[edk2] [PATCH v2 edk2-platforms 06/20] Platform/Broadcom/RPi3: Add Interrupt and Device Tree drivers

Pete Batard pete at akeo.ie
Thu Dec 13 02:49:33 PST 2018


On 2018.12.12 21:09, Ard Biesheuvel wrote:
> On Mon, 10 Dec 2018 at 13:39, Pete Batard <pete at akeo.ie> wrote:
>>
>> Contributed-under: TianoCore Contribution Agreement 1.1
>> Signed-off-by: Pete Batard <pete at akeo.ie>
>> ---
>>   Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c   | 367 +++++++++++++++++++
>>   Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf |  48 +++
> 
> These look mostly fine, but please check for cosmetic issues (space
> before (, no space after a cast)

Sure.

> 
>>   Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c                       | 370 ++++++++++++++++++++
>>   Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf                     |  53 +++
> 
> Some comments below
> 
>>   4 files changed, 838 insertions(+)
>>
>> diff --git a/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c b/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c
>> new file mode 100644
>> index 000000000000..dda61665031d
>> --- /dev/null
>> +++ b/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c
>> @@ -0,0 +1,367 @@
>> +/** @file
>> + *
>> + *  Copyright (c) 2016, Linaro, Ltd. All rights reserved.
>> + *
>> + *  This program and the accompanying materials
>> + *  are licensed and made available under the terms and conditions of the BSD License
>> + *  which accompanies this distribution.  The full text of the license may be found at
>> + *  http://opensource.org/licenses/bsd-license.php
>> + *
>> + *  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>> + *  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>> + *
>> + **/
>> +
>> +#include <PiDxe.h>
>> +
>> +#include <Library/BaseLib.h>
>> +#include <Library/DebugLib.h>
>> +#include <Library/IoLib.h>
>> +#include <Library/UefiBootServicesTableLib.h>
>> +#include <Library/UefiLib.h>
>> +
>> +#include <IndustryStandard/Bcm2836.h>
>> +
>> +#include <Protocol/Cpu.h>
>> +#include <Protocol/HardwareInterrupt.h>
>> +
>> +//
>> +// This currently only implements support for the architected timer interrupts
>> +// on the per-CPU interrupt controllers.
>> +//
>> +#define NUM_IRQS                    (4)
>> +
>> +#ifdef MDE_CPU_AARCH64
>> +#define ARM_ARCH_EXCEPTION_IRQ      EXCEPT_AARCH64_IRQ
>> +#else
>> +#define ARM_ARCH_EXCEPTION_IRQ      EXCEPT_ARM_IRQ
>> +#endif
>> +
>> +STATIC CONST
>> +EFI_PHYSICAL_ADDRESS RegBase = FixedPcdGet32 (PcdInterruptBaseAddress);
>> +
>> +//
>> +// Notifications
>> +//
>> +STATIC EFI_EVENT                    mExitBootServicesEvent;
>> +STATIC HARDWARE_INTERRUPT_HANDLER   mRegisteredInterruptHandlers[NUM_IRQS];
>> +
>> +/**
>> +  Shutdown our hardware
>> +
>> +  DXE Core will disable interrupts and turn off the timer and disable interrupts
>> +  after all the event handlers have run.
>> +
>> +  @param[in]  Event   The Event that is being processed
>> +  @param[in]  Context Event Context
>> +**/
>> +STATIC
>> +VOID
>> +EFIAPI
>> +ExitBootServicesEvent (
>> +  IN EFI_EVENT  Event,
>> +  IN VOID       *Context
>> +  )
>> +{
>> +  // Disable all interrupts
>> +  MmioWrite32 (RegBase + BCM2836_INTC_TIMER_CONTROL_OFFSET, 0);
>> +}
>> +
>> +/**
>> +  Enable interrupt source Source.
>> +
>> +  @param This     Instance pointer for this protocol
>> +  @param Source   Hardware source of the interrupt
>> +
>> +  @retval EFI_SUCCESS       Source interrupt enabled.
