[edk2] [PATCH v2 2/6] MdeModulePkg/Dxe/Gcd: disregard memory above MAX_ALLOC_ADDRESS

Ard Biesheuvel ard.biesheuvel at linaro.org
Wed Dec 19 12:56:36 PST 2018


Update the GCD memory map initialization code so it disregards
memory that is not addressable by the CPU at boot time. This
only affects the first memory descriptor that is added, other
memory descriptors are permitted that describe memory ranges
that may be accessible to the CPU itself only when executing
under the OS.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang at intel.com>
---
 MdeModulePkg/Core/Dxe/Gcd/Gcd.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/MdeModulePkg/Core/Dxe/Gcd/Gcd.c b/MdeModulePkg/Core/Dxe/Gcd/Gcd.c
index a76d2db73c46..504e14a74e1d 100644
--- a/MdeModulePkg/Core/Dxe/Gcd/Gcd.c
+++ b/MdeModulePkg/Core/Dxe/Gcd/Gcd.c
@@ -2284,7 +2284,7 @@ CoreInitializeMemoryServices (
     // region that is big enough to initialize the DXE core.  Always skip the PHIT Resource HOB.
     // The max address must be within the physically addressible range for the processor.
     //
-    HighAddress = MAX_ADDRESS;
+    HighAddress = MAX_ALLOC_ADDRESS;
     for (Hob.Raw = *HobStart; !END_OF_HOB_LIST(Hob); Hob.Raw = GET_NEXT_HOB(Hob)) {
       //
       // Skip the Resource Descriptor HOB that contains the PHIT
@@ -2300,7 +2300,7 @@ CoreInitializeMemoryServices (
       }
 
       //
-      // Skip Resource Descriptor HOBs that do not describe tested system memory below MAX_ADDRESS
+      // Skip Resource Descriptor HOBs that do not describe tested system memory below MAX_ALLOC_ADDRESS
       //
       ResourceHob = Hob.ResourceDescriptor;
       if (ResourceHob->ResourceType != EFI_RESOURCE_SYSTEM_MEMORY) {
@@ -2309,14 +2309,14 @@ CoreInitializeMemoryServices (
       if ((ResourceHob->ResourceAttribute & MEMORY_ATTRIBUTE_MASK) != TESTED_MEMORY_ATTRIBUTES) {
         continue;
       }
-      if ((ResourceHob->PhysicalStart + ResourceHob->ResourceLength) > (EFI_PHYSICAL_ADDRESS)MAX_ADDRESS) {
+      if ((ResourceHob->PhysicalStart + ResourceHob->ResourceLength) > (EFI_PHYSICAL_ADDRESS)MAX_ALLOC_ADDRESS) {
         continue;
       }
 
       //
       // Skip Resource Descriptor HOBs that are below a previously found Resource Descriptor HOB
       //
-      if (HighAddress != (EFI_PHYSICAL_ADDRESS)MAX_ADDRESS && ResourceHob->PhysicalStart <= HighAddress) {
+      if (HighAddress != (EFI_PHYSICAL_ADDRESS)MAX_ALLOC_ADDRESS && ResourceHob->PhysicalStart <= HighAddress) {
         continue;
       }
 
-- 
2.19.2



More information about the edk2-devel mailing list