[edk2] [PATCH 3/3] MdeModulePkg/NonDiscoverablePciDeviceDxe: add missing validation

Wang, Jian J jian.j.wang at intel.com
Sun Dec 16 16:16:57 PST 2018


Leif,

Thanks for reminding. I'll take care of it.

Regards,
Jian


> -----Original Message-----
> From: Leif Lindholm [mailto:leif.lindholm at linaro.org]
> Sent: Saturday, December 15, 2018 9:37 PM
> To: Ard Biesheuvel <ard.biesheuvel at linaro.org>
> Cc: Vladimir Olovyannikov <vladimir.olovyannikov at broadcom.com>; Zeng, Star
> <star.zeng at intel.com>; edk2-devel at lists.01.org; Ni, Ruiyu
> <ruiyu.ni at intel.com>; Wang, Jian J <jian.j.wang at intel.com>; Wu, Hao A
> <hao.a.wu at intel.com>
> Subject: Re: [PATCH 3/3] MdeModulePkg/NonDiscoverablePciDeviceDxe: add
> missing validation
> 
> Jian, Hao,
> 
> I guess Ray and Star are no longer maintainers of this package.
> This patch never got pushed - could you have a look please?
> 
> Regards,
> 
> Leif
> 
> On Fri, Sep 07, 2018 at 12:36:32PM +0200, Ard Biesheuvel wrote:
> > On 6 September 2018 at 20:55, Vladimir Olovyannikov
> > <vladimir.olovyannikov at broadcom.com> wrote:
> > > UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
> > > required checks were not performed. Perform parameters validation in
> > > NonDiscoverablePciDeviceDxe.
> > >
> > > Contributed-under: TianoCore Contribution Agreement 1.1
> > > Signed-off-by: Vladimir Olovyannikov
> <vladimir.olovyannikov at broadcom.com>
> >
> > Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
> >
> > > ---
> > >  .../NonDiscoverablePciDeviceIo.c              | 50 ++++++++++++++++++-
> > >  1 file changed, 49 insertions(+), 1 deletion(-)
> > >
> > > diff --git
> a/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciD
> eviceIo.c
> b/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciD
> eviceIo.c
> > > index 0e42ae4bf6ec..07118d59fd68 100644
> > > ---
> a/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciD
> eviceIo.c
> > > +++
> b/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciD
> eviceIo.c
> > > @@ -52,6 +52,10 @@ GetBarResource (
> > >
> > >    BarIndex -= (UINT8)Dev->BarOffset;
> > >
> > > +  if (BarIndex >= Dev->BarCount) {
> > > +    return EFI_UNSUPPORTED;
> > > +  }
> > > +
> > >    for (Desc = Dev->Device->Resources;
> > >         Desc->Desc != ACPI_END_TAG_DESCRIPTOR;
> > >         Desc = (VOID *)((UINT8 *)Desc + Desc->Len + 3)) {
> > > @@ -597,6 +601,19 @@ CoherentPciIoMap (
> > >    EFI_STATUS                            Status;
> > >    NON_DISCOVERABLE_PCI_DEVICE_MAP_INFO  *MapInfo;
> > >
> > > +  if (Operation != EfiPciIoOperationBusMasterRead &&
> > > +      Operation != EfiPciIoOperationBusMasterWrite &&
> > > +      Operation != EfiPciIoOperationBusMasterCommonBuffer) {
> > > +    return EFI_INVALID_PARAMETER;
> > > +  }
> > > +
> > > +  if (HostAddress   == NULL ||
> > > +      NumberOfBytes == NULL ||
> > > +      DeviceAddress == NULL ||
> > > +      Mapping       == NULL) {
> > > +    return EFI_INVALID_PARAMETER;
> > > +  }
> > > +
> > >    //
> > >    // If HostAddress exceeds 4 GB, and this device does not support 64-bit
> DMA
> > >    // addressing, we need to allocate a bounce buffer and copy over the data.
> > > @@ -720,6 +737,11 @@ CoherentPciIoAllocateBuffer (
> > >      return EFI_UNSUPPORTED;
> > >    }
> > >
> > > +  if ((MemoryType != EfiBootServicesData) &&
> > > +      (MemoryType != EfiRuntimeServicesData)) {
> > > +    return EFI_INVALID_PARAMETER;
> > > +  }
> > > +
> > >    //
> > >    // Allocate below 4 GB if the dual address cycle attribute has not
> > >    // been set. If the system has no memory available below 4 GB, there
> > > @@ -877,6 +899,10 @@ NonCoherentPciIoAllocateBuffer (
> > >    NON_DISCOVERABLE_DEVICE_UNCACHED_ALLOCATION *Alloc;
> > >    VOID                                        *AllocAddress;
> > >
> > > +  if (HostAddress == NULL) {
> > > +    return EFI_INVALID_PARAMETER;
> > > +  }
> > > +
> > >    Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
> > >
> > >    Status = CoherentPciIoAllocateBuffer (This, Type, MemoryType, Pages,
> > > @@ -995,6 +1021,19 @@ NonCoherentPciIoMap (
> > >    EFI_GCD_MEMORY_SPACE_DESCRIPTOR       GcdDescriptor;
> > >    BOOLEAN                               Bounce;
> > >
> > > +  if (HostAddress   == NULL ||
> > > +      NumberOfBytes == NULL ||
> > > +      DeviceAddress == NULL ||
> > > +      Mapping       == NULL) {
> > > +    return EFI_INVALID_PARAMETER;
> > > +  }
> > > +
> > > +  if (Operation != EfiPciIoOperationBusMasterRead &&
> > > +      Operation != EfiPciIoOperationBusMasterWrite &&
> > > +      Operation != EfiPciIoOperationBusMasterCommonBuffer) {
> > > +    return EFI_INVALID_PARAMETER;
> > > +  }
> > > +
> > >    MapInfo = AllocatePool (sizeof *MapInfo);
> > >    if (MapInfo == NULL) {
> > >      return EFI_OUT_OF_RESOURCES;
> > > @@ -1228,8 +1267,17 @@ PciIoAttributes (
> > >    NON_DISCOVERABLE_PCI_DEVICE   *Dev;
> > >    BOOLEAN                       Enable;
> > >
> > > +  #define DEV_SUPPORTED_ATTRIBUTES \
> > > +    (EFI_PCI_DEVICE_ENABLE |
> EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE)
> > > +
> > >    Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
> > >
> > > +  if (Attributes) {
> > > +      if ((Attributes & (~(DEV_SUPPORTED_ATTRIBUTES))) != 0) {
> > > +        return EFI_UNSUPPORTED;
> > > +      }
> > > +    }
> > > +
> > >    Enable = FALSE;
> > >    switch (Operation) {
> > >    case EfiPciIoAttributeOperationGet:
> > > @@ -1243,7 +1291,7 @@ PciIoAttributes (
> > >      if (Result == NULL) {
> > >        return EFI_INVALID_PARAMETER;
> > >      }
> > > -    *Result = EFI_PCI_DEVICE_ENABLE |
> EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE;
> > > +    *Result = DEV_SUPPORTED_ATTRIBUTES;
> > >      break;
> > >
> > >    case EfiPciIoAttributeOperationEnable:
> > > --
> > > 2.18.0
> > >


More information about the edk2-devel mailing list