>> +  @retval EFI_DEVICE_ERROR  Hardware could not be programmed.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +EnableInterruptSource (
>> +  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
>> +  IN HARDWARE_INTERRUPT_SOURCE          Source
>> +  )
>> +{
>> +  if (Source >= NUM_IRQS) {
>> +    ASSERT(FALSE);
>> +    return EFI_UNSUPPORTED;
>> +  }
>> +
>> +  MmioOr32 (RegBase + BCM2836_INTC_TIMER_CONTROL_OFFSET, 1 << Source);
>> +
>> +  return EFI_SUCCESS;
>> +}
>> +
>> +
>> +/**
>> +  Disable interrupt source Source.
>> +
>> +  @param This     Instance pointer for this protocol
>> +  @param Source   Hardware source of the interrupt
>> +
>> +  @retval EFI_SUCCESS       Source interrupt disabled.
>> +  @retval EFI_DEVICE_ERROR  Hardware could not be programmed.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +DisableInterruptSource (
>> +  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
>> +  IN HARDWARE_INTERRUPT_SOURCE          Source
>> +  )
>> +{
>> +  if (Source >= NUM_IRQS) {
>> +    ASSERT(FALSE);
>> +    return EFI_UNSUPPORTED;
>> +  }
>> +
>> +  MmioAnd32 (RegBase + BCM2836_INTC_TIMER_CONTROL_OFFSET, ~(1 << Source));
>> +
>> +  return EFI_SUCCESS;
>> +}
>> +
>> +/**
>> +  Register Handler for the specified interrupt source.
>> +
>> +  @param This     Instance pointer for this protocol
>> +  @param Source   Hardware source of the interrupt
>> +  @param Handler  Callback for interrupt. NULL to unregister
>> +
>> +  @retval EFI_SUCCESS Source was updated to support Handler.
>> +  @retval EFI_DEVICE_ERROR  Hardware could not be programmed.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +RegisterInterruptSource (
>> +  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
>> +  IN HARDWARE_INTERRUPT_SOURCE          Source,
>> +  IN HARDWARE_INTERRUPT_HANDLER         Handler
>> +  )
>> +{
>> +  if (Source >= NUM_IRQS) {
>> +    ASSERT (FALSE);
>> +    return EFI_UNSUPPORTED;
>> +  }
>> +
>> +  if (Handler == NULL && mRegisteredInterruptHandlers[Source] == NULL) {
>> +    return EFI_INVALID_PARAMETER;
>> +  }
>> +
>> +  if (Handler != NULL && mRegisteredInterruptHandlers[Source] != NULL) {
>> +    return EFI_ALREADY_STARTED;
>> +  }
>> +
>> +  mRegisteredInterruptHandlers[Source] = Handler;
>> +  return EnableInterruptSource(This, Source);
>> +}
>> +
>> +
>> +/**
>> +  Return current state of interrupt source Source.
>> +
>> +  @param This     Instance pointer for this protocol
>> +  @param Source   Hardware source of the interrupt
>> +  @param InterruptState  TRUE: source enabled, FALSE: source disabled.
>> +
>> +  @retval EFI_SUCCESS       InterruptState is valid
>> +  @retval EFI_DEVICE_ERROR  InterruptState is not valid
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +GetInterruptSourceState (
>> +  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
>> +  IN HARDWARE_INTERRUPT_SOURCE          Source,
>> +  IN BOOLEAN                            *InterruptState
>> +  )
>> +{
>> +  if (InterruptState == NULL) {
>> +    return EFI_INVALID_PARAMETER;
>> +  }
>> +
>> +  if (Source >= NUM_IRQS) {
>> +    ASSERT(FALSE);
>> +    return EFI_UNSUPPORTED;
>> +  }
>> +
>> +  *InterruptState = (MmioRead32 (RegBase + BCM2836_INTC_TIMER_CONTROL_OFFSET) &
>> +                     (1 << Source)) != 0;
>> +
>> +  return EFI_SUCCESS;
>> +}
>> +
>> +/**
>> +  Signal to the hardware that the End Of Intrrupt state
>> +  has been reached.
>> +
>> +  @param This     Instance pointer for this protocol
>> +  @param Source   Hardware source of the interrupt
>> +
>> +  @retval EFI_SUCCESS       Source interrupt EOI'ed.
