> > >> > +    SGI_VIRTIO_BLOCK_GUID,
> > >> >    },
> > >> >    {
> > >> >      END_DEVICE_PATH_TYPE,
> > >> > @@ -49,33 +50,43 @@ STATIC VIRTIO_BLK_DEVICE_PATH mVirtioBlockDevicePath =
> > >> >  };
> > >> >
> > >> >  /**
> > >> > - * Entrypoint for 'VirtioBlockIo' driver
> > >> > - */
> > >> > -EFI_STATUS
> > >> > -InitVirtioBlockIo (
> > >> > -   IN EFI_HANDLE         ImageHandle
> > >> > +  Initialize platform Virtio devices.
> > >> > +
> > >> > +  @return None.
> > >> > +**/
> > >> > +VOID
> > >> > +InitVirtioDevices (
> > >> >    )
> > >> >  {
> > >> >    EFI_STATUS Status;
> > >> > +  STATIC EFI_HANDLE mVirtIoBlkController = NULL;
> > >> >
> > >> > -  Status = gBS->InstallProtocolInterface (&ImageHandle,
> > >> > -                  &gEfiDevicePathProtocolGuid, EFI_NATIVE_INTERFACE,
> > >> > -                  &mVirtioBlockDevicePath);
> > >> > -  if (EFI_ERROR (Status)) {
> > >> > -    DEBUG ((DEBUG_ERROR, "%a: Failed to install the EFI_DEVICE_PATH "
> > >> > -      "protocol for the virtio block device (Status == %r)\n",
> > >> > -      __FUNCTION__, Status));
> > >> > -    return Status;
> > >> > +  // Install protocol interface for storage device
> > >> > +  if ((FeaturePcdGet (PcdVirtioBlkSupported)) &&
> > >> > +      (FixedPcdGet32 (PcdVirtioBlkBaseAddress))) {
> > >> > +    Status = gBS->InstallProtocolInterface (&mVirtIoBlkController,
> > >> > +                    &gEfiDevicePathProtocolGuid, EFI_NATIVE_INTERFACE,
> > >> > +                    &mVirtioBlockDevicePath);
> > >> > +    if (EFI_ERROR (Status)) {
> > >> > +      DEBUG ((DEBUG_ERROR, "%a: Failed to install EFI_DEVICE_PATH protocol "
> > >> > +        "for Virtio Block device (Status = %r)\n",
> > >> > +        __FUNCTION__, Status));
> > >> > +    } else {
> > >> > +      // Declare the Virtio BlockIo device
> > >> > +      Status = VirtioMmioInstallDevice (FixedPcdGet32 (PcdVirtioBlkBaseAddress),
> > >> > +                 mVirtIoBlkController);
> > >> > +      if (EFI_ERROR (Status)) {
> > >> > +        DEBUG ((DEBUG_ERROR, "%a: Unable to find Virtio Block MMIO device "
> > >> > +          "(Status == %r)\n", __FUNCTION__, Status));
> > >> > +        gBS->UninstallProtocolInterface (
> > >> > +               mVirtIoBlkController,
> > >> > +               &gEfiDevicePathProtocolGuid,
> > >> > +               &mVirtioBlockDevicePath
> > >> > +             );
> > >> > +      } else {
> > >> > +        DEBUG ((DEBUG_INIT, "%a: Installed Virtio Block device\n",
> > >> > +          __FUNCTION__));
> > >> > +      }
> > >> > +    }
> > >> >    }
> > >> > -
> > >> > -  Status = VirtioMmioInstallDevice (SGI_EXP_SYSPH_VIRTIO_BLOCK_BASE, ImageHandle);
> > >> > -  if (EFI_ERROR (Status)) {
> > >> > -    DEBUG ((DEBUG_ERROR,
> > >> > -      "%a: Failed to install Virtio block device (Status == %r)\n",
> > >> > -      __FUNCTION__, Status));
> > >> > -    gBS->UninstallProtocolInterface (ImageHandle,
> > >> > -           &gEfiDevicePathProtocolGuid, &mVirtioBlockDevicePath);
> > >> > -  }
> > >> > -
> > >> > -  return Status;
> > >> >  }
> > >> > --
> > >> > 2.7.4
> > >> >
> > >> _______________________________________________
> > >> edk2-devel mailing list
> > >> edk2-devel at lists.01.org
> > >> https://lists.01.org/mailman/listinfo/edk2-devel
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel at lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel

Regards,
Vijayenthiran


More information about the edk2-devel mailing list