>> +  @retval EFI_DEVICE_ERROR  Hardware could not be programmed.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +EndOfInterrupt (
>> +  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
>> +  IN HARDWARE_INTERRUPT_SOURCE          Source
>> +  )
>> +{
>> +  return EFI_SUCCESS;
>> +}
>> +
>> +
>> +/**
>> +  EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs.
>> +
>> +  @param  InterruptType    Defines the type of interrupt or exception that
>> +                           occurred on the processor.This parameter is processor
>> +                           architecture specific.
>> +  @param  SystemContext    A pointer to the processor context when
>> +                           the interrupt occurred on the processor.
>> +
>> +  @return None
>> +
>> +**/
>> +STATIC
>> +VOID
>> +EFIAPI
>> +IrqInterruptHandler (
>> +  IN EFI_EXCEPTION_TYPE           InterruptType,
>> +  IN EFI_SYSTEM_CONTEXT           SystemContext
>> +  )
>> +{
>> +  HARDWARE_INTERRUPT_HANDLER  InterruptHandler;
>> +  HARDWARE_INTERRUPT_SOURCE   Source;
>> +  UINT32                      RegVal;
>> +
>> +  RegVal = MmioRead32 (RegBase + BCM2836_INTC_TIMER_PENDING_OFFSET) &
>> +           ((1 << NUM_IRQS) - 1);
>> +  Source = HighBitSet32 (RegVal);
>> +  if (Source < 0) {
>> +    return;
>> +  }
>> +
>> +  InterruptHandler = mRegisteredInterruptHandlers [Source];
>> +  if (InterruptHandler != NULL) {
>> +    // Call the registered interrupt handler.
>> +    InterruptHandler (Source, SystemContext);
>> +  }
>> +}
>> +
>> +//
>> +// The protocol instance produced by this driver
>> +//
>> +STATIC EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptProtocol = {
>> +  RegisterInterruptSource,
>> +  EnableInterruptSource,
>> +  DisableInterruptSource,
>> +  GetInterruptSourceState,
>> +  EndOfInterrupt
>> +};
>> +
>> +STATIC VOID *mCpuArchProtocolNotifyEventRegistration;
>> +
>> +STATIC
>> +VOID
>> +EFIAPI
>> +CpuArchEventProtocolNotify (
>> +  IN  EFI_EVENT       Event,
>> +  IN  VOID            *Context
>> +  )
>> +{
>> +  EFI_CPU_ARCH_PROTOCOL   *Cpu;
>> +  EFI_STATUS              Status;
>> +
>> +  //
>> +  // Get the CPU protocol that this driver requires.
>> +  //
>> +  Status = gBS->LocateProtocol(&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu);
>> +  if (EFI_ERROR (Status)) {
>> +    return;
>> +  }
>> +
>> +  //
>> +  // Unregister the default exception handler.
>> +  //
>> +  Status = Cpu->RegisterInterruptHandler(Cpu, ARM_ARCH_EXCEPTION_IRQ, NULL);
>> +  if (EFI_ERROR (Status)) {
>> +    DEBUG ((DEBUG_ERROR, "%a: Cpu->RegisterInterruptHandler() - %r\n",
>> +      __FUNCTION__, Status));
>> +    ASSERT (FALSE);
>> +    return;
>> +  }
>> +
>> +  //
>> +  // Register to receive interrupts
>> +  //
>> +  Status = Cpu->RegisterInterruptHandler(Cpu, ARM_ARCH_EXCEPTION_IRQ,
>> +                                         IrqInterruptHandler);
>> +  if (EFI_ERROR (Status)) {
>> +    DEBUG ((DEBUG_ERROR, "%a: Cpu->RegisterInterruptHandler() - %r\n",
>> +      __FUNCTION__, Status));
>> +    ASSERT (FALSE);
>> +    return;
>> +  }
>> +}
>> +
>> +
>> +/**
>> +  Initialize the state information for the CPU Architectural Protocol
>> +
>> +  @param  ImageHandle   of the loaded driver
>> +  @param  SystemTable   Pointer to the System Table
>> +
>> +  @retval EFI_SUCCESS           Protocol registered
>> +  @retval EFI_OUT_OF_RESOURCES  Cannot allocate protocol data structure
>> +  @retval EFI_DEVICE_ERROR      Hardware problems
>> +
>> +**/
>> +EFI_STATUS
>> +InterruptDxeInitialize (
>> +  IN EFI_HANDLE         ImageHandle,
>> +  IN EFI_SYSTEM_TABLE   *SystemTable
>> +  )
>> +{
>> +  EFI_STATUS Status;
>> +  EFI_EVENT  CpuArchEvent;
>> +
>> +  // Make sure the Interrupt Controller Protocol is not already installed in the system.
>> +  ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid);
>> +
>> +  Status = gBS->InstallMultipleProtocolInterfaces(
>> +                  &ImageHandle,
>> +                  &gHardwareInterruptProtocolGuid,
>> +                  &gHardwareInterruptProtocol,
>> +                  NULL);
>> +  ASSERT_EFI_ERROR(Status);
>> +
>> +  //
>> +  // Install the interrupt handler as soon as the CPU arch protocol appears.
>> +  //
>> +  CpuArchEvent = EfiCreateProtocolNotifyEvent (
>> +                   &gEfiCpuArchProtocolGuid,
>> +                   TPL_CALLBACK,
>> +                   CpuArchEventProtocolNotify,
>> +                   NULL,
>> +                   &mCpuArchProtocolNotifyEventRegistration
>> +                   );
>> +  ASSERT (CpuArchEvent != NULL);
>> +
>> +  // Register for an ExitBootServicesEvent
>> +  Status = gBS->CreateEvent(EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY,
>> +                  ExitBootServicesEvent, NULL, &mExitBootServicesEvent);
>> +
>> +  ASSERT_EFI_ERROR(Status);
>> +
>> +  return Status;
>> +}
>> diff --git a/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
>> new file mode 100644
>> index 000000000000..831ae1bfeeab
>> --- /dev/null
>> +++ b/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
>> @@ -0,0 +1,48 @@
>> +#/** @file
>> +#
>> +#  Copyright (c) 2017, Andrei Warkentin <andrey.warkentin at gmail.com>
>> +#  Copyright (c) 2016 Linaro, Ltd. All rights reserved.
>> +#
>> +#  This program and the accompanying materials
>> +#  are licensed and made available under the terms and conditions of the BSD License
>> +#  which accompanies this distribution.  The full text of the license may be found at
>> +#  http://opensource.org/licenses/bsd-license.php
>> +#
>> +#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>> +#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>> +#
>> +#**/
>> +
>> +[Defines]
>> +  INF_VERSION                    = 0x00010019
>> +  BASE_NAME                      = Bcm2836InterruptDxe
>> +  FILE_GUID                      = 3944f2d7-2e09-4fc0-9e98-008375641453
>> +  MODULE_TYPE                    = DXE_DRIVER
>> +  VERSION_STRING                 = 1.0
>> +  ENTRY_POINT                    = InterruptDxeInitialize
>> +
>> +[Sources]
>> +  Bcm2836InterruptDxe.c
>> +
>> +[Packages]
>> +  MdePkg/MdePkg.dec
>> +  EmbeddedPkg/EmbeddedPkg.dec
>> +  Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
>> +
>> +[LibraryClasses]
>> +  BaseLib
>> +  DebugLib
>> +  IoLib
>> +  UefiBootServicesTableLib
>> +  UefiLib
>> +  UefiDriverEntryPoint
>> +
>> +[Protocols]
>> +  gHardwareInterruptProtocolGuid  ## PRODUCES
>> +  gEfiCpuArchProtocolGuid         ## CONSUMES ## NOTIFY
>> +
>> +[FixedPcd]
>> +  gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress
>> +
>> +[Depex]
>> +  TRUE
>> diff --git a/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c b/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c
>> new file mode 100644
>> index 000000000000..f2b0117629fd
>> --- /dev/null
>> +++ b/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c
>> @@ -0,0 +1,370 @@
>> +/** @file
>> + *
>> + *  Copyright (c) 2017, Andrey Warkentin <andrey.warkentin at gmail.com>
>> + *  Copyright (c) 2016, Linaro, Ltd. All rights reserved.
>> + *
>> + *  This program and the accompanying materials
>> + *  are licensed and made available under the terms and conditions of the BSD License
>> + *  which accompanies this distribution.  The full text of the license may be found at
>> + *  http://opensource.org/licenses/bsd-license.php
>> + *
>> + *  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>> + *  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>> + *
>> + **/
>> +#include <PiDxe.h>
>> +
>> +#include <Library/BaseLib.h>
>> +#include <Library/DebugLib.h>
>> +#include <Library/DxeServicesLib.h>
>> +#include <Library/MemoryAllocationLib.h>
>> +#include <Library/UefiBootServicesTableLib.h>
>> +#include <libfdt.h>
>> +
>> +#include <Protocol/RaspberryPiFirmware.h>
>> +
>> +#include <Guid/Fdt.h>
>> +
>> +STATIC VOID                             *mFdtImage;
>> +
>> +STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL   *mFwProtocol;
>> +
>> +STATIC
>> +VOID
>> +UpdateMacAddress (
>> +  VOID
>> +  )
>> +{
>> +  INTN          Node;
>> +  INTN          Retval;
>> +  EFI_STATUS    Status;
>> +  UINT8         MacAddress[6];
>> +
>> +  //
>> +  // Locate the node that the 'ethernet' alias refers to
>> +  //
>> +  Node = fdt_path_offset(mFdtImage, "ethernet");
>> +  if (Node < 0) {
>> +    DEBUG ((DEBUG_ERROR, "%a: failed to locate 'ethernet' alias\n",
>> +      __FUNCTION__));
>> +    return;
>> +  }
>> +
>> +  //
>> +  // Get the MAC address from the firmware
>> +  //
>> +  Status = mFwProtocol->GetMacAddress (MacAddress);
>> +  if (EFI_ERROR (Status)) {
>> +    DEBUG ((DEBUG_ERROR, "%a: failed to retrieve MAC address\n", __FUNCTION__));
>> +    return;
>> +  }
>> +
>> +  Retval = fdt_setprop (mFdtImage, Node, "mac-address", MacAddress,
>> +    sizeof MacAddress);
>> +  if (Retval != 0) {
>> +    DEBUG ((DEBUG_ERROR, "%a: failed to create 'mac-address' property (%d)\n",
>> +      __FUNCTION__, Retval));
>> +      return;
>> +  }
>> +
>> +  DEBUG ((DEBUG_INFO,
>> +    "%a: setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
>> +    __FUNCTION__, MacAddress[0], MacAddress[1], MacAddress[2], MacAddress[3],
>> +    MacAddress[4], MacAddress[5]));
>> +}
>> +
>> +STATIC
>> +VOID
>> +CleanMemoryNodes (
>> +  VOID
>> +  )
>> +{
>> +  INTN Node;
>> +  INT32 Retval;
>> +
>> +  Node = fdt_path_offset(mFdtImage, "/memory");
>> +  if (Node < 0) {
>> +    return;
>> +  }
>> +
>> +  /*
>> +   * Remove bogus memory nodes which can make the booted
>> +   * OS go crazy and ignore the UEFI map.
>> +   */
>> +  DEBUG ((DEBUG_INFO, "Removing bogus /memory\n"));
>> +  Retval = fdt_del_node(mFdtImage, Node);
>> +  if (Retval != 0) {
>> +    DEBUG ((DEBUG_ERROR, "Failed to remove /memory\n"));
>> +  }
>> +}
>> +
>> +STATIC
>> +VOID
>> +SanitizePSCI (
>> +  VOID
>> +  )
>> +{
>> +  INTN Node;
>> +  INTN Root;
>> +  INT32 Retval;
>> +
>> +  Root = fdt_path_offset(mFdtImage, "/");
>> +  ASSERT (Root >= 0);
>> +  if (Root < 0) {
>> +    return;
>> +  }
>> +
>> +  Node = fdt_path_offset(mFdtImage, "/psci");
>> +  if (Node < 0) {
>> +    Node = fdt_add_subnode(mFdtImage, Root, "psci");
>> +  }
>> +
>> +  ASSERT (Node >= 0);
>> +  if (Node < 0) {
>> +    DEBUG ((DEBUG_ERROR, "Couldn't find/create /psci\n"));
>> +    return;
>> +  }
>> +
>> +  Retval = fdt_setprop_string(mFdtImage, Node, "compatible",
>> +                               "arm,psci-1.0");
>> +  if (Retval != 0) {
>> +    DEBUG ((DEBUG_ERROR, "Couldn't set /psci compatible property\n"));
>> +    return;
>> +  }
>> +
>> +  Retval = fdt_setprop_string(mFdtImage, Node, "method", "smc");
>> +  if (Retval != 0) {
>> +    DEBUG ((DEBUG_ERROR, "Couldn't set /psci method property\n"));
>> +    return;
>> +  }
>> +
>> +  Root = fdt_path_offset(mFdtImage, "/cpus");
>> +  if (Root < 0) {
>> +    DEBUG ((DEBUG_ERROR, "No CPUs to update with PSCI enable-method?\n"));
>> +    return;
>> +  }
>> +
>> +  Node = fdt_first_subnode(mFdtImage, Root);
>> +  while (Node >= 0) {
>> +    if (fdt_setprop_string(mFdtImage, Node, "enable-method", "psci") != 0) {
>> +      DEBUG ((DEBUG_ERROR, "Failed to update enable-method for a CPU\n"));
>> +      return;
>> +    }
>> +
>> +    fdt_delprop(mFdtImage, Node, "cpu-release-addr");
>> +    Node = fdt_next_subnode(mFdtImage, Node);
>> +  }
>> +}
>> +
>> +STATIC
>> +VOID
>> +CleanSimpleFramebuffer (
>> +  VOID
>> +  )
>> +{
>> +  INTN Node;
>> +  INT32 Retval;
>> +
>> +  /*
>> +   * Should look for nodes by kind and remove aliases
>> +   * by matching against device.
>> +   */
>> +  Node = fdt_path_offset(mFdtImage, "display0");
>> +  if (Node < 0) {
>> +    return;
>> +  }
>> +
>> +  /*
>> +   * Remove bogus GPU-injected simple-framebuffer, which
>> +   * doesn't reflect the framebuffer built by UEFI.
>> +   */
>> +  DEBUG ((DEBUG_INFO, "Removing bogus display0\n"));
>> +  Retval = fdt_del_node(mFdtImage, Node);
>> +  if (Retval != 0) {
>> +    DEBUG ((DEBUG_ERROR, "Failed to remove display0\n"));
>> +    return;
>> +  }
>> +
>> +  Node =  fdt_path_offset(mFdtImage, "/aliases");
>> +  if (Node < 0) {
>> +    DEBUG ((DEBUG_ERROR, "Couldn't find /aliases to remove display0\n"));
>> +    return;
>> +  }
>> +
>> +  Retval = fdt_delprop(mFdtImage, Node, "display0");
>> +  if (Retval != 0) {
>> +    DEBUG ((DEBUG_ERROR, "Failed to remove display0 alias\n"));
>> +  }
>> +}
>> +
>> +#define MAX_CMDLINE_SIZE    512
>> +
>> +STATIC
>> +VOID
>> +UpdateBootArgs (
>> +  VOID
>> +  )
>> +{
>> +  INTN          Node;
>> +  INTN          Retval;
>> +  EFI_STATUS    Status;
>> +  CHAR8         *CommandLine;
>> +
>> +  //
>> +  // Locate the /chosen node
>> +  //
>> +  Node = fdt_path_offset(mFdtImage, "/chosen");
>> +  if (Node < 0) {
>> +    DEBUG ((DEBUG_ERROR, "%a: failed to locate /chosen node\n",
>> +      __FUNCTION__));
>> +    return;
>> +  }
>> +
>> +  //
>> +  // If /chosen/bootargs already exists, we want to add a space character
>> +  // before adding the firmware supplied arguments. However, the RpiFirmware
>> +  // protocol expects a 32-bit aligned buffer. So let's allocate 4 bytes of
>> +  // slack, and skip the first 3 when passing this buffer into libfdt.
>> +  //
>> +  CommandLine = AllocatePool (MAX_CMDLINE_SIZE) + 4;
>> +  if (!CommandLine) {
>> +    DEBUG ((DEBUG_ERROR, "%a: failed to allocate memory\n", __FUNCTION__));
>> +    return;
>> +  }
>> +
>> +  //
>> +  // Get the command line from the firmware
>> +  //
>> +  Status = mFwProtocol->GetCommandLine (MAX_CMDLINE_SIZE, CommandLine + 4);
>> +  if (EFI_ERROR (Status)) {
>> +    DEBUG ((DEBUG_ERROR, "%a: failed to retrieve command line\n",
>> +      __FUNCTION__));
>> +    return;
>> +  }
>> +
>> +  if (AsciiStrLen (CommandLine + 4) == 0) {
>> +    DEBUG ((DEBUG_INFO, "%a: empty command line received\n", __FUNCTION__));
>> +    return;
>> +  }
>> +
>> +  CommandLine[3] = ' ';
>> +
>> +  Retval = fdt_appendprop_string (mFdtImage, Node, "bootargs", &CommandLine[3]);
>> +  if (Retval != 0) {
>> +    DEBUG ((DEBUG_ERROR, "%a: failed to set /chosen/bootargs property (%d)\n",
>> +      __FUNCTION__, Retval));
>> +  }
>> +
>> +  DEBUG_CODE_BEGIN ();
>> +    CONST CHAR8    *Prop;
>> +    INT32         Length;
>> +    INT32         Index;
>> +
>> +    Node = fdt_path_offset (mFdtImage, "/chosen");
>> +    ASSERT (Node >= 0);
>> +
>> +    Prop = fdt_getprop (mFdtImage, Node, "bootargs", &Length);
>> +    ASSERT (Prop != NULL);
>> +
>> +    DEBUG ((DEBUG_INFO, "Command line set from firmware (length %d):\n'", Length));
>> +
>> +    for (Index = 0; Index < Length; Index++, Prop++) {
>> +      if (*Prop == '\0') {
>> +        continue;
>> +      }
>> +      DEBUG ((DEBUG_INFO, "%c", *Prop));
>> +    }
>> +
>> +    DEBUG ((DEBUG_INFO, "'\n"));
>> +  DEBUG_CODE_END ();
>> +
>> +  FreePool (CommandLine - 4);
>> +}
>> +
>> +
>> +/**
>> +  @param  ImageHandle   of the loaded driver
>> +  @param  SystemTable   Pointer to the System Table
>> +
>> +  @retval EFI_SUCCESS           Protocol registered
>> +  @retval EFI_OUT_OF_RESOURCES  Cannot allocate protocol data structure
>> +  @retval EFI_DEVICE_ERROR      Hardware problems
>> +
>> +**/
>> +EFI_STATUS
>> +EFIAPI
>> +RpiFdtDxeInitialize (
>> +  IN EFI_HANDLE         ImageHandle,
>> +  IN EFI_SYSTEM_TABLE   *SystemTable
>> +  )
>> +{
>> +  EFI_STATUS Status;
>> +  VOID       *FdtImage;
>> +  UINTN      FdtSize;
>> +  INT32      Retval;
>> +  BOOLEAN    Internal;
>> +
>> +  Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid, NULL,
>> +                  (VOID **)&mFwProtocol);
>> +  ASSERT_EFI_ERROR (Status);
>> +
>> +  Internal = FALSE;
>> +  FdtImage =  (VOID *) (UINTN) PcdGet32(PcdFdtBaseAddress);
>> +  Retval = fdt_check_header (FdtImage);
>> +  if (Retval == 0) {
>> +    /*
>> +     * Have FDT passed via config.txt.
>> +     */
>> +    FdtSize = fdt_totalsize (FdtImage);
>> +    DEBUG ((DEBUG_INFO, "DTB passed via config.txt of 0x%lx bytes\n", FdtSize));
>> +    Status = EFI_SUCCESS;
>> +  } else {
>> +    Internal = TRUE;
>> +    DEBUG ((DEBUG_INFO, "No/bad FDT at %p (%a), trying internal DTB...\n",
>> +            FdtImage, fdt_strerror (Retval)));
>> +    Status = GetSectionFromAnyFv (&gRaspberryPiFdtFileGuid, EFI_SECTION_RAW, 0,
>> +                                  &FdtImage, &FdtSize);
>> +    if (Status == EFI_SUCCESS) {
>> +      if (fdt_check_header (FdtImage) != 0) {
>> +        Status = EFI_INCOMPATIBLE_VERSION;
>> +      }
>> +    }
>> +  }
>> +
>> +  if (EFI_ERROR (Status)) {
>> +    DEBUG ((DEBUG_ERROR, "Failed to locate device tree: %r\n", Status));
>> +    return Status;
>> +  }
>> +
>> +  /*
>> +   * Probably overkill.
>> +   */
>> +  FdtSize += EFI_PAGE_SIZE * 2;
>> +  Status = gBS->AllocatePages (AllocateAnyPages, EfiRuntimeServicesData,
> 
> This should be boot services data. It is up to the OS to preserve it
> (or ignore it) and the firmware does not require a virtual mapping for
> its own use.

Okay. We'll change the type from EfiRuntimeServicesData to 
EfiBootServicesData.

>> +                               EFI_SIZE_TO_PAGES(FdtSize),
>> +                               (EFI_PHYSICAL_ADDRESS *) &mFdtImage);
>> +  if (EFI_ERROR (Status)) {
>> +    DEBUG ((DEBUG_ERROR, "Failed to allocate new device tree: %r\n", Status));
>> +    return Status;
>> +  }
>> +
>> +  Retval = fdt_open_into (FdtImage, mFdtImage, FdtSize);
>> +  ASSERT (Retval == 0);
>> +
>> +  SanitizePSCI ();
>> +  CleanMemoryNodes ();
>> +  CleanSimpleFramebuffer ();
>> +  UpdateMacAddress ();
>> +  if (Internal) {
>> +    /*
>> +     * A GPU-provided DTB already has the full command line.
>> +     */
>> +    UpdateBootArgs ();
>> +  }
>> +
>> +  DEBUG ((DEBUG_INFO, "Installed FDT is at %p\n", mFdtImage));
>> +  Status = gBS->InstallConfigurationTable (&gFdtTableGuid, mFdtImage);
>> +  ASSERT_EFI_ERROR (Status);
>> +
>> +  return Status;
>> +}
>> diff --git a/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf
>> new file mode 100644
>> index 000000000000..a79e9ddcdc8a
>> --- /dev/null
>> +++ b/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf
>> @@ -0,0 +1,53 @@
>> +#/** @file
>> +#
>> +#  Copyright (c) 2017, Andrei Warkentin <andrey.warkentin at gmail.com>
>> +#  Copyright (c) 2016, Linaro, Ltd. All rights reserved.
>> +#
>> +#  This program and the accompanying materials
>> +#  are licensed and made available under the terms and conditions of the BSD License
>> +#  which accompanies this distribution.  The full text of the license may be found at
>> +#  http://opensource.org/licenses/bsd-license.php
>> +#
>> +#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>> +#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>> +#
>> +#**/
>> +
>> +[Defines]
>> +  INF_VERSION                    = 0x00010019
>> +  BASE_NAME                      = RpiFdtDxe
>> +  FILE_GUID                      = 8505280f-109e-437e-9fe4-1aa09c7074d9
>> +  MODULE_TYPE                    = DXE_DRIVER
>> +  VERSION_STRING                 = 1.0
>> +  ENTRY_POINT                    = RpiFdtDxeInitialize
>> +
>> +[Sources]
>> +  RpiFdtDxe.c
>> +
>> +[Packages]
>> +  EmbeddedPkg/EmbeddedPkg.dec
>> +  MdePkg/MdePkg.dec
>> +  MdeModulePkg/MdeModulePkg.dec
>> +  Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
>> +
>> +[LibraryClasses]
>> +  BaseLib
>> +  DebugLib
>> +  DxeServicesLib
>> +  FdtLib
>> +  MemoryAllocationLib
>> +  UefiBootServicesTableLib
>> +  UefiDriverEntryPoint
>> +
>> +[Guids]
>> +  gFdtTableGuid
>> +  gRaspberryPiFdtFileGuid
>> +
>> +[Protocols]
>> +  gRaspberryPiFirmwareProtocolGuid              ## CONSUMES
>> +
>> +[Depex]
>> +  gRaspberryPiFirmwareProtocolGuid
>> +
>> +[FixedPcd]
>> +  gRaspberryPiTokenSpaceGuid.PcdFdtBaseAddress
>> --
>> 2.17.0.windows.1
>>



More information about the edk2-devel mailing list